On Thu, 16 Feb 2017, Stefano Stabellini wrote:
> > > > > AVG MIN MAX WARM MAX
> > > > >
> > > > > NODEBUG no WFI 1890 1800 3170 2070
> > > > > NODEBUG WFI 4850 4810 7030 4980
> > > > > NODEBUG no WFI credit2 2217 2090 3420 2650
> > > > > NODEBUG WFI credit2 8080 7890 10320 8300
> > > > >
> > > > > DEBUG no WFI 2252 2080 3320 2650
> > > > > DEBUG WFI 6500 6140 8520 8130
> > > > > DEBUG WFI, credit2 8050 7870 10680 8450
> > > > >
> > > > > DEBUG means Xen DEBUG build.
> > > > >
> > [...]
> > > > > As you can see, depending on whether the guest issues a WFI or
> > > > > not
> > > > > while
> > > > > waiting for interrupts, the results change significantly.
> > > > > Interestingly,
> > > > > credit2 does worse than credit1 in this area.
> > > > >
> > > > This is with current staging right?
> > >
> > > That's right.
> > >
> > So, when you have the chance, can I see the output of
> >
> > xl debug-key r
> > xl dmesg
> >
> > Both under Credit1 and Credit2?
>
> I'll see what I can do.
See attached.
(XEN) Xen version 4.9-unstable (sstabellini@) (aarch64-linux-gnu-gcc (Linaro
GCC 2014.05) 4.9.1 20140422 (prerelease)) debug=y Thu Feb 16 14:39:21 PST 2017
(XEN) Latest ChangeSet: Thu Feb 16 14:39:16 2017 -0800 git:4e0ef4d
(XEN) Processor: 410fd034: "ARM Limited", variant: 0x0, part 0xd03, rev 0x4
(XEN) 64-bit Execution:
(XEN) Processor Features: 0000000000002222 0000000000000000
(XEN) Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32
(XEN) Extensions: FloatingPoint AdvancedSIMD
(XEN) Debug Features: 0000000010305106 0000000000000000
(XEN) Auxiliary Features: 0000000000000000 0000000000000000
(XEN) Memory Model Features: 0000000000001122 0000000000000000
(XEN) ISA Features: 0000000000011120 0000000000000000
(XEN) 32-bit Execution:
(XEN) Processor Features: 00000131:00011011
(XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle
(XEN) Extensions: GenericTimer Security
(XEN) Debug Features: 03010066
(XEN) Auxiliary Features: 00000000
(XEN) Memory Model Features: 10201105 40000000 01260000 02102211
(XEN) ISA Features: 02101110 13112111 21232042 01112131 00011142 00011121
(XEN) Using PSCI-1.0 for SMP bringup
(XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 99998 KHz
(XEN) GICv2 initialization:
(XEN) gic_dist_addr=00000000f9010000
(XEN) gic_cpu_addr=00000000f9020000
(XEN) gic_hyp_addr=00000000f9040000
(XEN) gic_vcpu_addr=00000000f9060000
(XEN) gic_maintenance_irq=25
(XEN) GICv2: Adjusting CPU interface base to 0xf902f000
(XEN) GICv2: 192 lines, 4 cpus, secure (IID 0200143b).
(XEN) GICv2: WARNING: CPU0: Failed to configure IRQ26 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU0: Failed to configure IRQ27 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU0: Failed to configure IRQ30 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) Could not find scheduler: credit1
(XEN) Using 'SMP Credit Scheduler' (credit)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Allocated console ring of 32 KiB.
(XEN) Bringing up CPU1
(XEN) GICv2: WARNING: CPU1: Failed to configure IRQ26 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU1: Failed to configure IRQ27 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU1: Failed to configure IRQ30 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) CPU 1 booted.
(XEN) Bringing up CPU2
(XEN) GICv2: WARNING: CPU2: Failed to configure IRQ26 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU2: Failed to configure IRQ27 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU2: Failed to configure IRQ30 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) CPU 2 booted.
(XEN) Bringing up CPU3
(XEN) GICv2: WARNING: CPU3: Failed to configure IRQ26 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU3: Failed to configure IRQ27 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU3: Failed to configure IRQ30 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) CPU 3 booted.
(XEN) Brought up 4 CPUs
(XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID
(XEN) P2M: 3 levels with order-1 root, VTCR 0x80023558
(XEN) smmu: /amba/smmu@fd800000: probing hardware configuration...
(XEN) smmu: /amba/smmu@fd800000: SMMUv2 with:
(XEN) smmu: /amba/smmu@fd800000: stage 2 translation
(XEN) smmu: /amba/smmu@fd800000: stream matching with 48 register
groups, mask 0x7fff
(XEN) smmu: /amba/smmu@fd800000: 16 context banks (0 stage-2 only)
(XEN) smmu: /amba/smmu@fd800000: Stage-2: 40-bit IPA -> 48-bit PA
(XEN) smmu: /amba/smmu@fd800000: registered 26 master devices
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) build-id: 3162bd9a1aaa9749ea1c5a484a7062f60ea73550
(XEN) alternatives: Patching with alt table 00000000400f3c38 -> 00000000400f3fec
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading kernel from boot module @ 0000000000080000
(XEN) Loading ramdisk from boot module @ 00000000060af000
(XEN) Allocating 1:1 mappings totalling 1024MB for dom0:
(XEN) BANK[0] 0x00000040000000-0x00000080000000 (1024MB)
(XEN) Grant table range: 0x0000087fe00000-0x0000087fe61000
(XEN) smmu: /amba/smmu@fd800000: d0: p2maddr 0x000000087ff68000
(XEN) Loading zImage from 0000000000080000 to 0000000040080000-0000000043180000
(XEN) Loading dom0 initrd from 00000000060af000 to
0x0000000048200000-0x000000004a150400
(XEN) Allocating PPI 16 for event channel interrupt
(XEN) Loading dom0 DTB to 0x0000000048000000-0x0000000048006c4a
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 296kB init memory.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.6.0-xilinx (xbrbbot@xcosswbld01) (gcc version
5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #1 SMP Thu Dec 15 18:01:07 MST 2016
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: xen0 at I/O port 0x0 (options '')
[ 0.000000] bootconsole [xen0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 128 MiB at 0x0000000078000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] Xen 4.9 support found
[ 0.000000] percpu: Embedded 20 pages/cpu @ffffffc037f73000 s42240 r8192
d31488 u81920
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 258560
[ 0.000000] Kernel command line: console=hvc0 earlycon=xen earlyprintk=xen
maxcpus=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] software IO TLB [mem 0x72e00000-0x76e00000] (64MB) mapped at
[ffffffc032e00000-ffffffc036dfffff]
[ 0.000000] Memory: 790568K/1048576K available (8136K kernel code, 561K
rwdata, 2860K rodata, 460K init, 374K bss, 126936K reserved, 131072K
cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128
MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdffff0000 ( 247
GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008870000 ( 8128
KB)
[ 0.000000] .rodata : 0xffffff8008870000 - 0xffffff8008b3f000 ( 2876
KB)
[ 0.000000] .init : 0xffffff8008b3f000 - 0xffffff8008bb2000 ( 460
KB)
[ 0.000000] .data : 0xffffff8008bb2000 - 0xffffff8008c3e400 ( 561
KB)
[ 0.000000] vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7
GB maximum)
[ 0.000000] 0xffffffbe00000000 - 0xffffffbe00e00000 ( 14
MB actual)
[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108
KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16
MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024
MB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER20
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0
[ 0.000000] Architected cp15 timer(s) running at 99.99MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0x171015c6fb, max_idle_ns: 440795203665 ns
[ 0.000004] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every
4398046511101ns
[ 0.008279] Console: colour dummy device 80x25
[ 0.012382] console [hvc0] enabled
[ 0.012382] console [hvc0] enabled
[ 0.019204] bootconsole [xen0] disabled
[ 0.019204] bootconsole [xen0] disabled
[ 0.026913] Calibrating delay loop (skipped), value calculated using timer
frequency.. 199.99 BogoMIPS (lpj=399995)
[ 0.037362] pid_max: default: 32768 minimum: 301
[ 0.042141] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.048788] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.056539] ASID allocator initialised with 65536 entries
[ 0.061530] xen:grant_table: Grant tables using version 1 layout
[ 0.067499] Grant table initialized
[ 0.071037] xen:events: Using FIFO-based ABI
[ 0.075349] Xen: initializing cpu0
[ 0.079399] zynqmp_plat_init: pm node not found
[ 0.083456] EFI services will not be available.
[ 0.088061] Brought up 1 CPUs
[ 0.090992] SMP: Total of 1 processors activated.
[ 0.095763] CPU: All CPU(s) started at EL1
[ 0.099923] alternatives: patching kernel code
[ 0.104878] devtmpfs: initialized
[ 0.111860] DMI not present or invalid.
[ 0.111979] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.124334] xor: measuring software checksum speed
[ 0.166394] 8regs : 2177.000 MB/sec
[ 0.206457] 8regs_prefetch: 1934.000 MB/sec
[ 0.246520] 32regs : 2412.000 MB/sec
[ 0.286585] 32regs_prefetch: 2178.000 MB/sec
[ 0.286626] xor: using function: 32regs (2412.000 MB/sec)
[ 0.292173] NET: Registered protocol family 16
[ 0.296514] vdso: 2 pages (1 code @ ffffff8008876000, 1 data @
ffffff8008bb8000)
[ 0.303066] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.310704] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.316088] xen:swiotlb_xen: Warning: only able to allocate 4 MB for
software IO TLB
[ 0.324491] software IO TLB [mem 0x72000000-0x72400000] (4MB) mapped at
[ffffffc032000000-ffffffc0323fffff]
[ 0.334332] ARM CCI_400_r1 PMU driver probed
[ 0.337722] /amba/dma@fd500000: could not find phandle
[ 0.343190] /amba/dma@fd510000: could not find phandle
[ 0.348368] /amba/dma@fd520000: could not find phandle
[ 0.353562] /amba/dma@fd530000: could not find phandle
[ 0.358746] /amba/dma@fd540000: could not find phandle
[ 0.363946] /amba/dma@fd550000: could not find phandle
[ 0.369129] /amba/dma@fd560000: could not find phandle
[ 0.374321] /amba/dma@fd570000: could not find phandle
[ 0.379625] /amba/dma@ffa80000: could not find phandle
[ 0.384703] /amba/dma@ffa90000: could not find phandle
[ 0.389886] /amba/dma@ffaa0000: could not find phandle
[ 0.395083] /amba/dma@ffab0000: could not find phandle
[ 0.400270] /amba/dma@ffac0000: could not find phandle
[ 0.405464] /amba/dma@ffad0000: could not find phandle
[ 0.410651] /amba/dma@ffae0000: could not find phandle
[ 0.415844] /amba/dma@ffaf0000: could not find phandle
[ 0.421126] /amba/ethernet@ff0e0000: could not find phandle
[ 0.428928] /amba/spi@ff0f0000: could not find phandle
[ 0.432102] /amba/sdhci@ff160000: could not find phandle
[ 0.437225] /amba/sdhci@ff170000: could not find phandle
[ 0.442638] /amba/usb@fe200000: could not find phandle
[ 0.467070] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.536192] raid6: int64x1 gen() 409 MB/s
[ 0.604225] raid6: int64x1 xor() 430 MB/s
[ 0.672351] raid6: int64x2 gen() 617 MB/s
[ 0.740502] raid6: int64x2 xor() 559 MB/s
[ 0.808626] raid6: int64x4 gen() 907 MB/s
[ 0.876750] raid6: int64x4 xor() 685 MB/s
[ 0.944895] raid6: int64x8 gen() 1056 MB/s
[ 1.012962] raid6: int64x8 xor() 683 MB/s
[ 1.081131] raid6: neonx1 gen() 672 MB/s
[ 1.149234] raid6: neonx1 xor() 702 MB/s
[ 1.217382] raid6: neonx2 gen() 1044 MB/s
[ 1.285484] raid6: neonx2 xor() 925 MB/s
[ 1.353620] raid6: neonx4 gen() 1385 MB/s
[ 1.421726] raid6: neonx4 xor() 1079 MB/s
[ 1.489843] raid6: neonx8 gen() 1556 MB/s
[ 1.557977] raid6: neonx8 xor() 1131 MB/s
[ 1.558015] raid6: using algorithm neonx8 gen() 1556 MB/s
[ 1.562155] raid6: .... xor() 1131 MB/s, rmw enabled
[ 1.567169] raid6: using intx1 recovery algorithm
[ 1.572162] ACPI: Interpreter disabled.
[ 1.575851] xen:balloon: Initialising balloon driver
[ 1.581157] xen_balloon: Initialising balloon driver
[ 1.586566] SCSI subsystem initialized
[ 1.589843] usbcore: registered new interface driver usbfs
[ 1.595239] usbcore: registered new interface driver hub
[ 1.600594] usbcore: registered new device driver usb
[ 1.605749] media: Linux media interface: v0.10
[ 1.610279] Linux video capture interface: v2.00
[ 1.614952] pps_core: LinuxPPS API ver. 1 registered
[ 1.619939] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 1.629124] PTP clock support registered
[ 1.633131] EDAC MC: Ver: 3.0.0
[ 1.637530] dmi: Firmware registration failed.
[ 1.640838] FPGA manager framework
[ 1.644297] Advanced Linux Sound Architecture Driver Initialized.
[ 1.651805] clocksource: Switched to clocksource arch_sys_counter
[ 1.656639] VFS: Disk quotas dquot_6.6.0
[ 1.660555] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.667640] pnp: PnP ACPI: disabled
[ 1.677722] NET: Registered protocol family 2
[ 1.678115] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.683729] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 1.690352] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.696668] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.702620] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.709187] NET: Registered protocol family 1
[ 1.714143] RPC: Registered named UNIX socket transport module.
[ 1.719368] RPC: Registered udp transport module.
[ 1.724118] RPC: Registered tcp transport module.
[ 1.728875] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.735507] Trying to unpack rootfs image as initramfs...
[ 1.829211] Freeing initrd memory: 32064K (ffffffc008200000 -
ffffffc00a150000)
[ 1.831837] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 1.837381] audit: initializing netlink subsys (disabled)
[ 1.842785] audit: type=2000 audit(1.716:1): initialized
[ 1.849215] workingset: timestamp_bits=60 max_order=18 bucket_order=0
[ 1.855369] NFS: Registering the id_resolver key type
[ 1.859735] Key type id_resolver registered
[ 1.863946] Key type id_legacy registered
[ 1.868024] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.874794] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.890483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
247)
[ 1.892368] io scheduler noop registered
[ 1.896338] io scheduler deadline registered
[ 1.900671] io scheduler cfq registered (default)
[ 1.905913] nwl-pcie fd0e0000.pcie: Link is DOWN
[ 1.910114] PCI host bridge /amba/pcie@fd0e0000 ranges:
[ 1.915355] No bus range found for /amba/pcie@fd0e0000, using [bus 00-ff]
[ 1.922364] MEM 0xe0000000..0xefffffff -> 0xe0000000
[ 1.927547] MEM 0x600000000..0x7ffffffff -> 0x600000000
[ 1.933079] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
[ 1.939225] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.944764] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 1.951682] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff
pref]
(XEN) physdev.c:17:d0v0 PHYSDEVOP cmd=25: not implemented
(XEN) physdev.c:17:d0v0 PHYSDEVOP cmd=15: not implemented
[ 1.969418] pci 0000:00:00.0: Failed to add - passthrough or MSI/MSI-X might
fail!
[ 1.977117] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
[ 1.983421] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
[ 1.988983] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
[ 1.995839] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
[ 2.002833] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
[ 2.009840] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
[ 2.016839] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
[ 2.023862] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
[ 2.030855] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
[ 2.037859] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
[ 2.044870] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
[ 2.051885] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
[ 2.058876] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
[ 2.065892] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
[ 2.072891] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
[ 2.079906] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
[ 2.086911] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
[ 2.093913] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
[ 2.102037] xen:xen_evtchn: Event-channel device installed
[ 2.153318] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.155458] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 215, base_baud
= 6250000) is a xuartps
[ 2.164196] [drm] Initialized drm 1.1.0 20060810
[ 2.168225] Unable to detect cache hierarchy from DT for CPU 0
[ 2.178951] brd: module loaded
[ 2.182686] loop: module loaded
[ 2.182731] Invalid max_queues (4), will use default max: 1.
[ 2.186734] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps
0x3 impl platform mode
[ 2.195012] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp
fbs pio slum part ccc sds apst
[ 2.206047] scsi host0: ahci-ceva
[ 2.208400] scsi host1: ahci-ceva
[ 2.211527] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port
0x100 irq 212
[ 2.219494] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port
0x180 irq 212
[ 2.227654] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.234416] zynqmp-qspi ff0f0000.spi: rx bus width not found
[ 2.240531] m25p80 spi0.0: found n25q512a, expected m25p80
[ 2.245489] m25p80 spi0.0: n25q512a (131072 Kbytes)
[ 2.250216] 4 ofpart partitions found on MTD device spi0.0
[ 2.255731] Creating 4 MTD partitions on "spi0.0":
[ 2.260573] 0x000000000000-0x000001e00000 : "boot"
[ 2.265964] 0x000001e00000-0x000001e40000 : "bootenv"
[ 2.271076] 0x000001e40000-0x000004240000 : "kernel"
[ 2.276114] 0x000004240000-0x000008000000 : "spare"
[ 2.282518] libphy: Fixed MDIO Bus: probed
[ 2.285069] tun: Universal TUN/TAP device driver, 1.6
[ 2.289714] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 2.299512] CAN device driver interface
[ 2.300696] gpiod_set_value: invalid GPIO
[ 2.304298] libphy: MACB_mii_bus: probed
[ 2.311376] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at
0xff0e0000 irq 25 (00:0a:35:00:22:01)
[ 2.317773] TI DP83867 ff0e0000.etherne:0c: attached PHY driver [TI DP83867]
(mii_bus:phy_addr=ff0e0000.etherne:0c, irq=-1)
[ 2.329427] xen_netfront: Initialising Xen virtual ethernet driver
[ 2.335218] usbcore: registered new interface driver asix
[ 2.340620] usbcore: registered new interface driver ax88179_178a
[ 2.346749] usbcore: registered new interface driver cdc_ether
[ 2.352629] usbcore: registered new interface driver net1080
[ 2.358339] usbcore: registered new interface driver cdc_subset
[ 2.364306] usbcore: registered new interface driver zaurus
[ 2.369953] usbcore: registered new interface driver cdc_ncm
[ 2.377229] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.382206] ehci-pci: EHCI PCI platform driver
[ 2.386955] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.392245] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus
number 1
[ 2.400870] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version
0x100 quirks 0x00010010
[ 2.408717] xhci-hcd xhci-hcd.0.auto: irq 220, io mem 0xfe200000
[ 2.414936] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.421555] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.428815] usb usb1: Product: xHCI Host Controller
[ 2.433743] usb usb1: Manufacturer: Linux 4.6.0-xilinx xhci-hcd
[ 2.439707] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 2.444940] hub 1-0:1.0: USB hub found
[ 2.448559] hub 1-0:1.0: 1 port detected
[ 2.452549] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.457971] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus
number 2
[ 2.465711] usb usb2: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 2.473878] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.480630] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.487889] usb usb2: Product: xHCI Host Controller
[ 2.492823] usb usb2: Manufacturer: Linux 4.6.0-xilinx xhci-hcd
[ 2.498787] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 2.503975] hub 2-0:1.0: USB hub found
[ 2.507586] hub 2-0:1.0: 1 port detected
[ 2.511689] usbcore: registered new interface driver uas
[ 2.516936] usbcore: registered new interface driver usb-storage
[ 2.523312] mousedev: PS/2 mouse device common for all mice
[ 2.529083] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as
rtc0
[ 2.535862] i2c /dev entries driver
[ 2.541605] pca953x 0-0020: interrupt support not compiled in
[ 2.546955] pca953x 0-0021: interrupt support not compiled in
[ 2.551014] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 201
[ 2.557191] ata2: SATA link down (SStatus 0 SControl 330)
[ 2.562484] ata1: SATA link down (SStatus 0 SControl 330)
[ 2.568159] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 202
[ 2.574911] i2c i2c-0: Added multiplexed i2c bus 2
[ 2.579665] i2c i2c-0: Added multiplexed i2c bus 3
[ 2.584655] i2c i2c-0: Added multiplexed i2c bus 4
[ 2.589068] i2c i2c-0: Added multiplexed i2c bus 5
[ 2.593352] pca954x 0-0075: registered 4 multiplexed busses for I2C mux
pca9544
[ 2.601179] at24 6-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
[ 2.607451] i2c i2c-6: Failed to register i2c client 24c08 at 0x55 (-16)
[ 2.614197] i2c i2c-6: of_i2c: Failure registering
/amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@55
[ 2.623186] i2c i2c-6: Failed to register i2c client 24c08 at 0x56 (-16)
[ 2.629927] i2c i2c-6: of_i2c: Failure registering
/amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@56
[ 2.638934] i2c i2c-6: Failed to register i2c client 24c08 at 0x57 (-16)
[ 2.645677] i2c i2c-6: of_i2c: Failure registering
/amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@57
[ 2.654674] i2c i2c-1: Added multiplexed i2c bus 6
[ 2.659968] i2c i2c-1: Added multiplexed i2c bus 7
[ 2.664636] i2c i2c-1: Added multiplexed i2c bus 8
[ 2.669482] i2c i2c-1: Added multiplexed i2c bus 9
[ 2.674317] i2c i2c-1: Added multiplexed i2c bus 10
[ 2.679198] i2c i2c-1: Added multiplexed i2c bus 11
[ 2.684097] i2c i2c-1: Added multiplexed i2c bus 12
[ 2.689037] i2c i2c-1: Added multiplexed i2c bus 13
[ 2.693771] pca954x 1-0074: registered 8 multiplexed busses for I2C switch
pca9548
[ 2.701596] i2c i2c-1: Added multiplexed i2c bus 14
[ 2.706487] i2c i2c-1: Added multiplexed i2c bus 15
[ 2.711445] i2c i2c-1: Added multiplexed i2c bus 16
[ 2.716584] i2c i2c-1: Added multiplexed i2c bus 17
[ 2.721445] i2c i2c-1: Added multiplexed i2c bus 18
[ 2.726229] i2c i2c-1: Added multiplexed i2c bus 19
[ 2.731187] i2c i2c-1: Added multiplexed i2c bus 20
[ 2.736091] i2c i2c-1: Added multiplexed i2c bus 21
[ 2.740828] pca954x 1-0075: registered 8 multiplexed busses for I2C switch
pca9548
[ 2.750093] ina2xx 2-0040: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.755179] ina2xx 2-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.761582] ina2xx 2-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.768009] ina2xx 2-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.774384] ina2xx 2-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.780774] ina2xx 2-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.787182] ina2xx 2-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.793590] ina2xx 2-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.799996] ina2xx 2-004a: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.806384] ina2xx 2-004b: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.812869] ina2xx 3-0040: power monitor ina226 (Rshunt = 2000 uOhm)
[ 2.819187] ina2xx 3-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.825588] ina2xx 3-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.831994] ina2xx 3-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.838399] ina2xx 3-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.844799] ina2xx 3-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.851191] ina2xx 3-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.857596] ina2xx 3-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.892592] EDAC MC: ECC not enabled
[ 2.892881] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac
controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
[ 2.902927] sdhci: Secure Digital Host Controller Interface driver
[ 2.909051] sdhci: Copyright(c) Pierre Ossman
[ 2.913467] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.919334] sdhci-arasan ff160000.sdhci: "xlnx,mio_bank " property is
missing.
[ 2.926451] sdhci-arasan: probe of ff160000.sdhci failed with error -22
[ 2.971794] mmc0: SDHCI controller on ff170000.sdhci [ff170000.sdhci] using
ADMA 64-bit
[ 2.974397] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.980436] usbcore: registered new interface driver usbhid
[ 2.985915] usbhid: USB HID core driver
[ 3.006852] si570 8-005d: registered, current frequency 300000000 Hz
[ 3.031440] si570 9-005d: registered, current frequency 148500000 Hz
[ 3.032480] fpga_manager fpga0: Xilinx ZynqMp FPGA Manager registered
[ 3.039447] pktgen: Packet Generator for packet performance testing.
Version: 2.75
[ 3.046764] Initializing XFRM netlink socket
[ 3.050727] NET: Registered protocol family 10
[ 3.057680] sit: IPv6 over IPv4 tunneling driver
[ 3.060216] NET: Registered protocol family 17
[ 3.064351] NET: Registered protocol family 15
[ 3.068838] can: controller area network core (rev 20120528 abi 9)
[ 3.075093] NET: Registered protocol family 29
[ 3.079572] can: raw protocol (rev 20120528)
[ 3.083890] can: broadcast manager protocol (rev 20120528 t)
[ 3.089600] can: netlink gateway (rev 20130117) max_hops=1
[ 3.095299] 9pnet: Installing 9P2000 support
[ 3.099481] Key type dns_resolver registered
[ 3.106448] registered taskstats version 1
[ 3.108418] Btrfs loaded
[ 3.114808] rtc_zynqmp ffa60000.rtc: setting system clock to 1986-12-22
00:43:37 UTC (535596217)
[ 3.119494] ALSA device list:
[ 3.122394] No soundcards found.
[ 3.129402] Freeing unused kernel memory: 460K (ffffff8008b3f000 -
ffffff8008bb2000)
INIT: version 2.88 booting
[ 4.087687] random: dd urandom read with 7 bits of entropy available
Fri Dec 16 01:23:11 UTC 2016
Starting internet superserver: inetd.
INIT: Entering runlevel: 5
Configuring network interfaces... [ 4.186752] IPv6: ADDRCONF(NETDEV_UP):
eth0: link is not ready
udhcpc (v1.24.1) started
Sending discover...
[ 6.308108] macb ff0e0000.ethernet eth0: link up (1000/Full)
[ 6.308242] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sending discover...
Sending select for 10.0.0.191...
Lease of 10.0.0.191 obtained, lease time 604800
/etc/udhcpc.d/50default: Adding DNS 75.75.75.75
/etc/udhcpc.d/50default: Adding DNS 75.75.76.76
done.
Starting OpenBSD Secure Shell server: sshd
generating ssh RSA key...
generating ssh ECDSA key...
generating ssh DSA key...
generating ssh ED25519 key...
done.
Starting syslogd/klogd: done
Starting /usr/sbin/xenstored....
Setting domain 0 name, domid and JSON config...
libxl: error: libxl.c:689:libxl_domain_info: getting domain info list:
Permission denied
libxl: error: libxl_dom.c:1127:libxl__userdata_path: unable to find domain info
for domain 0: Permission denied
cannot store stub json config for domain 0
Starting xenconsoled...
Starting QEMU as disk backend for dom0
/etc/rc5.d/S80xencommons: line 102: /usr/bin/qemu-system-i386: No such file or
directory
Starting domain watchdog daemon: xenwatchdogd startup
PetaLinux 2016.4 plnx_aarch64 /dev/hvc0
plnx_aarch64 login: root
root@plnx_aarch64:~# [ 33.180039] random: nonblocking pool is initialized
(XEN)
(XEN) TBM Jan 25 2017 12:45:38 running on xen-guest_irq_latency
(XEN) MIDR=410fd034
(XEN) D$ L1 32KB linesize=64b ways=4 sets=128
(XEN) I$ L1 32KB linesize=64b ways=2 sets=256
(XEN) D$ L2 1024KB linesize=64b ways=16 sets=1024
(XEN) I$ L2 1024KB linesize=64b ways=16 sets=1024
(XEN) plat_init_a64
(XEN) EL1 I and D caches enabled
(XEN) RDO: enable MMU
(XEN) RDO: Still here? EL1 S1 MMU is on
(XEN) CNTFRQ=99998999 Hz k=10
(XEN) latency (ns): max=8470 warm_max=0 min=8470 avg=8470
(XEN) latency (ns): max=8470 warm_max=0 min=6700 avg=8249
(XEN) latency (ns): max=8470 warm_max=6580 min=6580 avg=8041
(XEN) latency (ns): max=8470 warm_max=6600 min=6580 avg=7861
(XEN) latency (ns): max=8470 warm_max=6600 min=6530 avg=7695
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=7525
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=7392
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=7281
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=7178
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=7102
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=7020
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6948
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6886
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6837
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6794
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6769
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6725
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6696
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6663
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6644
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6628
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6616
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6591
(XEN) latency (ns): max=8470 warm_max=6600 min=6330 avg=6565
(XEN) latency (ns): max=8470 warm_max=6660 min=6330 avg=6576
(XEN) latency (ns): max=8470 warm_max=6660 min=6330 avg=6558
(XEN) latency (ns): max=8470 warm_max=6660 min=6180 avg=6511
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6555
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6535
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6522
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6507
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6497
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6494
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6484
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6478
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6464
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6461
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6462
(XEN) latency (ns): max=8470 warm_max=6870 min=6180 avg=6457
(XEN) sched_smt_power_savings: disabled
(XEN) NOW=56019474589
(XEN) Online Cpus: 0-3
(XEN) Cpupool 0:
(XEN) Cpus: 0-3
(XEN) Scheduler: SMP Credit Scheduler (credit)
(XEN) info:
(XEN) ncpus = 4
(XEN) master = 0
(XEN) credit = 1200
(XEN) credit balance = 0
(XEN) weight = 256
(XEN) runq_sort = 260
(XEN) default-weight = 256
(XEN) tslice = 30ms
(XEN) ratelimit = 1000us
(XEN) credits per msec = 10
(XEN) ticks per tslice = 3
(XEN) migration delay = 0us
(XEN) idlers: 00000000,00000000,00000000,0000000e
(XEN) active vcpus:
(XEN) 1: [0.0] pri=0 flags=0 cpu=0 credit=96 [w=256,cap=0]
(XEN) CPUs info:
(XEN) CPU[00] sort=260, sibling=00000000,00000000,00000000,00000001,
core=00000000,00000000,00000000,00000001
(XEN) run: [0.0] pri=0 flags=0 cpu=0 credit=96 [w=256,cap=0]
(XEN) 1: [32767.0] pri=-64 flags=0 cpu=0
(XEN) CPU[01] sort=260, sibling=00000000,00000000,00000000,00000002,
core=00000000,00000000,00000000,00000002
(XEN) run: [32767.1] pri=-64 flags=0 cpu=1
(XEN) CPU[02] sort=260, sibling=00000000,00000000,00000000,00000004,
core=00000000,00000000,00000000,00000004
(XEN) run: [32767.2] pri=-64 flags=0 cpu=2
(XEN) CPU[03] sort=260, sibling=00000000,00000000,00000000,00000008,
core=00000000,00000000,00000000,00000008
(XEN) run: [32767.3] pri=-64 flags=0 cpu=3
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6629
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6596
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6579
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6570
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6562
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6555
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6534
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6505
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6480
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6473
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6459
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6448
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6447
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6438
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6427
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6432
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6423
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6425
(XEN) latency (ns): max=8470 warm_max=7840 min=6180 avg=6414
(XEN) Xen version 4.9-unstable (sstabellini@) (aarch64-linux-gnu-gcc (Linaro
GCC 2014.05) 4.9.1 20140422 (prerelease)) debug=y Thu Feb 16 14:55:12 PST 2017
(XEN) Latest ChangeSet: Thu Feb 16 14:39:16 2017 -0800 git:4e0ef4d-dirty
(XEN) Processor: 410fd034: "ARM Limited", variant: 0x0, part 0xd03, rev 0x4
(XEN) 64-bit Execution:
(XEN) Processor Features: 0000000000002222 0000000000000000
(XEN) Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32
(XEN) Extensions: FloatingPoint AdvancedSIMD
(XEN) Debug Features: 0000000010305106 0000000000000000
(XEN) Auxiliary Features: 0000000000000000 0000000000000000
(XEN) Memory Model Features: 0000000000001122 0000000000000000
(XEN) ISA Features: 0000000000011120 0000000000000000
(XEN) 32-bit Execution:
(XEN) Processor Features: 00000131:00011011
(XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle
(XEN) Extensions: GenericTimer Security
(XEN) Debug Features: 03010066
(XEN) Auxiliary Features: 00000000
(XEN) Memory Model Features: 10201105 40000000 01260000 02102211
(XEN) ISA Features: 02101110 13112111 21232042 01112131 00011142 00011121
(XEN) Using PSCI-1.0 for SMP bringup
(XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 99998 KHz
(XEN) GICv2 initialization:
(XEN) gic_dist_addr=00000000f9010000
(XEN) gic_cpu_addr=00000000f9020000
(XEN) gic_hyp_addr=00000000f9040000
(XEN) gic_vcpu_addr=00000000f9060000
(XEN) gic_maintenance_irq=25
(XEN) GICv2: Adjusting CPU interface base to 0xf902f000
(XEN) GICv2: 192 lines, 4 cpus, secure (IID 0200143b).
(XEN) GICv2: WARNING: CPU0: Failed to configure IRQ26 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU0: Failed to configure IRQ27 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU0: Failed to configure IRQ30 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2)
(XEN) Initializing Credit2 scheduler
(XEN) load_precision_shift: 18
(XEN) load_window_shift: 30
(XEN) underload_balance_tolerance: 0
(XEN) overload_balance_tolerance: -3
(XEN) runqueues arrangement: socket
(XEN) load tracking window length 1073741824 ns
(XEN) Adding cpu 0 to runqueue 0
(XEN) First cpu on runqueue, activating
(XEN) Allocated console ring of 32 KiB.
(XEN) Bringing up CPU1
(XEN) GICv2: WARNING: CPU1: Failed to configure IRQ26 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU1: Failed to configure IRQ27 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU1: Failed to configure IRQ30 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) Adding cpu 1 to runqueue 0
(XEN) CPU 1 booted.
(XEN) Bringing up CPU2
(XEN) GICv2: WARNING: CPU2: Failed to configure IRQ26 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU2: Failed to configure IRQ27 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU2: Failed to configure IRQ30 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) Adding cpu 2 to runqueue 0
(XEN) CPU 2 booted.
(XEN) Bringing up CPU3
(XEN) GICv2: WARNING: CPU3: Failed to configure IRQ26 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU3: Failed to configure IRQ27 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) GICv2: WARNING: CPU3: Failed to configure IRQ30 as Edge-triggered. H/w
forces to Level-triggered.
(XEN) Adding cpu 3 to runqueue 0
(XEN) CPU 3 booted.
(XEN) Brought up 4 CPUs
(XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID
(XEN) P2M: 3 levels with order-1 root, VTCR 0x80023558
(XEN) smmu: /amba/smmu@fd800000: probing hardware configuration...
(XEN) smmu: /amba/smmu@fd800000: SMMUv2 with:
(XEN) smmu: /amba/smmu@fd800000: stage 2 translation
(XEN) smmu: /amba/smmu@fd800000: stream matching with 48 register
groups, mask 0x7fff
(XEN) smmu: /amba/smmu@fd800000: 16 context banks (0 stage-2 only)
(XEN) smmu: /amba/smmu@fd800000: Stage-2: 40-bit IPA -> 48-bit PA
(XEN) smmu: /amba/smmu@fd800000: registered 26 master devices
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) build-id: 6f4fcc598664b1af0ae7b2e2f64b6ed3f140ef2f
(XEN) alternatives: Patching with alt table 00000000400f3c48 -> 00000000400f3ffc
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading kernel from boot module @ 0000000000080000
(XEN) Loading ramdisk from boot module @ 00000000060af000
(XEN) Allocating 1:1 mappings totalling 1024MB for dom0:
(XEN) BANK[0] 0x00000040000000-0x00000080000000 (1024MB)
(XEN) Grant table range: 0x0000087fe00000-0x0000087fe61000
(XEN) smmu: /amba/smmu@fd800000: d0: p2maddr 0x000000087ff62000
(XEN) Loading zImage from 0000000000080000 to 0000000040080000-0000000043180000
(XEN) Loading dom0 initrd from 00000000060af000 to
0x0000000048200000-0x000000004a150400
(XEN) Allocating PPI 16 for event channel interrupt
(XEN) Loading dom0 DTB to 0x0000000048000000-0x0000000048006c4a
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 296kB init memory.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.6.0-xilinx (xbrbbot@xcosswbld01) (gcc version
5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #1 SMP Thu Dec 15 18:01:07 MST 2016
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: xen0 at I/O port 0x0 (options '')
[ 0.000000] bootconsole [xen0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 128 MiB at 0x0000000078000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] Xen 4.9 support found
[ 0.000000] percpu: Embedded 20 pages/cpu @ffffffc037f73000 s42240 r8192
d31488 u81920
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 258560
[ 0.000000] Kernel command line: console=hvc0 earlycon=xen earlyprintk=xen
maxcpus=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] software IO TLB [mem 0x72e00000-0x76e00000] (64MB) mapped at
[ffffffc032e00000-ffffffc036dfffff]
[ 0.000000] Memory: 790568K/1048576K available (8136K kernel code, 561K
rwdata, 2860K rodata, 460K init, 374K bss, 126936K reserved, 131072K
cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128
MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdffff0000 ( 247
GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008870000 ( 8128
KB)
[ 0.000000] .rodata : 0xffffff8008870000 - 0xffffff8008b3f000 ( 2876
KB)
[ 0.000000] .init : 0xffffff8008b3f000 - 0xffffff8008bb2000 ( 460
KB)
[ 0.000000] .data : 0xffffff8008bb2000 - 0xffffff8008c3e400 ( 561
KB)
[ 0.000000] vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7
GB maximum)
[ 0.000000] 0xffffffbe00000000 - 0xffffffbe00e00000 ( 14
MB actual)
[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108
KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16
MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024
MB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER4
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER8
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER12
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER16
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER20
(XEN) d0v0: vGICD: unhandled word write 0xffffffff to ICACTIVER0
[ 0.000000] Architected cp15 timer(s) running at 99.99MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0x171015c6fb, max_idle_ns: 440795203665 ns
[ 0.000004] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every
4398046511101ns
[ 0.008283] Console: colour dummy device 80x25
[ 0.012378] console [hvc0] enabled
[ 0.012378] console [hvc0] enabled
[ 0.019210] bootconsole [xen0] disabled
[ 0.019210] bootconsole [xen0] disabled
[ 0.026913] Calibrating delay loop (skipped), value calculated using timer
frequency.. 199.99 BogoMIPS (lpj=399995)
[ 0.037368] pid_max: default: 32768 minimum: 301
[ 0.042142] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.048789] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.056540] ASID allocator initialised with 65536 entries
[ 0.061531] xen:grant_table: Grant tables using version 1 layout
[ 0.067507] Grant table initialized
[ 0.071038] xen:events: Using FIFO-based ABI
[ 0.075349] Xen: initializing cpu0
[ 0.079398] zynqmp_plat_init: pm node not found
[ 0.083458] EFI services will not be available.
[ 0.088063] Brought up 1 CPUs
[ 0.090993] SMP: Total of 1 processors activated.
[ 0.095764] CPU: All CPU(s) started at EL1
[ 0.099919] alternatives: patching kernel code
[ 0.104879] devtmpfs: initialized
[ 0.111828] DMI not present or invalid.
[ 0.111948] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.124339] xor: measuring software checksum speed
[ 0.166394] 8regs : 2177.000 MB/sec
[ 0.206457] 8regs_prefetch: 1934.000 MB/sec
[ 0.246520] 32regs : 2412.000 MB/sec
[ 0.286585] 32regs_prefetch: 2178.000 MB/sec
[ 0.286626] xor: using function: 32regs (2412.000 MB/sec)
[ 0.292168] NET: Registered protocol family 16
[ 0.296515] vdso: 2 pages (1 code @ ffffff8008876000, 1 data @
ffffff8008bb8000)
[ 0.303066] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.310705] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.316082] xen:swiotlb_xen: Warning: only able to allocate 4 MB for
software IO TLB
[ 0.324493] software IO TLB [mem 0x72000000-0x72400000] (4MB) mapped at
[ffffffc032000000-ffffffc0323fffff]
[ 0.334331] ARM CCI_400_r1 PMU driver probed
[ 0.337730] /amba/dma@fd500000: could not find phandle
[ 0.343186] /amba/dma@fd510000: could not find phandle
[ 0.348369] /amba/dma@fd520000: could not find phandle
[ 0.353556] /amba/dma@fd530000: could not find phandle
[ 0.358747] /amba/dma@fd540000: could not find phandle
[ 0.363941] /amba/dma@fd550000: could not find phandle
[ 0.369132] /amba/dma@fd560000: could not find phandle
[ 0.374317] /amba/dma@fd570000: could not find phandle
[ 0.379625] /amba/dma@ffa80000: could not find phandle
[ 0.384697] /amba/dma@ffa90000: could not find phandle
[ 0.389889] /amba/dma@ffaa0000: could not find phandle
[ 0.395077] /amba/dma@ffab0000: could not find phandle
[ 0.400272] /amba/dma@ffac0000: could not find phandle
[ 0.405459] /amba/dma@ffad0000: could not find phandle
[ 0.410651] /amba/dma@ffae0000: could not find phandle
[ 0.415840] /amba/dma@ffaf0000: could not find phandle
[ 0.421124] /amba/ethernet@ff0e0000: could not find phandle
[ 0.428927] /amba/spi@ff0f0000: could not find phandle
[ 0.432103] /amba/sdhci@ff160000: could not find phandle
[ 0.437227] /amba/sdhci@ff170000: could not find phandle
[ 0.442640] /amba/usb@fe200000: could not find phandle
[ 0.467039] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.536076] raid6: int64x1 gen() 409 MB/s
[ 0.604165] raid6: int64x1 xor() 432 MB/s
[ 0.672300] raid6: int64x2 gen() 617 MB/s
[ 0.740425] raid6: int64x2 xor() 555 MB/s
[ 0.808549] raid6: int64x4 gen() 907 MB/s
[ 0.876699] raid6: int64x4 xor() 685 MB/s
[ 0.944824] raid6: int64x8 gen() 1056 MB/s
[ 1.012954] raid6: int64x8 xor() 683 MB/s
[ 1.081060] raid6: neonx1 gen() 672 MB/s
[ 1.149185] raid6: neonx1 xor() 702 MB/s
[ 1.217308] raid6: neonx2 gen() 1044 MB/s
[ 1.285429] raid6: neonx2 xor() 925 MB/s
[ 1.353553] raid6: neonx4 gen() 1385 MB/s
[ 1.421680] raid6: neonx4 xor() 1079 MB/s
[ 1.489788] raid6: neonx8 gen() 1556 MB/s
[ 1.557921] raid6: neonx8 xor() 1131 MB/s
[ 1.557959] raid6: using algorithm neonx8 gen() 1556 MB/s
[ 1.562095] raid6: .... xor() 1131 MB/s, rmw enabled
[ 1.567115] raid6: using intx1 recovery algorithm
[ 1.572102] ACPI: Interpreter disabled.
[ 1.575793] xen:balloon: Initialising balloon driver
[ 1.581095] xen_balloon: Initialising balloon driver
[ 1.586511] SCSI subsystem initialized
[ 1.589786] usbcore: registered new interface driver usbfs
[ 1.595180] usbcore: registered new interface driver hub
[ 1.600536] usbcore: registered new device driver usb
[ 1.605689] media: Linux media interface: v0.10
[ 1.610221] Linux video capture interface: v2.00
[ 1.614892] pps_core: LinuxPPS API ver. 1 registered
[ 1.619881] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 1.629066] PTP clock support registered
[ 1.633072] EDAC MC: Ver: 3.0.0
[ 1.637484] dmi: Firmware registration failed.
[ 1.640780] FPGA manager framework
[ 1.644238] Advanced Linux Sound Architecture Driver Initialized.
[ 1.651754] clocksource: Switched to clocksource arch_sys_counter
[ 1.656580] VFS: Disk quotas dquot_6.6.0
[ 1.660496] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.667589] pnp: PnP ACPI: disabled
[ 1.677675] NET: Registered protocol family 2
[ 1.678071] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.683679] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 1.690302] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.696611] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.702559] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.709133] NET: Registered protocol family 1
[ 1.714098] RPC: Registered named UNIX socket transport module.
[ 1.719317] RPC: Registered udp transport module.
[ 1.724068] RPC: Registered tcp transport module.
[ 1.728824] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.735457] Trying to unpack rootfs image as initramfs...
[ 1.829214] Freeing initrd memory: 32064K (ffffffc008200000 -
ffffffc00a150000)
[ 1.831842] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 1.837389] audit: initializing netlink subsys (disabled)
[ 1.842787] audit: type=2000 audit(1.716:1): initialized
[ 1.849222] workingset: timestamp_bits=60 max_order=18 bucket_order=0
[ 1.855367] NFS: Registering the id_resolver key type
[ 1.859755] Key type id_resolver registered
[ 1.863948] Key type id_legacy registered
[ 1.868030] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.874796] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.890491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
247)
[ 1.892369] io scheduler noop registered
[ 1.896340] io scheduler deadline registered
[ 1.900675] io scheduler cfq registered (default)
[ 1.905914] nwl-pcie fd0e0000.pcie: Link is DOWN
[ 1.910115] PCI host bridge /amba/pcie@fd0e0000 ranges:
[ 1.915351] No bus range found for /amba/pcie@fd0e0000, using [bus 00-ff]
[ 1.922366] MEM 0xe0000000..0xefffffff -> 0xe0000000
[ 1.927553] MEM 0x600000000..0x7ffffffff -> 0x600000000
[ 1.933080] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
[ 1.939227] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.944760] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 1.951683] pci_bus 0000:00: root bus resource [mem 0x600000000-0x7ffffffff
pref]
(XEN) physdev.c:17:d0v0 PHYSDEVOP cmd=25: not implemented
(XEN) physdev.c:17:d0v0 PHYSDEVOP cmd=15: not implemented
[ 1.969420] pci 0000:00:00.0: Failed to add - passthrough or MSI/MSI-X might
fail!
[ 1.977127] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
[ 1.983420] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
[ 1.988985] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
[ 1.995839] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
[ 2.002835] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
[ 2.009841] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
[ 2.016840] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
[ 2.023846] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
[ 2.030856] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
[ 2.037865] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
[ 2.044871] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
[ 2.051878] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
[ 2.058878] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
[ 2.065893] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
[ 2.072894] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
[ 2.079901] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
[ 2.086912] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
[ 2.093913] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
[ 2.102033] xen:xen_evtchn: Event-channel device installed
[ 2.153189] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.155328] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 215, base_baud
= 6250000) is a xuartps
[ 2.164053] [drm] Initialized drm 1.1.0 20060810
[ 2.168098] Unable to detect cache hierarchy from DT for CPU 0
[ 2.178894] brd: module loaded
[ 2.182529] loop: module loaded
[ 2.182577] Invalid max_queues (4), will use default max: 1.
[ 2.186597] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps
0x3 impl platform mode
[ 2.194860] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp
fbs pio slum part ccc sds apst
[ 2.205933] scsi host0: ahci-ceva
[ 2.208250] scsi host1: ahci-ceva
[ 2.211373] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port
0x100 irq 212
[ 2.219333] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port
0x180 irq 212
[ 2.227508] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.234264] zynqmp-qspi ff0f0000.spi: rx bus width not found
[ 2.240356] m25p80 spi0.0: found n25q512a, expected m25p80
[ 2.245312] m25p80 spi0.0: n25q512a (131072 Kbytes)
[ 2.250055] 4 ofpart partitions found on MTD device spi0.0
[ 2.255569] Creating 4 MTD partitions on "spi0.0":
[ 2.260416] 0x000000000000-0x000001e00000 : "boot"
[ 2.265778] 0x000001e00000-0x000001e40000 : "bootenv"
[ 2.270946] 0x000001e40000-0x000004240000 : "kernel"
[ 2.275954] 0x000004240000-0x000008000000 : "spare"
[ 2.282358] libphy: Fixed MDIO Bus: probed
[ 2.284917] tun: Universal TUN/TAP device driver, 1.6
[ 2.289566] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 2.299396] CAN device driver interface
[ 2.300542] gpiod_set_value: invalid GPIO
[ 2.304151] libphy: MACB_mii_bus: probed
[ 2.311247] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at
0xff0e0000 irq 25 (00:0a:35:00:22:01)
[ 2.317621] TI DP83867 ff0e0000.etherne:0c: attached PHY driver [TI DP83867]
(mii_bus:phy_addr=ff0e0000.etherne:0c, irq=-1)
[ 2.329274] xen_netfront: Initialising Xen virtual ethernet driver
[ 2.335065] usbcore: registered new interface driver asix
[ 2.340460] usbcore: registered new interface driver ax88179_178a
[ 2.346595] usbcore: registered new interface driver cdc_ether
[ 2.352474] usbcore: registered new interface driver net1080
[ 2.358185] usbcore: registered new interface driver cdc_subset
[ 2.364152] usbcore: registered new interface driver zaurus
[ 2.369795] usbcore: registered new interface driver cdc_ncm
[ 2.377082] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.382051] ehci-pci: EHCI PCI platform driver
[ 2.386802] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.392085] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus
number 1
[ 2.400713] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version
0x100 quirks 0x00010010
[ 2.408562] xhci-hcd xhci-hcd.0.auto: irq 220, io mem 0xfe200000
[ 2.414782] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.421402] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.428660] usb usb1: Product: xHCI Host Controller
[ 2.433588] usb usb1: Manufacturer: Linux 4.6.0-xilinx xhci-hcd
[ 2.439552] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 2.444783] hub 1-0:1.0: USB hub found
[ 2.448405] hub 1-0:1.0: 1 port detected
[ 2.452393] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.457823] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus
number 2
[ 2.465551] usb usb2: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 2.473724] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.480476] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.487734] usb usb2: Product: xHCI Host Controller
[ 2.492663] usb usb2: Manufacturer: Linux 4.6.0-xilinx xhci-hcd
[ 2.498633] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 2.503830] hub 2-0:1.0: USB hub found
[ 2.507440] hub 2-0:1.0: 1 port detected
[ 2.511533] usbcore: registered new interface driver uas
[ 2.516782] usbcore: registered new interface driver usb-storage
[ 2.523153] mousedev: PS/2 mouse device common for all mice
[ 2.528935] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as
rtc0
[ 2.535707] i2c /dev entries driver
[ 2.541444] pca953x 0-0020: interrupt support not compiled in
[ 2.546795] pca953x 0-0021: interrupt support not compiled in
[ 2.550859] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 201
[ 2.557035] ata2: SATA link down (SStatus 0 SControl 330)
[ 2.562335] ata1: SATA link down (SStatus 0 SControl 330)
[ 2.568009] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 202
[ 2.574769] i2c i2c-0: Added multiplexed i2c bus 2
[ 2.579511] i2c i2c-0: Added multiplexed i2c bus 3
[ 2.584506] i2c i2c-0: Added multiplexed i2c bus 4
[ 2.588941] i2c i2c-0: Added multiplexed i2c bus 5
[ 2.593191] pca954x 0-0075: registered 4 multiplexed busses for I2C mux
pca9544
[ 2.600992] at24 6-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
[ 2.607297] i2c i2c-6: Failed to register i2c client 24c08 at 0x55 (-16)
[ 2.614037] i2c i2c-6: of_i2c: Failure registering
/amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@55
[ 2.623032] i2c i2c-6: Failed to register i2c client 24c08 at 0x56 (-16)
[ 2.629773] i2c i2c-6: of_i2c: Failure registering
/amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@56
[ 2.638775] i2c i2c-6: Failed to register i2c client 24c08 at 0x57 (-16)
[ 2.645517] i2c i2c-6: of_i2c: Failure registering
/amba/i2c@ff030000/i2cswitch@74/i2c@0/eeprom@57
[ 2.654520] i2c i2c-1: Added multiplexed i2c bus 6
[ 2.659789] i2c i2c-1: Added multiplexed i2c bus 7
[ 2.664473] i2c i2c-1: Added multiplexed i2c bus 8
[ 2.669330] i2c i2c-1: Added multiplexed i2c bus 9
[ 2.674164] i2c i2c-1: Added multiplexed i2c bus 10
[ 2.679045] i2c i2c-1: Added multiplexed i2c bus 11
[ 2.683945] i2c i2c-1: Added multiplexed i2c bus 12
[ 2.688875] i2c i2c-1: Added multiplexed i2c bus 13
[ 2.693617] pca954x 1-0074: registered 8 multiplexed busses for I2C switch
pca9548
[ 2.701443] i2c i2c-1: Added multiplexed i2c bus 14
[ 2.706331] i2c i2c-1: Added multiplexed i2c bus 15
[ 2.711290] i2c i2c-1: Added multiplexed i2c bus 16
[ 2.716428] i2c i2c-1: Added multiplexed i2c bus 17
[ 2.721284] i2c i2c-1: Added multiplexed i2c bus 18
[ 2.726075] i2c i2c-1: Added multiplexed i2c bus 19
[ 2.731025] i2c i2c-1: Added multiplexed i2c bus 20
[ 2.735935] i2c i2c-1: Added multiplexed i2c bus 21
[ 2.740674] pca954x 1-0075: registered 8 multiplexed busses for I2C switch
pca9548
[ 2.749935] ina2xx 2-0040: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.755025] ina2xx 2-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.761436] ina2xx 2-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.767820] ina2xx 2-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.774230] ina2xx 2-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.780623] ina2xx 2-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.787028] ina2xx 2-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.793432] ina2xx 2-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.799835] ina2xx 2-004a: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.806230] ina2xx 2-004b: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.812724] ina2xx 3-0040: power monitor ina226 (Rshunt = 2000 uOhm)
[ 2.819033] ina2xx 3-0041: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.825438] ina2xx 3-0042: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.831835] ina2xx 3-0043: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.838245] ina2xx 3-0044: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.844638] ina2xx 3-0045: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.851038] ina2xx 3-0046: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.857443] ina2xx 3-0047: power monitor ina226 (Rshunt = 5000 uOhm)
[ 2.893958] EDAC MC: ECC not enabled
[ 2.894244] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac
controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
[ 2.904297] sdhci: Secure Digital Host Controller Interface driver
[ 2.910419] sdhci: Copyright(c) Pierre Ossman
[ 2.914835] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.920704] sdhci-arasan ff160000.sdhci: "xlnx,mio_bank " property is
missing.
[ 2.927819] sdhci-arasan: probe of ff160000.sdhci failed with error -22
[ 2.971743] mmc0: SDHCI controller on ff170000.sdhci [ff170000.sdhci] using
ADMA 64-bit
[ 2.974342] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.980386] usbcore: registered new interface driver usbhid
[ 2.985864] usbhid: USB HID core driver
[ 3.006812] si570 8-005d: registered, current frequency 300000000 Hz
[ 3.031405] si570 9-005d: registered, current frequency 148500000 Hz
[ 3.032429] fpga_manager fpga0: Xilinx ZynqMp FPGA Manager registered
[ 3.039397] pktgen: Packet Generator for packet performance testing.
Version: 2.75
[ 3.046731] Initializing XFRM netlink socket
[ 3.050686] NET: Registered protocol family 10
[ 3.057639] sit: IPv6 over IPv4 tunneling driver
[ 3.060176] NET: Registered protocol family 17
[ 3.064309] NET: Registered protocol family 15
[ 3.068796] can: controller area network core (rev 20120528 abi 9)
[ 3.075050] NET: Registered protocol family 29
[ 3.079530] can: raw protocol (rev 20120528)
[ 3.083847] can: broadcast manager protocol (rev 20120528 t)
[ 3.089559] can: netlink gateway (rev 20130117) max_hops=1
[ 3.095259] 9pnet: Installing 9P2000 support
[ 3.099434] Key type dns_resolver registered
[ 3.106404] registered taskstats version 1
[ 3.108383] Btrfs loaded
[ 3.114762] rtc_zynqmp ffa60000.rtc: setting system clock to 1986-12-22
00:56:59 UTC (535597019)
[ 3.119456] ALSA device list:
[ 3.122346] No soundcards found.
[ 3.129359] Freeing unused kernel memory: 460K (ffffff8008b3f000 -
ffffff8008bb2000)
INIT: version 2.88 booting
[ 4.093690] random: dd urandom read with 7 bits of entropy available
Fri Dec 16 01:23:11 UTC 2016
Starting internet superserver: inetd.
INIT: Entering runlevel: 5
Configuring network interfaces... [ 4.193262] IPv6: ADDRCONF(NETDEV_UP):
eth0: link is not ready
udhcpc (v1.24.1) started
Sending discover...
[ 6.308058] macb ff0e0000.ethernet eth0: link up (1000/Full)
[ 6.308191] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sending discover...
Sending select for 10.0.0.191...
Lease of 10.0.0.191 obtained, lease time 604800
/etc/udhcpc.d/50default: Adding DNS 75.75.75.75
/etc/udhcpc.d/50default: Adding DNS 75.75.76.76
done.
Starting OpenBSD Secure Shell server: sshd
generating ssh RSA key...
generating ssh ECDSA key...
generating ssh DSA key...
generating ssh ED25519 key...
done.
Starting syslogd/klogd: done
Starting /usr/sbin/xenstored....
Setting domain 0 name, domid and JSON config...
libxl: error: libxl.c:689:libxl_domain_info: getting domain info list:
Permission denied
libxl: error: libxl_dom.c:1127:libxl__userdata_path: unable to find domain info
for domain 0: Permission denied
cannot store stub json config for domain 0
Starting xenconsoled...
Starting QEMU as disk backend for dom0
/etc/rc5.d/S80xencommons: line 102: /usr/bin/qemu-system-i386: No such file or
directory
Starting domain watchdog daemon: xenwatchdogd startup
PetaLinux 2016.4 plnx_aarch64 /dev/hvc0
plnx_aarch64 login: [ 50.558969] random: nonblocking pool is initialized
(XEN)
(XEN) TBM Jan 25 2017 12:45:38 running on xen-guest_irq_latency
(XEN) MIDR=410fd034
(XEN) D$ L1 32KB linesize=64b ways=4 sets=128
(XEN) I$ L1 32KB linesize=64b ways=2 sets=256
(XEN) D$ L2 1024KB linesize=64b ways=16 sets=1024
(XEN) I$ L2 1024KB linesize=64b ways=16 sets=1024
(XEN) plat_init_a64
(XEN) EL1 I and D caches enabled
(XEN) RDO: enable MMU
(XEN) RDO: Still here? EL1 S1 MMU is on
(XEN) CNTFRQ=99998999 Hz k=10
(XEN) latency (ns): max=10180 warm_max=0 min=10180 avg=10180
(XEN) latency (ns): max=10180 warm_max=0 min=8470 avg=9967
(XEN) latency (ns): max=10180 warm_max=8150 min=8150 avg=9740
(XEN) latency (ns): max=10180 warm_max=8150 min=8050 avg=9529
(XEN) latency (ns): max=10180 warm_max=8150 min=8050 avg=9357
(XEN) latency (ns): max=10180 warm_max=8150 min=8030 avg=9192
(XEN) latency (ns): max=10180 warm_max=8150 min=8030 avg=9058
(XEN) latency (ns): max=10180 warm_max=8150 min=8020 avg=8929
(XEN) latency (ns): max=10180 warm_max=8150 min=8020 avg=8832
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8708
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8617
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8552
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8491
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8440
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8395
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8346
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8304
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8270
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8252
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8215
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8196
(XEN) latency (ns): max=10180 warm_max=8150 min=7840 avg=8176
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8180
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8173
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8159
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8157
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8144
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8119
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8127
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8113
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8098
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8077
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8068
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8056
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8051
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8054
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8068
(XEN) latency (ns): max=10180 warm_max=8210 min=7840 avg=8061
(XEN) sched_smt_power_savings: disabled
(XEN) NOW=83505753225
(XEN) Online Cpus: 0-3
(XEN) Cpupool 0:
(XEN) Cpus: 0-3
(XEN) Scheduler: SMP Credit Scheduler rev2 (credit2)
(XEN) Active queues: 1
(XEN) default-weight = 256
(XEN) Runqueue 0:
(XEN) ncpus = 4
(XEN) cpus = 0-3
(XEN) max_weight = 256
(XEN) instload = 1
(XEN) aveload = 3208 (~1%)
(XEN) l(XEN) idlers: 00000000,00000000,00000000,0000000a
a(XEN) tickled: 00000000,00000000,00000000,00000000
t(XEN) fully idle cores: 00000000,00000000,00000000,0000000a
e(XEN) Domain info:
n(XEN) Domain: 0 w 256 v 4
c(XEN) 1: [0.0] flags=2 cpu=0 credit=10500000 [w=256] load=3170 (~1%)
(XEN) 2: y[0.1] flags=0 cpu=1 credit=10500000 [w=256]( load=131072 (~50%)
(XEN) 3: n[0.2] flags=0 cpu=2s credit=10500000 [w=256]) load=131072 (~50%):
(XEN) 4: [0.3] flags=0 cpu=3m credit=10500000 [w=256]a load=131072 (~50%)x
=(XEN) Domain: 1 w 256 v 1
1(XEN) 5: 1[1.0] flags=2 cpu=2 credit=9713074 [w=256] load=56 (~0%)
(XEN) Runqueue info:
6(XEN) runqueue 0:
9(XEN) CPUs info:
0(XEN) CPU[00] runq=0, sibling=00000000,00000000,00000000,00000001,
wcore=00000000,00000000,00000000,00000001
a(XEN) run: [0.0] flags=2 cpu=0 credit=10500000 [w=256] load=3170 (~1%)
(XEN) CPU[01] r runq=0, sibling=00000000,00000000,00000000,00000002,
mcore=00000000,00000000,00000000,00000002
(XEN) CPU[02] _ runq=0, sibling=00000000,00000000,00000000,00000004,
mcore=00000000,00000000,00000000,00000004
(XEN) run: [1.0] flags=2 cpu=2 credit=2915518 [w=256] load=56 (~0%)
(XEN) CPU[03] a runq=0, sibling=00000000,00000000,00000000,00000008,
xcore=00000000,00000000,00000000,00000008
=11690 min=7840 avg=8514
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8494
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8444
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8401
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8346
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8664
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8565
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8497
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8432
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8388
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8349
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8305
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8280
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8237
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8203
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8197
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8187
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8154
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8150
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8144
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8136
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8111
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8109
(XEN) latency (ns): max=11690 warm_max=11690 min=7840 avg=8116
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
