Hi Bertrand, Thanks for your response!
I builded the guest image on yocto kirkstone source which has FSTYPE ext3. Guest image generated is xen-guest-image-minimal-raspberrypi4-64.ext3. Below is the content of guest.cfg file * kernel = "/home/root/Image" * * cmdline = "console=hvc0 earlyprintk=xen sync_console root=/dev/xvda" * * memory = "256" * * name = "guest1" * * vcpus = 1 * * serial="pty" * * disk = [ 'phy:/dev/loop0,xvda,w' ] * * vif=[ 'mac=00:11:22:66:88:22,bridge=xenbr0,type=netfront', ]* I am trying to mount xen-guest-image-minimal-raspberrypi4-64.ext3 to a virtual device & then will run the guest VM by command "xl create -c guest.cfg". But facing issue while trying to mount. Regards, Vipul Kumar On Wed, Aug 24, 2022 at 8:06 PM Bertrand Marquis <bertrand.marq...@arm.com> wrote: > Hi Vipul, > > > On 24 Aug 2022, at 15:16, Vipul Suneja <vsunej...@gmail.com> wrote: > > > > Hi, > > > > I am porting xen hypervisor on rpi4 with yocto kirkstone sources. > Followed the basic steps to build xen-image-minimal & > xen-guest-image-minimal. I could flash sd card with xen minimal image & > could see dom0 up. I copied "Image", "xen-guest-image-minimal" .ext3 file & > guest.cfg to "/home/root". After that created a bridge with below step: > > > > killall -SIGUSR2 udhcpc > > brctl addbr xenbr0 > > brctl addif xenbr0 eth0 > > killall udhcpc > > udhcpc -R -b -p /var/run/udhcpc.xenbr0.pid -i xenbr0 > > > > Could see the xenbr0 interface up. > > After that while mounting the guest file system it shows no such file or > directory but the file is already there. > > > > [23:40:15] <Guest9046> root@raspberrypi4-64:~# ls -l > > [23:40:15] <Guest9046> -rw-r--r-- 1 root root 24652288 Mar > 9 12:36 Image > > [23:40:15] <Guest9046> -rw-r--r-- 1 root root 247 Mar > 9 12:37 guest1.cfg > > [23:40:15] <Guest9046> -rw-r--r-- 1 root root 868220928 Mar > 9 12:39 xen-guest-image-minimal-raspberrypi4-64.ext3 > > [23:40:15] <Guest9046> root@raspberrypi4-64:~# chmod 0777 > xen-guest-image-minimal-raspberrypi4-64.ext3 > > [23:40:15] <Guest9046> root@raspberrypi4-64:~# ls -l > > [23:40:15] <Guest9046> -rw-r--r-- 1 root root 24652288 Mar > 9 12:36 Image > > [23:40:15] <Guest9046> -rw-r--r-- 1 root root 247 Mar > 9 12:37 guest1.cfg > > [23:40:15] <Guest9046> -rwxrwxrwx 1 root root 868220928 Mar > 9 12:39 xen-guest-image-minimal-raspberrypi4-64.ext3 > > [23:40:15] <Guest9046> root@raspberrypi4-64:~# losetup /dev/loop0 > xen-guest-image-minimal-raspberrypi4-64.ext3 > > [23:40:15] <Guest9046> losetup: > xen-guest-image-minimal-raspberrypi4-64.ext3: No such file or directory > > [23:40:15] <Guest9046> root@raspberrypi4-64:~# losetup /dev/loop0 > /home/root/xen-guest-image-minimal-raspberrypi4-64.ext3 > > [23:40:15] <Guest9046> losetup: > /home/root/xen-guest-image-minimal-raspberrypi4-64.ext3: No such file or > directory > > [23:40:15] <Guest9046> root@raspberrypi4-64:~# > > [23:40:15] <Guest9046> root@raspberrypi4-64:~# > > [23:40:15] <Guest9046> root@raspberrypi4-64:~# > > [23:40:15] <Guest9046> root@raspberrypi4-64:~# losetup /dev/loop0 > /home/root/xen-guest-image-minimal-raspberrypi4-64.ext3 > > [23:40:15] <Guest9046> losetup: > /home/root/xen-guest-image-minimal-raspberrypi4-64.ext3: No such file or > directory > > Why do you want to mount the file system ? > > Anyway this is not related to Xen, I guess you could start without xen and > still not manage to mount the file like that (linux configuration issue ?) > > What is the content of you guest.cfg > How do you want to pass the guest root file system ? > > Yocto should actually generate an img file and you could use it by having > something like this in your guest.cfg: > disk=["file:/home/root/guest1.img,xvda,w”] > > Cheers > Bertrand > > > > > Any input on this issue will be really helpful, expecting your response. > > > > Thanks & Regards, > > Vipul Kumar > >
