flight 181035 xen-unstable-smoke real [real]
http://logs.test-lab.xenproject.org/osstest/logs/181035/
Regressions :-(
Tests which did not succeed and are blocking,
including tests which could not be run:
build-amd64 6 xen-build fail REGR. vs. 181018
build-arm64-xsm 6 xen-build fail REGR. vs. 181018
build-armhf 6 xen-build fail REGR. vs. 181018
Tests which did not succeed, but are not blocking:
build-amd64-libvirt 1 build-check(1) blocked n/a
test-amd64-amd64-libvirt 1 build-check(1) blocked n/a
test-amd64-amd64-xl-qemuu-debianhvm-amd64 1 build-check(1) blocked n/a
test-arm64-arm64-xl-xsm 1 build-check(1) blocked n/a
test-armhf-armhf-xl 1 build-check(1) blocked n/a
version targeted for testing:
xen 465217b0f872602b4084a1b0fa2ef75377cb3589
baseline version:
xen 94200e1bae07e725cc07238c11569c5cab7befb7
Last test of basis 181018 2023-05-30 20:00:24 Z 0 days
Testing same since 181031 2023-05-31 11:00:27 Z 0 days 2 attempts
------------------------------------------------------------
People who touched revisions under test:
Bobby Eshleman <bobbyeshle...@gmail.com>
Jan Beulich <jbeul...@suse.com>
Juergen Gross <jgr...@suse.com>
Oleksii Kurochko <oleksii.kuroc...@gmail.com>
Stefano Stabellini <sstabell...@kernel.org>
jobs:
build-arm64-xsm fail
build-amd64 fail
build-armhf fail
build-amd64-libvirt blocked
test-armhf-armhf-xl blocked
test-arm64-arm64-xl-xsm blocked
test-amd64-amd64-xl-qemuu-debianhvm-amd64 blocked
test-amd64-amd64-libvirt blocked
------------------------------------------------------------
sg-report-flight on osstest.test-lab.xenproject.org
logs: /home/logs/logs
images: /home/logs/images
Logs, config files, etc. are available at
http://logs.test-lab.xenproject.org/osstest/logs
Explanation of these reports, and of osstest in general, is at
http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master
http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master
Test harness code can be found at
http://xenbits.xen.org/gitweb?p=osstest.git;a=summary
Not pushing.
------------------------------------------------------------
commit 465217b0f872602b4084a1b0fa2ef75377cb3589
Author: Jan Beulich <jbeul...@suse.com>
Date: Wed May 31 12:01:11 2023 +0200
vPCI: account for hidden devices
Hidden devices (e.g. an add-in PCI serial card used for Xen's serial
console) are associated with DomXEN, not Dom0. This means that while
looking for overlapping BARs such devices cannot be found on Dom0's list
of devices; DomXEN's list also needs to be scanned.
Suppress vPCI init altogether for r/o devices (which constitute a subset
of hidden ones).
Signed-off-by: Jan Beulich <jbeul...@suse.com>
Reviewed-by: Roger Pau Monné <roger....@citrix.com>
Tested-by: Stefano Stabellini <sstabell...@kernel.org>
commit 445fdc641e304ff41a544f8f5926a13b604c08ad
Author: Juergen Gross <jgr...@suse.com>
Date: Wed May 31 12:00:40 2023 +0200
xen/include/public: fix 9pfs xenstore path description
In xen/include/public/io/9pfs.h the name of the Xenstore backend node
"security-model" should be "security_model", as this is how the Xen
tools are creating it and qemu is reading it.
Fixes: ad58142e73a9 ("xen/public: move xenstore related doc into 9pfs.h")
Fixes: cf1d2d22fdfd ("docs/misc: Xen transport for 9pfs")
Signed-off-by: Juergen Gross <jgr...@suse.com>
Reviewed-by: Jason Andryuk <jandr...@gmail.com>
Acked-by: Stefano Stabellini <sstabell...@kernel.org>
commit 0f80a46ffa6bfd5d111fc2e64ee5983513627e4d
Author: Oleksii Kurochko <oleksii.kuroc...@gmail.com>
Date: Wed May 31 12:00:13 2023 +0200
xen/riscv: remove dummy_bss variable
After introduction of initial pagetables there is no any sense
in dummy_bss variable as bss section will not be empty anymore.
Signed-off-by: Oleksii Kurochko <oleksii.kuroc...@gmail.com>
Acked-by: Bobby Eshleman <bobbyeshle...@gmail.com>
commit 0d74fc2b2f85586ceb5672aedc79c666e529381d
Author: Oleksii Kurochko <oleksii.kuroc...@gmail.com>
Date: Wed May 31 12:00:05 2023 +0200
xen/riscv: setup initial pagetables
The patch does two thing:
1. Setup initial pagetables.
2. Enable MMU which end up with code in
cont_after_mmu_is_enabled()
Signed-off-by: Oleksii Kurochko <oleksii.kuroc...@gmail.com>
Acked-by: Bobby Eshleman <bobbyeshle...@gmail.com>
commit ec337ce2e972b70619f5a076b20910a2ff4fea7a
Author: Oleksii Kurochko <oleksii.kuroc...@gmail.com>
Date: Wed May 31 11:59:53 2023 +0200
xen/riscv: align __bss_start
bss clear cycle requires proper alignment of __bss_start.
ALIGN(PAGE_SIZE) before "*(.bss.page_aligned)" in xen.lds.S
was removed as any contribution to "*(.bss.page_aligned)" have to
specify proper aligntment themselves.
Fixes: cfa0409f7cbb ("xen/riscv: initialize .bss section")
Signed-off-by: Oleksii Kurochko <oleksii.kuroc...@gmail.com>
Reviewed-by: Jan Beulich <jbeul...@suse.com>
Acked-by: Bobby Eshleman <bobbyeshle...@gmail.com>
commit e66003e7be1996c9dd8daca54ba34ad5bb58d668
Author: Oleksii Kurochko <oleksii.kuroc...@gmail.com>
Date: Wed May 31 11:55:58 2023 +0200
xen/riscv: introduce setup_initial_pages
The idea was taken from xvisor but the following changes
were done:
* Use only a minimal part of the code enough to enable MMU
* rename {_}setup_initial_pagetables functions
* add an argument for setup_initial_mapping to have
an opportunity to make set PTE flags.
* update setup_initial_pagetables function to map sections
with correct PTE flags.
* Rewrite enable_mmu() to C.
* map linker addresses range to load addresses range without
1:1 mapping. It will be 1:1 only in case when
load_start_addr is equal to linker_start_addr.
* add safety checks such as:
* Xen size is less than page size
* linker addresses range doesn't overlap load addresses
range
* Rework macros {THIRD,SECOND,FIRST,ZEROETH}_{SHIFT,MASK}
* change PTE_LEAF_DEFAULT to RW instead of RWX.
* Remove phys_offset as it is not used now
* Remove alignment of {map, pa}_start &= XEN_PT_LEVEL_MAP_MASK(0);
in setup_inital_mapping() as they should be already aligned.
Make a check that {map_pa}_start are aligned.
* Remove clear_pagetables() as initial pagetables will be
zeroed during bss initialization
* Remove __attribute__((section(".entry")) for setup_initial_pagetables()
as there is no such section in xen.lds.S
* Update the argument of pte_is_valid() to "const pte_t *p"
* Add check that Xen's load address is aligned at 4k boundary
* Refactor setup_initial_pagetables() so it is mapping linker
address range to load address range. After setup needed
permissions for specific section ( such as .text, .rodata, etc )
otherwise RW permission will be set by default.
* Add function to check that requested SATP_MODE is supported
Origin: g...@github.com:xvisor/xvisor.git 9be2fdd7
Signed-off-by: Oleksii Kurochko <oleksii.kuroc...@gmail.com>
Reviewed-by: Jan Beulich <jbeul...@suse.com>
Acked-by: Bobby Eshleman <bobbyeshle...@gmail.com>
commit efadb18dd58abaa0c6102e04f1c25ac94c273853
Author: Oleksii Kurochko <oleksii.kuroc...@gmail.com>
Date: Wed May 31 11:55:46 2023 +0200
xen/riscv: add VM space layout
Also it was added explanation about ignoring of top VA bits
Signed-off-by: Oleksii Kurochko <oleksii.kuroc...@gmail.com>
Acked-by: Bobby Eshleman <bobbyeshle...@gmail.com>
(qemu changes not included)
