Greetings,
I try to run Xen on low energy platforms. I've previously been here
about an Intal Atom which died
just after the 3 year warranty expired. So I'm trying AMD's laptop
Ryzen. I think I've been using Xen
for 8 years.
I have Debian (Linux snuc 4.19.0-13-amd64 #1 SMP Debian 4.19.160-2
(2020-11-28) x86_64 GNU/Linux)
running on a new SimplyNuC: Aspen PN50 R7 4800U with a AMD Ryzen™ 4000
Renoir mobile processor.
(I tried to run Xen from the factory installed Ubuntu and ran into the
same problem below, so I
thought I ought to use Debian in case Ubuntu had a shortcoming re: lvm)
I created volumes with lvm, i.e. /dev/vg0/aresboot, /dev/vg0/aresswap,
/dev/vg0/aresserver
which are to be exposed to the Gentoo environment as sda1, sda2, and
sda3. My Gentoo
/etc/fstab accordingly has sda1,2, & 3 specified. My problem occurs, I
think, before my Gentoo
kernel even has a chance to perform its initialization.
I am trying to create a Gentoo VM and successfully built a kernel and
initramfs in a chrooted
environment within /dev/vg0/aresserver. I've successfully done this
before on
other platforms; however, my attempt now is on this tiny, but powerful
and efficient, SimplyNUC.
And, I think this may be my first time using LVM partitions exclusively
rather than standard fsdisk partitions.
When I try to "xl create ares.conf -c", the Gentoo kernel is unable to
see the labeled "sda3"
[target is Debian's /dev/vg0/aresserver].
I'm not new Xen and have not had this kind of problem before, but I also
don't think I staged
my guests completely on lvm partitions. I'm thinking there is a problem
between the
Xen Kernel code and Gentoo's kernel and I think the problem may be on
the Gentoo side.
The version of lvm on Debian is: 2.03.02(2)
The version of lvm [lvm2] on Gentoo is: 2.02.187-r2
(Would a lvm 2.02 be unable to read a 2.03??)
My question now is: when my Gentoo initramfs can't find the partition
and I enter its shell, should I
be seeing the exposed partition, e.g. "sda3", under /dev? I think so.
None of the names I specify, e.g. "sda3", appear under the /dev listing
(see pastebin below).
A sample configuration for the disk (just 1 target used to debug this
problem) is:
disk = ['format=raw, vdev=sda3, access=rw,
target=/dev/mapper/vg0-aresserver']
I have tried specifying root as "sda3" -- the name that the target
should appear as in the guest
environment as well as the full path from the Dom0 environment (above).
I'm guessing my problem is an initramfs and/or kernel issue in Gentoo:
being unable to
read an lvm partition. Note, when I compiled, I used genkernel as follows:
genkernel --menuconfig --lvm --mdadm all
and my xen configuration has:
root=/dev/vg0/aresserver dolvm domdadm
(root=/dev/sda3 and root=sda3 do not work either)
Before I approach Gentoo developers, I wanted to learn from the Xen
gurus that my assumption that the
initramfs /dev listing is the correct assay to determine if initramfs
and/or the kernel are
able to see the Debian lvm partitions.
Here is a pastebin of my create session and listing of /dev from within
initramfs shell: https://pastebin.com/juybx5gU
So, should I be seeing "sda3" when I list /dev?
Thank you.
--
Email Rider
John Laurence Poole
