Hi,

I'm running a Solaris xVM using release 75a on a Sun X4600 with 8 AMD 
dual core cpus, 32 GB RAM

I created a Solaris PV domain with the parameter --vcpus=4 and the 
installation was very fast and works fine.  If I run xm list, I can see 
that my PV domain has 4 VCPUs.
#xm list
Name                                      ID   Mem VCPUs      State   
Time(s)
Domain-0                                   0 11284    16     r-----  15870.0
solarisPV                                        1     4              9305.9

However, if I try to create a HVM domain with parameter --vcpus=4 the 
installation is really slow.  The OS boots, I can select that it is a 
Solaris Express Installation and that is an interactive one.  It checks 
the devices, but the systems hangs at the point where it says 
"Extracting Windowing system" just before prompting for the vncviewer 
password.  After half and hour of wait, there is no progress.  Here is 
the command I'm running:

virt-install -n solarisHVM --hvm --vnc -r 10240 -f 
/xvm/solarisHVM/root.img -s 16  -c /iso/sol-os-platform-dvd.iso --vcpus=4

I run truss against the virt-install process and it is sleeping.  prstat 
-mL shows not activity, all processes sleeping, no I/O activity is 
reported by iostat.


If I run in another window xm list, I can see that my HVM domain has 4 
Virtual CPUs, however, the system is hanging there, no progress.

If I run the same command but without the --vcpus=4,  I pass the 
"Extracting Windowing System" message within 30 seconds.  I get the 
vncviewer connection working and can setup the OS.  After 15 minutes the 
installation is complete.  During the installation prstat -mL shows 
qemu-dm on top of the list with CPU utilization greater than 25%, I can 
see alot of activity from iostat while files are installed.

I do not understand, with 1 VPU installation finishes within 15 minutes, 
while with 4 VCPUs the installation does not pass the Extracting 
Windowing system after 30 minutes.

Has anybody have similar issues, any hints on how to make it work faster 
?  Am I missing other parameters ?

How can I configure 4 VPUS for an HVM domain such that when I run 
psrinfo within the domain I see 4 CPUs ??

Tips, best practices are appreciated.


Thanks,

-- 
+-----------------------------------------------+
        Jairo Cardozo H
        Benchmark Engineer
        Sun  Solution Centers
                
        [EMAIL PROTECTED]
        Ext:   87013    
        Phone:  650-786-7013
+-----------------------------------------------+

_______________________________________________
xen-discuss mailing list
[email protected]

Reply via email to