Jurgen, I tried just now and was unable to reproduce weekend's situation. SNV90 obtained IP in a couple of seconds on box with RTL8110SC I must notice , that one thing has changed in hardware config of the box. On Saturday i had 3 NICs on the box: RTL8110SC integrated on the board, RTL8139 and RTL8169 plugged into PCI slots. Installer asked me which one of interfaces to configure and i pointed to rge0 ( be sure it's native adapter with network cable) Now i understood that rge0 was RTL8169 plugged into a slot and cable was plugged into rge1 . Right now when two PCI cards have been pulled out . On my main box interface is rge1. So, driver rge should be OK and i have to try create DomU per David's request
--- On Tue, 6/24/08, Juergen Keil <[EMAIL PROTECTED]> wrote:
From: Juergen Keil <[EMAIL PROTECTED]>
Subject: Re: [xen-discuss] Bug 6703227
To: [EMAIL PROTECTED]
Date: Tuesday, June 24, 2008, 12:07 PM
> Is that DHCP failure with the SNV90 media reproducable?
>
>
> If yes: can you try to get a "tcpdump -x -vv -s 0" on the
> other box, while the SNV90 installer tries to configure the
> rge0 network interface on metal with DHCP?
>
> ***************************************************
> Yes, i can do it tomorrow
> morning. This phase shouldn't touch
> anything on hard drive (?)
> If i am wrong about that .....
> ***************************************************
Shouldn't touch the hdd. This is before you select what packages
should be installed, and before you select the target hdd for
installation.
log.raw.gz
Description: GNU Zip compressed data
_______________________________________________ xen-discuss mailing list [email protected]
