Brian Banister wrote:
> On Sun, Nov 02, 2008 at 10:24:31AM -0500, Mark Johnson wrote:
> Mark,
>
> Your advice solved the problem. Now I'm hoping you can give a bit of
> insight into why it did. I had already copied the amd64/cadp160 driver
> over to the i86xpv side, but had not copied the 32-bit driver (not
> needed) or the cadp160.conf file. In the absence of the .conf file,
> the scsi system still came up and partially worked (I could talk to
> the scsi changer and see hard drives), so I _assumed_ that it must be
> finding the .conf from the i86pc side.
/kernel is the common directory between i86pc
and i86xpv. the /platform/i86pc directory will not
be looked at when booting into i86xpv.
> Can you suggest why st didn't work but other things did?
It the conf file, but not exactly sure why.. You could
try removing these one at a time and see which property it
is if your interested.. I would guess tape="sctp".
flow_control="dmult" queue="qsort" disk="scdk" tape="sctp"
MRJ
_______________________________________________
xen-discuss mailing list
[email protected]
