On Thu, Feb 5, 2009 at 7:11 PM, Mark Johnson <[email protected]> wrote: > Fajar A. Nugraha wrote: >> I'm testing it on opensolaris snv_98 since all versions after that >> (including snv_106) refused to boot xen kernel on HP box with smart >> array and qlogic card (normal kernel works fine with >> disable-qlc=true). Filed a bug on >> http://defect.opensolaris.org/bz/show_bug.cgi?id=5905 but no takers so >> far (guess it might be HW-specific issue). > > You have a driver for the HP smart array (since it > boots in metal)?
Yes. > If so, where is it installed to? I added CPQary3 driver to x86.microroot from the install CD, and rebuild the install CD afterwards. Opensolaris is installed on internal disk. On a side note, I just acquired another similar HP system but WITHOUT qlogic card. And guess what, xen kernel works perfectly! Somehow qlogic driver is causing problems on my system. On non-xen kernel using disable-qlc=true allows it to boot (I'm not using any external drive on this server). On xen kernel this workaround is not enough. Here's lspci output from Linux of the problematic qlogic card. 10:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 02) 10:00.1 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 02) Regards, Fajar _______________________________________________ xen-discuss mailing list [email protected]
