Hi,

I found out that "http://xenbits.xensource.com/ext/ppc/xen-unstable.hg";
tree builds and works fine for me. What I described in my last post was for
"http://xenbits.xensource.com/xen-unstable.hg"; tree.

But there is still another thing that does not work for me. I've build the
hypervisor, the kernel and the tools. I can boot into the hypervisor (using
yaboot), the hypervisor is able to load the kernel. Xend executes with some
errors:

ioctl32(blktapctrl:3415): Unknown cmd fd(4) cmd(00000003){00} arg(00000003)
on /dev/xen/blktap0
ioctl32(blktapctrl:3415): Unknown cmd fd(4) cmd(00000004){00} arg(00000d57)
on /dev/xen/blktap0

The main problem is to create a domU. It fails with the error that cannot
open "/proc/xen/balloon". The balloon driver is disabled for ppc in the xen
linux kernel. So how can I prevent the tools or xend of using the balloon
driver??

Mit freundlichen Grüßen / Best Regards
Christian Kaiser
--
IBM Deutschland Entwicklung GmbH
Open Systems Firmware Development
mail: [EMAIL PROTECTED]

IBM Deutschland Entwicklung GmbH
Vorsitzender des Aufsichtsrats: Martin Jetter
Geschäftsführung: Herbert Kircher
Sitz der Gesellschaft: Böblingen
Registergericht: Amtsgericht Stuttgart, HRB 243294

[EMAIL PROTECTED] wrote on 09/24/2007 04:03:01 PM:

>
> Hi all,
>
> I tried to build xen on a JS21 blade today but some hints at the build
page
> (http://wiki.xensource.com/xenwiki/XenPPC/Build) are confusing me.
>
> The wiki says clone this:
> "http://xenbits.xensource.com/ext/ppc/xen-unstable.hg";
> But later it is two times mentioning the "xenppc-unstable" tree.
>
> So was there a switch from "xenppc-unstable" to "xen-unstable"??
> Which repository should be used to build the hypervisor?
>
> The "xen-unstable" tree cannot be build on my machine. I get the
following
> error:
>
> gcc -O2 -fomit-frame-pointer -DELFSIZE=64 -DNDEBUG -fno-strict-aliasing
> -std=gnu99 -Wall -Wstrict-prototypes -Wno-unused-value
> -Wdeclaration-after-statement -m64 -ffreestanding -fno-builtin
-fno-common
> -iwithprefix include -Werror -pipe
-I/root/xen/xen-unstable.hg/xen/include
> -I/root/xen/xen-unstable.hg/xen/include/asm-powerpc/mach-generic
> -I/root/xen/xen-unstable.hg/xen/include/asm-powerpc/mach-default
> -Wredundant-decls -Wpacked -msoft-float -O2 -g -D__XEN__ -c domain.c -o
> domain.o
> cc1: warnings being treated as errors
> In file included from domain.c:22:
> /root/xen/xen-unstable.hg/xen/include/xen/hypercall.h:117: warning:
> redundant redeclaration of ‘do_xsm_op’
> /root/xen/xen-unstable.hg/xen/include/xsm/xsm.h:24: warning: previous
> declaration of ‘do_xsm_op’ was here
> make[3]: *** [domain.o] Error 1
> make[3]: Leaving directory `/root/xen/xen-unstable.hg/xen/common'
> make[2]: *** [/root/xen/xen-unstable.hg/xen/common/built_in.o] Error 2
> make[2]: Leaving directory `/root/xen/xen-unstable.hg/xen/arch/powerpc'
> make[1]: *** [/root/xen/xen-unstable.hg/xen/xen] Error 2
> make[1]: Leaving directory `/root/xen/xen-unstable.hg/xen'
> make: *** [build] Error 2
> make: Leaving directory `/root/xen/xen-unstable.hg/xen'
>
> After omitting "-Werror" in "xen/arch/powerpc/Rules.mk" I get this error:
>
> gcc -O2 -fomit-frame-pointer -DELFSIZE=64 -DNDEBUG -fno-strict-aliasing
> -std=gnu99 -Wall -Wstrict-prototypes -Wno-unused-value
> -Wdeclaration-after-statement -m64 -ffreestanding -fno-builtin
-fno-common
> -iwithprefix include -pipe -I/root/xen/xen-unstable.hg/xen/include
> -I/root/xen/xen-unstable.hg/xen/include/asm-powerpc/mach-generic
> -I/root/xen/xen-unstable.hg/xen/include/asm-powerpc/mach-default
> -Wredundant-decls -Wpacked -msoft-float -O2 -g -D__XEN__ -Wundef
> -Wmissing-prototypes -Wmissing-declarations -Wshadow -nodefaultlibs
> -nostartfiles -Wl,--omagic -Wl,-T,xen.lds start.o
> /root/xen/xen-unstable.hg/xen/common/built_in.o
> /root/xen/xen-unstable.hg/xen/drivers/built_in.o
> /root/xen/xen-unstable.hg/xen/xsm/built_in.o
> /root/xen/xen-unstable.hg/xen/arch/powerpc/built_in.o
> /root/xen/xen-unstable.hg/xen/common/symbols-dummy.o -o .xen-syms
> /root/xen/xen-unstable.hg/xen/arch/powerpc/built_in.o: In function
> `do_physdev_op':
> ../x86/physdev.c:94: undefined reference to `xsm_apic'
> ../x86/physdev.c:77: undefined reference to `xsm_apic'
> ../x86/physdev.c:112: undefined reference to `xsm_assign_vector'
> /root/xen/xen-unstable.hg/xen/arch/powerpc/built_in.o: In function
> `__start_xen':
> /root/xen/xen-unstable.hg/xen/arch/powerpc/setup.c:353: undefined
reference
> to `acm_init'
> /root/xen/xen-unstable.hg/xen/arch/powerpc/built_in.o: In function
> `__hypercall_table':
> (.data+0x2e1278): undefined reference to `do_acm_op'
> collect2: ld returned 1 exit status
> make[2]: *** [.xen-syms] Error 1
> make[2]: Leaving directory `/root/xen/xen-unstable.hg/xen/arch/powerpc'
> make[1]: *** [/root/xen/xen-unstable.hg/xen/xen] Error 2
> make[1]: Leaving directory `/root/xen/xen-unstable.hg/xen'
> make: *** [build] Error 2
> make: Leaving directory `/root/xen/xen-unstable.hg/xen'
>
> I tried to play around with ACM and XSM but couldn't solve the problem.
Can
> someone help me on this?
>
> Mit freundlichen Grüßen / Best Regards
> Christian Kaiser
> --
> IBM Deutschland Entwicklung GmbH
> Open Systems Firmware Development
> mail: [EMAIL PROTECTED]
>
> IBM Deutschland Entwicklung GmbH
> Vorsitzender des Aufsichtsrats: Martin Jetter
> Geschäftsführung: Herbert Kircher
> Sitz der Gesellschaft: Böblingen
> Registergericht: Amtsgericht Stuttgart, HRB
> 243294_______________________________________________
> Xen-ppc-devel mailing list
> Xen-ppc-devel@lists.xensource.com
> http://lists.xensource.com/xen-ppc-devel
_______________________________________________
Xen-ppc-devel mailing list
Xen-ppc-devel@lists.xensource.com
http://lists.xensource.com/xen-ppc-devel

Reply via email to