linux-raspi2 (4.4.0-1055.62) xenial; urgency=low

  * linux-raspi2: 4.4.0-1055.62 -proposed tracker (LP: #1686648)

  [ Ubuntu: 4.4.0-78.99 ]

  * linux: 4.4.0-78.99 -proposed tracker (LP: #1686645)
  * Please backport fix to reference leak in cgroup blkio throttle
    (LP: #1683976)
    - block: fix module reference leak on put_disk() call for cgroups throttle
  * UbuntuKVM guest crashed while running I/O stress test with Ubuntu kernel
    4.4.0-47-generic (LP: #1659111)
    - block: Unhash block device inodes on gendisk destruction
    - block: Use pointer to backing_dev_info from request_queue
    - block: Dynamically allocate and refcount backing_dev_info
    - block: Make blk_get_backing_dev_info() safe without open bdev
    - block: Get rid of blk_get_backing_dev_info()
    - block: Move bdev_unhash_inode() after invalidate_partition()
    - block: Unhash also block device inode for the whole device
    - block: Revalidate i_bdev reference in bd_aquire()
    - block: Initialize bd_bdi on inode initialization
    - block: Move bdi_unregister() to del_gendisk()
    - block: Allow bdi re-registration
    - bdi: Fix use-after-free in wb_congested_put()
    - block: Make del_gendisk() safer for disks without queues
    - block: Fix bdi assignment to bdev inode when racing with disk delete
    - bdi: Mark congested->bdi as internal
    - bdi: Make wb->bdi a proper reference
    - bdi: Unify bdi->wb_list handling for root wb_writeback
    - bdi: Shutdown writeback on all cgwbs in cgwb_bdi_destroy()
    - bdi: Do not wait for cgwbs release in bdi_unregister()
    - bdi: Rename cgwb_bdi_destroy() to cgwb_bdi_unregister()
    - block: Fix oops in locked_inode_to_wb_and_lock_list()
    - kobject: Export kobject_get_unless_zero()
    - block: Fix oops scsi_disk_get()
  * Touchpad not working correctly after kernel upgrade (LP: #1662589)
    - Input: ALPS - fix V8+ protocol handling (73 03 28)
  * Xenial update to v4.4.62 stable release (LP: #1683728)
    - drm/i915: Avoid tweaking evaluation thresholds on Baytrail v3
    - drm/i915: Stop using RP_DOWN_EI on Baytrail
    - usb: dwc3: gadget: delay unmap of bounced requests
    - mtd: bcm47xxpart: fix parsing first block after aligned TRX
    - MIPS: Introduce irq_stack
    - MIPS: Stack unwinding while on IRQ stack
    - MIPS: Only change $28 to thread_info if coming from user mode
    - MIPS: Switch to the irq_stack in interrupts
    - MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
    - crypto: caam - fix RNG deinstantiation error checking
    - Linux 4.4.62
  * ifup service of network device stay active after driver stop (LP: #1672144)
    - net: use net->count to check whether a netns is alive or not
  * [Hyper-V] mkfs regression in kernel 4.4+ (LP: #1682215)
    - block: relax check on sg gap
  * [Feature] KBL: intel_powerclamp driver support (LP: #1591641)
    - thermal/powerclamp: remove cpu whitelist
    - thermal/powerclamp: correct cpu support check
    - thermal/powerclamp: add back module device table
  * sysfs channel reads of lps22hb pressure sensor are stale (LP: #1682103)
    - iio: st_pressure: initialize lps22hb bootime
  * Backlight control does not work and there are no entries in
    /sys/class/backlight (LP: #1667323)
    - Revert "ACPI / video: Add force_native quirk for HP Pavilion dv6"
  * [Feature] KBL: intel_rapl driver support (LP: #1591640)
    - powercap/intel_rapl: Add support for Kabylake
  * Xenial update to v4.4.61 stable release (LP: #1682140)
    - drm/vmwgfx: Type-check lookups of fence objects
    - drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
    - drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
    - drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
    - drm/vmwgfx: Remove getparam error message
    - drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
    - sysfs: be careful of error returns from ops->show()
    - staging: android: ashmem: lseek failed due to no FMODE_LSEEK.
    - arm/arm64: KVM: Take mmap_sem in stage2_unmap_vm
    - arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region
    - iio: bmg160: reset chip when probing
    - Reset TreeId to zero on SMB2 TREE_CONNECT
    - ptrace: fix PTRACE_LISTEN race corrupting task->state
    - ring-buffer: Fix return value check in test_ringbuffer()
    - metag/usercopy: Drop unused macros
    - metag/usercopy: Fix alignment error checking
    - metag/usercopy: Add early abort to copy_to_user
    - metag/usercopy: Zero rest of buffer from copy_from_user
    - metag/usercopy: Set flags before ADDZ
    - metag/usercopy: Fix src fixup in from user rapf loops
    - metag/usercopy: Add missing fixups
    - powerpc/mm: Add missing global TLB invalidate if cxl is active
    - powerpc: Don't try to fix up misaligned load-with-reservation instructions
    - nios2: reserve boot memory for device tree
    - s390/decompressor: fix initrd corruption caused by bss clear
    - s390/uaccess: get_user() should zero on failure (again)
    - MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernels
    - MIPS: ralink: Fix typos in rt3883 pinctrl
    - MIPS: End spinlocks with .insn
    - MIPS: Lantiq: fix missing xbar kernel panic
    - MIPS: Flush wrong invalid FTLB entry for huge page
    - mm/mempolicy.c: fix error handling in set_mempolicy and mbind.
    - Linux 4.4.61
  * Xenial update to v4.4.60 stable release (LP: #1681862)
    - libceph: force GFP_NOIO for socket allocations
    - xen/setup: Don't relocate p2m over existing one
    - scsi: mpt3sas: fix hang on ata passthrough commands
    - scsi: sg: check length passed to SG_NEXT_CMD_LEN
    - scsi: libsas: fix ata xfer length
    - ALSA: seq: Fix race during FIFO resize
    - ALSA: hda - fix a problem for lineout on a Dell AIO machine
    - ASoC: atmel-classd: fix audio clock rate
    - ACPI: Fix incompatibility with mcount-based function graph tracing
    - ACPI: Do not create a platform_device for IOAPIC/IOxAPIC
    - tty/serial: atmel: fix race condition (TX+DMA)
    - tty/serial: atmel: fix TX path in atmel_console_write()
    - USB: fix linked-list corruption in rh_call_control()
    - KVM: x86: clear bus pointer when destroyed
    - drm/radeon: Override fpfn for all VRAM placements in radeon_evict_flags
    - mm, hugetlb: use pte_present() instead of pmd_present() in 
    - MIPS: Lantiq: Fix cascaded IRQ setup
    - rtc: s35390a: fix reading out alarm
    - rtc: s35390a: make sure all members in the output are set
    - rtc: s35390a: implement reset routine as suggested by the reference
    - rtc: s35390a: improve irq handling
    - KVM: kvm_io_bus_unregister_dev() should never fail
    - power: reset: at91-poweroff: timely shutdown LPDDR memories
    - blk: improve order of bio handling in generic_make_request()
    - blk: Ensure users for current->bio_list can see the full list.
    - padata: avoid race in reordering
    - Linux 4.4.60

  [ Ubuntu: 4.4.0-77.98 ]

  * linux: 4.4.0-77.98 -proposed tracker (LP: #1686040)
  * [Hyper-V][SAUCE] pci-hyperv: Use only 16 bit integer for PCI domain
    (LP: #1684971)
    - SAUCE: pci-hyperv: Use only 16 bit integer for PCI domain
  * Upgrade Redpine WLAN/BT driver to ver. 1.2.RC4 (LP: #1669672)
    - SAUCE: sdhci: use PCI ID to identify Dell IoT gateways
    - SAUCE: Redpine: Upgrade to ver. 1.2.RC4
    - [Config] Update CONFIG_VEN_RSI_* configs
    - SAUCE: Redpine: add copyright to kernel packages
  * Fix RX fail issue on Exar USB serial driver after resume from S3/S4
    (LP: #1685133)
    - SAUCE: xr-usb-serial: Update driver for Exar USB serial ports
  * Miscellaneous Ubuntu changes
    - [Config] updating configs to match redpine driver changes

  [ Ubuntu: 4.4.0-75.96 ]

  * linux: 4.4.0-75.96 -proposed tracker (LP: #1684441)
  * [Hyper-V] hv: util: move waiting for release to hv_utils_transport itself
    (LP: #1682561)
    - Drivers: hv: util: move waiting for release to hv_utils_transport itself

Date: 2017-04-27 19:49:14.627014+00:00
Changed-By: Thadeu Lima de Souza Cascardo <>
Signed-By: Łukasz Zemczak <>
Sorry, changesfile not available.
Xenial-changes mailing list
Modify settings or unsubscribe at:

Reply via email to