linux-hwe (4.10.0-28.32~16.04.2) xenial; urgency=low

  * linux-hwe: 4.10.0-28.32~16.04.2 -proposed tracker (LP: #1703532)

  * CVE-2017-1000364
    - mm/mmap.c: do not blow on PROT_NONE MAP_FIXED holes in the stack
    - mm/mmap.c: expand_downwards: don't require the gap if !vm_prev

  * KILLER1435-S[0489:e0a2] BT cannot search BT 4.0 device (LP: #1699651)
    - Bluetooth: btusb: Add support for 0489:e0a2 QCA_ROME device

  * aacraid driver may return uninitialized stack data to userspace
    (LP: #1700077)
    - SAUCE: scsi: aacraid: Don't copy uninitialized stack memory to userspace

  * CVE-2017-9605
    - drm/vmwgfx: Make sure backup_handle is always valid

  * CVE-2017-1000380
    - ALSA: timer: Fix race between read and ioctl
    - ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT

  * XDP eBPF programs fail to verify on Zesty ppc64el (LP: #1699627)
    - [Config] ppc64el: build for Power8 not Power7

  * AACRAID for power9 platform (LP: #1689980)
    - scripts/spelling.txt: add "therfore" pattern and fix typo instances
    - scsi: aacraid: fix PCI error recovery path
    - scsi: aacraid: pci_alloc_consistent() failures on ARM64
    - scsi: aacraid: Remove __GFP_DMA for raw srb memory
    - scsi: aacraid: Fix DMAR issues with iommu=pt
    - scsi: aacraid: Added 32 and 64 queue depth for arc natives
    - scsi: aacraid: Set correct Queue Depth for HBA1000 RAW disks
    - scsi: aacraid: Remove reset support from check_health
    - scsi: aacraid: Change wait time for fib completion
    - scsi: aacraid: Log count info of scsi cmds before reset
    - scsi: aacraid: Print ctrl status before eh reset
    - scsi: aacraid: Using single reset mask for IOP reset
    - scsi: aacraid: Rework IOP reset
    - scsi: aacraid: Add periodic checks to see IOP reset status
    - scsi: aacraid: Rework SOFT reset code
    - scsi: aacraid: Rework aac_src_restart
    - scsi: aacraid: Use correct function to get ctrl health
    - scsi: aacraid: Make sure ioctl returns on controller reset
    - scsi: aacraid: Enable ctrl reset for both hba and arc
    - scsi: aacraid: Add reset debugging statements
    - scsi: aacraid: Remove reference to Series-9
    - scsi: aacraid: Update driver version to 50834

  * arm64 kernel crashdump support (LP: #1694859)
    - memblock: add memblock_clear_nomap()
    - memblock: add memblock_cap_memory_range()
    - arm64: limit memory regions based on DT property, usable-memory-range
    - arm64: kdump: reserve memory for crash dump kernel
    - arm64: mm: add set_memory_valid()
    - arm64: mm: use phys_addr_t instead of unsigned long in __map_memblock
    - arm64: kdump: protect crash dump kernel memory
    - arm64: hibernate: preserve kdump image around hibernation
    - arm64: kdump: implement machine_crash_shutdown()
    - arm64: kdump: add VMCOREINFO's for user-space tools
    - [Config] CONFIG_CRASH_DUMP=y on arm64
    - arm64: kdump: provide /proc/vmcore file
    - Documentation: kdump: describe arm64 port
    - Documentation: dt: chosen properties for arm64 kdump
    - efi/libstub/arm*: Set default address and size cells values for an empty 
dtb

  * hibmc driver does not include "pci:" prefix in bus ID (LP: #1698700)
    - SAUCE: drm: hibmc: Use set_busid function from drm core

  * Processes in "D" state due to zap_pid_ns_processes kernel call with Ubuntu +
    Docker (LP: #1698264)
    - pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes

  * Bugfixes for  hns network driver (LP: #1696031)
    - hns_enet: use cpumask_var_t for on-stack mask
    - net: hns: fix uninitialized data use
    - net: hns: avoid gcc-7.0.1 warning for uninitialized data
    - net: hns: Add ACPI support to check SFP present
    - net: hns: Fix the implementation of irq affinity function
    - net: hns: Modify GMAC init TX threshold value
    - net: hns: Optimize the code for GMAC pad and crc Config
    - net: hns: Remove redundant memset during buffer release
    - net: hns: bug fix of ethtool show the speed
    - net: hns: Optimize hns_nic_common_poll for better performance
    - net: hns: Fix to adjust buf_size of ring according to mtu
    - net: hns: Replace netif_tx_lock to ring spin lock
    - net: hns: Correct HNS RSS key set function
    - net: hns: Remove the redundant adding and deleting mac function
    - net: hns: Remove redundant mac_get_id()
    - net: hns: Remove redundant mac table operations
    - net: hns: Clean redundant code from hns_mdio.c file
    - net: hns: Optimise the code in hns_mdio_wait_ready()
    - net: hns: Simplify the exception sequence in hns_ppe_init()
    - net: hns: Adjust the SBM module buffer threshold
    - net: hns: Avoid Hip06 chip TX packet line bug
    - net: hns: Some checkpatch.pl script & warning fixes
    - net: hns: support deferred probe when can not obtain irq
    - net: hns: support deferred probe when no mdio
    - net: hns: fix ethtool_get_strings overflow in hns driver

  * CVE-2017-7346
    - drm/vmwgfx: limit the number of mip levels in 
vmw_gb_surface_define_ioctl()

  * [SRU][Zesty] qcom_emac is unable to get ip address with at803x phy driver.
    (LP: #1696143)
    - net: qcom/emac: do not use hardware mdio automatic polling

  * hisi_sas driver updates (LP: #1695999)
    - scsi: hisi_sas: service v2 hw CQ ISR with tasklet
    - scsi: hisi_sas: lock sensitive regions when servicing CQ interrupt
    - scsi: hisi_sas: lock sensitive region in hisi_sas_slot_abort()
    - scsi: hisi_sas: workaround v2 hw SATA IO timeout issue
    - scsi: hisi_sas: modify some values of ITCT table
    - scsi: hisi_sas: downgrade refclk message
    - scsi: hisi_sas: modify hard reset for directed-attached disk
    - scsi: hisi_sas: downgrade internal abort exit print
    - scsi: hisi_sas: fix probe ordering problem
    - scsi: hisi_sas: decrease running_req in hisi_sas_slot_task_free()
    - scsi: hisi_sas: add to_hisi_sas_port()
    - scsi: hisi_sas: add controller reset
    - scsi: hisi_sas: move PHY init to hisi_sas_scan_start()
    - scsi: hisi_sas: add softreset function for SATA disk
    - scsi: hisi_sas: remove hisi_sas_port_deformed()
    - scsi: hisi_sas: error hisi_sas_task_prep() when port down
    - scsi: hisi_sas: only reset link for PHY_FUNC_LINK_RESET
    - scsi: hisi_sas: modify error handling for v2 hw
    - scsi: hisi_sas: modify hisi_sas_abort_task() for SSP
    - scsi: hisi_sas: hardreset for SATA disk in LU reset
    - scsi: hisi_sas: check for SAS_TASK_STATE_ABORTED in slot complete
    - scsi: hisi_sas: free slots after hardreset
    - scsi: hisi_sas: fix some sas_task.task_state_lock locking
    - scsi: hisi_sas: remove task free'ing for timeouts
    - scsi: hisi_sas: process error codes according to their priority
    - scsi: hisi_sas: some modifications to v2 hw reg init values
    - scsi: hisi_sas: handle PHY UP+DOWN simultaneous irq
    - scsi: hisi_sas: rename hisi_sas_link_timeout_{enable, disable}_link
    - scsi: hisi_sas: add hisi_sas_clear_nexus_ha()
    - scsi: hisi_sas: release SMP slot in lldd_abort_task
    - scsi: hisi_sas: check hisi_sas_lu_reset() error message
    - scsi: hisi_sas: use dev_is_sata to identify SATA or SAS disk
    - scsi: hisi_sas: add is_sata_phy_v2_hw()
    - scsi: hisi_sas: add missing break in switch statement
    - scsi: hisi_sas: fix SATA dependency
    - scsi: hisi_sas: workaround STP link SoC bug
    - scsi: hisi_sas: workaround a SoC SATA IO processing bug
    - scsi: hisi_sas: workaround SoC about abort timeout bug
    - scsi: hisi_sas: add v2 hw internal abort timeout workaround
    - scsi: hisi_sas: fix NULL deference when TMF timeouts
    - scsi: hisi_sas: controller reset for multi-bits ECC and AXI fatal errors

  * [SRU][Zesty] fix soft lockup on overcommited hugepages (LP: #1696165)
    - mm/migrate: fix refcount handling when !hugepage_migration_supported()

  * HiSilicon D05: installer doesn't appear on VGA (LP: #1698954)
    - d-i: Add hibmc-drm to kernel-image udeb

  * Fix /proc/cpuinfo revision for POWER9 DD2 (LP: #1698844)
    - SAUCE: powerpc: Fix /proc/cpuinfo revision for POWER9 DD2

  * CVE-2014-9900
    - net: Zeroing the structure ethtool_wolinfo in ethtool_get_wol()

  * OpenPower: Some multipaths temporarily have only a single path
    (LP: #1696445)
    - scsi: ses: don't get power status of SES device slot on probe

Date: 2017-07-20 10:15:12.839476+00:00
Changed-By: Andy Whitcroft <a...@canonical.com>
Signed-By: Łukasz Zemczak <lukasz.zemc...@canonical.com>
https://launchpad.net/ubuntu/+source/linux-hwe/4.10.0-28.32~16.04.2
Sorry, changesfile not available.
-- 
Xenial-changes mailing list
Xenial-changes@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/xenial-changes

Reply via email to