Anders Blomdell wrote:
> Jan Kiszka wrote:
>> Hi Dmitry,
>>
>> Dmitry Adamushko wrote:
>>
>>> Hi Jan,
>>>
>>> let's make yet another revision of the bits :
>>>
>>> new XN_ISR_HANDLED == old XN_ISR_HANDLED + old XN_ISR_NO_ENABLE
>>>
>>> ok.
>>>
>>> new XN_ISR_NOENABLE == ~ old XN_ISR_ENABLE
>>>
>>> ok.
>>>
>>> new XN_ISR_PROPAGATE == XN_ISR_CHAINED
>>>
>>> ok.
>>>
>>
>>
>> Just to make sure that you understand my weird ideas: each of the three
>> new XN_ISR_xxx above should be encoded with an individual bit
>>
>>
>>> new XN_ISR_NOINT == ?
>>>
>>> does it suppose the interrupt line to be .end-ed (enabled) and irq
>>> not to be
>>> propagated? Should be so, I guess, if it's different from 5). Then
>>> nucleus
>>> ignores implicit IRQ enable for 5) as well as for 3).
>>>
>>> Do we really need that NOINT then, as it seems to be the same as
>>> ~HANDLED?
>>>
>>> or NOINT == 0 and then it's a scalar value, not a bit.
>>>
>>> So one may consider HANDLED == 1 and NOINT == 0 as really scalar values
>>>
>>> and
>>>
>>> NOENABLE and PROPAGATE as additional bits (used only if needed).
>>>
>>
>>
>> My idea is to urge the user specifying one of the base return types
>> (HANDLED or NOINT) + any of the two additional bits (NOENABLE and
>> PROPAGATE).
>>
>> For correct drivers NOINT could be 0 indeed, but to check that the user
>> picked a new constant we may want to set NOINT != 0. With the old API
>> "return 0" expressed HANDLED + ~ENABLE for the old API. With the new one
>> the user signals no interest and the nucleus may raise a warning that a
>> spurious IRQ occurred. So I would add a debug bit for NOINT here to
>> optionally (on OPT_XENO_DEBUG) detect old-style usage (return 0).
>> Moreover, we gain freedom to move bits in the future when every state is
>> encoded via constants. Or am I too paranoid here?
> After reading the above discussion (of which I understand very little),
> and looking at (what I believe to be) the relevant code:
>
> + intr = shirq->handlers;
> +
> + while (intr)
> + {
> + s |= intr->isr(intr);
> + ++intr->hits;
> + intr = intr->next;
> + }
> + xnintr_shirq_unlock(shirq);
> +
> + --sched->inesting;
> +
> + if (s & XN_ISR_ENABLE)
> + xnarch_end_irq(irq);
> + else if (s & XN_ISR_CHAINED)
> + xnarch_chain_irq(irq);
>
> A number of questions arise:
>
> 1. What happens if one of the shared handlers leaves the interrupt
> asserted, returns NOENABLE|HANDLED and another return only HANDLED?
>
> 2. What happens if one returns PROPAGATE and another returns HANDLED?
>
> As far as I can tell, after all RT handlers havve run, the following
> scenarios are possible:
>
> 1. The interrupt is deasserted (i.e. it was a RT interrupt)
> 2. The interrupt is still asserted, it will be deasserted later
> by some RT task (i.e. it was a RT interrupt)
> 3. The interrupt is still asserted and will be deasserted
> by the Linux IRQ handler.
>
> IMHO that leads to the conclusion that the IRQ handlers should return a
> scalar
>
> #define UNHANDLED 0
> #define HANDLED_ENABLE 1
> #define HANDLED_NOENABLE 2
> #define PROPAGATE 3
>
> and the loop should be
>
> s = UNHANDLED
> while (intr) {
> tmp = intr->isr(intr);
> if (tmp > s) { s = tmp; }
> intr = intr->next;
> }
> if (s == PROPAGATE) {
> xnarch_chain_irq(irq);
> } else if (s == HANDLED_ENABLE) {
> xnarch_end_irq(irq);
> }This is a very useful suggestion, specifically this escalation of the return value in the shared case. I would just let UNHANLDED start with 1 for the reasons I explained here: https://mail.gna.org/public/xenomai-core/2006-02/msg00186.html Ok, I would say let's got for this and finalise the patch! > > To be really honest, I think that PROPAGATE should be excluded from the > RT IRQ-handlers, since with the current scheme all RT-handlers has to > test if the IRQ was a Linux interrupt (otherwise the system will only > work when the handler that returns PROPAGATE is installed) > Indeed, but I'm with Philippe here: do not exclude the strange corner case scenarios users may craft with the appropriate care. I could, e.g., imagine a scenario where an RT handler takes the arrival time stamp of a non-RT IRQ and then propagates it. Jsn
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Xenomai-core mailing list [email protected] https://mail.gna.org/listinfo/xenomai-core
