Benjamin ZORES wrote:
> Wolfgang Grandegger wrote:
>> Benjamin ZORES wrote:
>>> Philippe Gerum wrote:
>>>> Yes. I have tested 2.6.22-DENX over two Freescale boards, namely 
>>>> mpc52xx
>>>> and mpc8548, using this very same setup. Btw, you will need to pick
>>>> 2.0-01 which landed today in the repo, since I fixed a couple of issues
>>>> (one being serious) there.
>>>>   
>>> Thanks for the info about 2.0 issue.
>>>>> And is the DENX patch specific to DENX tree or can it be applied/used
>>>>> from vanilla kernel tree ?
>>>>>
>>>>>     
>>>> It should apply to the vanilla tree without too much fuss, but the
>>>> reference tree for the I-pipe/powerpc work is the DENX one, AFAIC.
>>>>
>>>>   
>>> FYI, Adeos 2.0 / Xenomai 2.4 works fine on my PowerPC boards too.
>>> BTW, 2.6.23-rc5 patch does not apply "as it" on -rc7 and -rc8
>>> (for ppc64 part at least).
>> Because head_4xx.S has been renamed to head_40x.S in 
>> arch/powerpc/kernel recently :-(.
>>
>> Wolfgang.
>>
> No, it was due to changes in code in time.c and process.c iirc.

I applied adeos-ipipe-2.6.23-rc5-powerpc-DENX-2.0-01.patch to the 
2.6.23-rc7 version of linux-2.6-denx. Seems you are using the official 
kernel linux-2.6 tree.

Wolfgang.


_______________________________________________
Xenomai-core mailing list
Xenomai-core@gna.org
https://mail.gna.org/listinfo/xenomai-core

Reply via email to