Hi Gilles,

Gilles Chanteperdrix a écrit :
> Hi,
> Since I started talking about it, I have run build tests fixing a few
> things here and there. The current status is this (still at the same
> place: http://sisyphus.hd.free.fr/~gilles/bx):
> * analogy: I have tried to disable some parts of analogy when compiling
> on machines without CONFIG_PCI, as compiling parts using PCI on a
> machine without PCI support, give various levels of warning and even
> errors depending on the architecture. Doing this, I stumbled across this
> compilation error:
> http://sisyphus.hd.free.fr/~gilles/bx/beagle/2.6.28-arm-none-linux-gnueabi-gcc-4.3.3/log.html#1
> this is with CONFIG_NI_MIO, but without CONFIG_NI_MITE.
> So, Alex, could you:
> - fix that error, if this combination is supposed to make sense
> - fix the Kconfig/Makefile so that no PCI code is compiled if CONFIG_PCI
> is not set (I tried and do this myself, but better one who knows than
> 100 who have to search...). As I said, doing this result in various
> levels of success depending on the architecture.
> * blackfin: I finally compiled blackfin! had to build a toolchain for
> that as the binary-only toolchain from analog.com uses glibc 2.8 and
> mine is 2.7. However, blackfin does not compile very well, as can be
> seen by the log:
> http://sisyphus.hd.free.fr/~gilles/bx/bf537-stamp/2.6.30-bfin-uclinux-gcc-4.1.2/log.html#1
> It may happen that my toolchain is buggy or outdated though.
> * rtcan: on blackfin we seem to have a conflict with rtcan.
> The warning is about CAN_ERR_MASK, sure blackfin is a bit strange to
> define this in core headers which are included everywhere. This said,
> not prefixing a Xenomai symbol with something like XN seems to be asking
> for trouble. Wolfgang, do you think it would be possible to rename the
> symbols with such prefix? Or do you share some code with socket-can that
> you do not want to touch?
> * nios2: I am lacking some important file needed to even start to compile.
You may use this tutorial on how to use Xenomai on NIOS 2 softcore 


> Thanks in advance for your efforts.
> Regards.

Patrice Kadionik. F6KQH / F4CUQ

+"Tout doit etre aussi simple que possible, pas seulement plus simple" +
+ Patrice Kadionik             http://www.enseirb.fr/~kadionik         +
+ IMS Laboratory               http://www.ims-bordeaux.fr/             +
+ ENSEIRB                      http://www.enseirb.fr                   +
+ PO BOX 99                    fax   : +33               +
+ 33402 TALENCE Cedex          voice : +33               +
+ FRANCE                       mailto:patrice.kadio...@ims-bordeaux.fr +

Xenomai-core mailing list

Reply via email to