Module: xenomai-gch
Branch: for-2.4
Commit: cdf9b85cb234c1a3ed3b2d6433da79d2bc32d5f9
URL:
http://git.xenomai.org/?p=xenomai-gch.git;a=commit;h=cdf9b85cb234c1a3ed3b2d6433da79d2bc32d5f9
Author: Sebastian Smolorz <smol...@rts.uni-hannover.de>
Date: Sat Sep 12 00:17:50 2009 +0200
can: add support for SJA1000 based PCI CAN interface cards from ESD GmbH
This patch adds support for SJA1000 based PCI CAN interface cards from
electronic system design gmbh.
The following list of boards are supported:
CAN-PCI/200 (tested)
CAN-PCI/266
CAN-PMC266
CAN-PCIe/2000
CAN-CPCI/200
CAN-PCI104
The patch is based on the Socket-CAN driver for those boards by
Matthias Fuchs.
Signed-off-by: Sebastian Smolorz <smol...@rts.uni-hannover.de>
Acked-by: Wolfgang Grandegger <w...@grandegger.com>
---
ksrc/drivers/can/sja1000/Kconfig | 11 +
ksrc/drivers/can/sja1000/Makefile | 7 +
ksrc/drivers/can/sja1000/rtcan_esd_pci.c | 354 ++++++++++++++++++++++++++++++
3 files changed, 372 insertions(+), 0 deletions(-)
diff --git a/ksrc/drivers/can/sja1000/Kconfig b/ksrc/drivers/can/sja1000/Kconfig
index 4d0ed48..53abdd9 100644
--- a/ksrc/drivers/can/sja1000/Kconfig
+++ b/ksrc/drivers/can/sja1000/Kconfig
@@ -52,6 +52,17 @@ config XENO_DRIVERS_CAN_SJA1000_EMS_PCI
working, Xenomai's shared interrupt support must be enabled.
+config XENO_DRIVERS_CAN_SJA1000_ESD_PCI
+ depends on XENO_DRIVERS_CAN_SJA1000
+ tristate "ESD PCI Cards"
+ help
+
+ This driver supports the esd PCI CAN cards CAN-PCI/200,
+ CAN-PCI/266, CAN-PMC/266 (PMC), CAN-CPCI/200 (CompactPCI),
+ CAN-PCIe2000 (PCI Express) and CAN-PCI104/200 (PCI104)
+ from the esd electronic system design gmbh (http://www.esd.eu).
+
+
config XENO_DRIVERS_CAN_SJA1000_PEAK_DNG
depends on XENO_DRIVERS_CAN_SJA1000
tristate "PEAK Parallel Port Dongle"
diff --git a/ksrc/drivers/can/sja1000/Makefile
b/ksrc/drivers/can/sja1000/Makefile
index 1db102e..09a03ab 100644
--- a/ksrc/drivers/can/sja1000/Makefile
+++ b/ksrc/drivers/can/sja1000/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_PEAK_PCI) +=
xeno_can_peak_pci.o
obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_PEAK_DNG) += xeno_can_peak_dng.o
obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_IXXAT_PCI) += xeno_can_ixxat_pci.o
obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_EMS_PCI) += xeno_can_ems_pci.o
+obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_ESD_PCI) += xeno_can_esd_pci.o
obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_ISA) += xeno_can_isa.o
obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_MEM) += xeno_can_mem.o
@@ -17,6 +18,7 @@ xeno_can_peak_pci-y := rtcan_peak_pci.o
xeno_can_peak_dng-y := rtcan_peak_dng.o
xeno_can_ixxat_pci-y := rtcan_ixxat_pci.o
xeno_can_ems_pci-y := rtcan_ems_pci.o
+xeno_can_esd_pci-y := rtcan_esd_pci.o
xeno_can_isa-y := rtcan_isa.o
xeno_can_mem-y := rtcan_mem.o
@@ -31,6 +33,7 @@ obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_PEAK_PCI) +=
xeno_can_peak_pci.o
obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_PEAK_DNG) += xeno_can_peak_dng.o
obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_IXXAT_PCI) += xeno_can_ixxat_pci.o
obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_EMS_PCI) += xeno_can_ems_pci.o
+obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_ESD_PCI) += xeno_can_esd_pci.o
obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_ISA) += xeno_can_isa.o
obj-$(CONFIG_XENO_DRIVERS_CAN_SJA1000_MEM) += xeno_can_mem.o
@@ -41,6 +44,7 @@ xeno_can_peak_pci-objs := rtcan_peak_pci.o
xeno_can_peak_dng-objs := rtcan_peak_dng.o
xeno_can_ixxat_pci-objs := rtcan_ixxat_pci.o
xeno_can_ems_pci-objs := rtcan_ems_pci.o
+xeno_can_esd_pci-objs := rtcan_esd_pci.o
xeno_can_isa-objs := rtcan_isa.o
xeno_can_mem-objs := rtcan_mem.o
@@ -65,6 +69,9 @@ xeno_can_ixxat_pci.o: $(xeno_can_ixxat_pci-objs)
xeno_can_ems_pci.o: $(xeno_can_ems_pci-objs)
$(LD) -r -o $@ $(xeno_can_ems_pci-objs)
+xeno_can_esd_pci.o: $(xeno_can_esd_pci-objs)
+ $(LD) -r -o $@ $(xeno_can_esd_pci-objs)
+
xeno_can_isa.o: $(xeno_can_isa-objs)
$(LD) -r -o $@ $(xeno_can_isa-objs)
diff --git a/ksrc/drivers/can/sja1000/rtcan_esd_pci.c
b/ksrc/drivers/can/sja1000/rtcan_esd_pci.c
new file mode 100644
index 0000000..79cf8b6
--- /dev/null
+++ b/ksrc/drivers/can/sja1000/rtcan_esd_pci.c
@@ -0,0 +1,354 @@
+/*
+ * Copyright (C) 2009 Sebastian Smolorz <se...@gmx.net>
+ *
+ * This driver is based on the Socket-CAN driver esd_pci.c,
+ * Copyright (C) 2007 Wolfgang Grandegger <w...@grandegger.com>
+ * Copyright (C) 2008 Sascha Hauer <s.ha...@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Matthias Fuchs <matthias.fu...@esd.eu>, esd gmbh
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#include <rtdm/rtdm_driver.h>
+
+/* CAN device profile */
+#include <rtdm/rtcan.h>
+#include <rtcan_dev.h>
+#include <rtcan_raw.h>
+#include <rtcan_internal.h>
+#include <rtcan_sja1000.h>
+#include <rtcan_sja1000_regs.h>
+
+#define RTCAN_DEV_NAME "rtcan%d"
+#define RTCAN_DRV_NAME "ESD-PCI-CAN"
+
+static char *esd_pci_board_name = "ESD-PCI";
+
+MODULE_AUTHOR("Sebastian Smolorz <se...@gmx.net");
+MODULE_DESCRIPTION("RTCAN board driver for esd PCI/PMC/CPCI/PCIe/PCI104 " \
+ "CAN cards");
+MODULE_SUPPORTED_DEVICE("esd CAN-PCI/200, CAN-PCI/266, CAN-PMC266, " \
+ "CAN-PCIe/2000, CAN-CPCI/200, CAN-PCI104");
+MODULE_LICENSE("GPL v2");
+
+struct rtcan_esd_pci {
+ struct pci_dev *pci_dev;
+ struct rtcan_device *slave_dev;
+ void __iomem *conf_addr;
+ void __iomem *base_addr;
+};
+
+#define ESD_PCI_CAN_CLOCK (16000000 / 2)
+
+#define ESD_PCI_OCR (SJA_OCR_TX0_PUSHPULL | SJA_OCR_TX1_PUSHPULL | \
+ SJA_OCR_TX1_INVERT | SJA_OCR_MODE_CLOCK)
+#define ESD_PCI_CDR (SJA_CDR_CLK_OFF | SJA_CDR_CBP | \
+ SJA_CDR_CAN_MODE)
+
+#define CHANNEL_SINGLE 0 /* this is a single channel device */
+#define CHANNEL_MASTER 1 /* multi channel device, this device is master */
+#define CHANNEL_SLAVE 2 /* multi channel device, this is slave */
+
+#define CHANNEL_OFFSET 0x100
+
+#define INTCSR_OFFSET 0x4c /* Offset in PLX9050 conf registers */
+#define INTCSR_LINTI1 (1 << 0)
+#define INTCSR_PCI (1 << 6)
+
+#define INTCSR9056_OFFSET 0x68 /* Offset in PLX9056 conf registers */
+#define INTCSR9056_LINTI (1 << 11)
+#define INTCSR9056_PCI (1 << 8)
+
+#ifndef PCI_DEVICE_ID_PLX_9056
+# define PCI_DEVICE_ID_PLX_9056 0x9056
+#endif
+
+/* PCI subsystem IDs of esd's SJA1000 based CAN cards */
+
+/* CAN-PCI/200: PCI, 33MHz only, bridge: PLX9050 */
+#define ESD_PCI_SUB_SYS_ID_PCI200 0x0004
+
+/* CAN-PCI/266: PCI, 33/66MHz, bridge: PLX9056 */
+#define ESD_PCI_SUB_SYS_ID_PCI266 0x0009
+
+/* CAN-PMC/266: PMC module, 33/66MHz, bridge: PLX9056 */
+#define ESD_PCI_SUB_SYS_ID_PMC266 0x000e
+
+/* CAN-CPCI/200: Compact PCI, 33MHz only, bridge: PLX9030 */
+#define ESD_PCI_SUB_SYS_ID_CPCI200 0x010b
+
+/* CAN-PCIE/2000: PCI Express 1x, bridge: PEX8311 = PEX8111 + PLX9056 */
+#define ESD_PCI_SUB_SYS_ID_PCIE2000 0x0200
+
+/* CAN-PCI/104: PCI104 module, 33MHz only, bridge: PLX9030 */
+#define ESD_PCI_SUB_SYS_ID_PCI104200 0x0501
+
+static struct pci_device_id esd_pci_tbl[] = {
+ {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI200},
+ {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056,
+ PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI266},
+ {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056,
+ PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PMC266},
+ {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+ PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_CPCI200},
+ {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056,
+ PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCIE2000},
+ {PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+ PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI104200},
+ {0,}
+};
+
+#define ESD_PCI_BASE_SIZE 0x200
+
+MODULE_DEVICE_TABLE(pci, esd_pci_tbl);
+
+
+static u8 rtcan_esd_pci_read_reg(struct rtcan_device *dev, int port)
+{
+ struct rtcan_esd_pci *board = (struct rtcan_esd_pci *)dev->board_priv;
+ return readb(board->base_addr + port);
+}
+
+static void rtcan_esd_pci_write_reg(struct rtcan_device *dev, int port, u8 val)
+{
+ struct rtcan_esd_pci *board = (struct rtcan_esd_pci *)dev->board_priv;
+ writeb(val, board->base_addr + port);
+}
+
+static void rtcan_esd_pci_del_chan(struct rtcan_device *dev)
+{
+ struct rtcan_esd_pci *board;
+
+ if (!dev)
+ return;
+
+ board = (struct rtcan_esd_pci *)dev->board_priv;
+
+ printk("Removing %s %s device %s\n",
+ esd_pci_board_name, dev->ctrl_name, dev->name);
+
+ rtcan_sja1000_unregister(dev);
+
+ rtcan_dev_free(dev);
+}
+
+static int rtcan_esd_pci_add_chan(struct pci_dev *pdev, int channel,
+ struct rtcan_device **master_dev,
+ void __iomem *conf_addr,
+ void __iomem *base_addr)
+{
+ struct rtcan_device *dev;
+ struct rtcan_sja1000 *chip;
+ struct rtcan_esd_pci *board;
+ int ret;
+
+ dev = rtcan_dev_alloc(sizeof(struct rtcan_sja1000),
+ sizeof(struct rtcan_esd_pci));
+ if (dev == NULL)
+ return -ENOMEM;
+
+ chip = (struct rtcan_sja1000 *)dev->priv;
+ board = (struct rtcan_esd_pci *)dev->board_priv;
+
+ board->pci_dev = pdev;
+ board->conf_addr = conf_addr;
+ board->base_addr = base_addr;
+
+ if (channel == CHANNEL_SLAVE) {
+ struct rtcan_esd_pci *master_board =
+ (struct rtcan_esd_pci *)(*master_dev)->board_priv;
+ master_board->slave_dev = dev;
+ }
+
+ dev->board_name = esd_pci_board_name;
+
+ chip->read_reg = rtcan_esd_pci_read_reg;
+ chip->write_reg = rtcan_esd_pci_write_reg;
+
+ dev->can_sys_clock = ESD_PCI_CAN_CLOCK;
+
+ chip->ocr = ESD_PCI_OCR;
+ chip->cdr = ESD_PCI_CDR;
+
+ strncpy(dev->name, RTCAN_DEV_NAME, IFNAMSIZ);
+
+ chip->irq_flags = RTDM_IRQTYPE_SHARED;
+ chip->irq_num = pdev->irq;
+
+ RTCAN_DBG("%s: base_addr=0x%p conf_addr=0x%p irq=%d ocr=%#x cdr=%#x\n",
+ RTCAN_DRV_NAME, board->base_addr, board->conf_addr,
+ chip->irq_num, chip->ocr, chip->cdr);
+
+ /* Register SJA1000 device */
+ ret = rtcan_sja1000_register(dev);
+ if (ret) {
+ printk(KERN_ERR "ERROR %d while trying to register SJA1000 "
+ "device!\n", ret);
+ goto failure;
+ }
+
+ if (channel != CHANNEL_SLAVE)
+ *master_dev = dev;
+
+ return 0;
+
+
+failure:
+ rtcan_dev_free(dev);
+ return ret;
+}
+
+static int __devinit esd_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int ret, channel;
+ void __iomem *base_addr;
+ void __iomem *conf_addr;
+ struct rtcan_device *master_dev = NULL;
+
+ if ((ret = pci_enable_device (pdev)))
+ goto failure;
+
+ if ((ret = pci_request_regions(pdev, RTCAN_DRV_NAME)))
+ goto failure;
+
+ RTCAN_DBG("%s: Initializing device %04x:%04x %04x:%04x\n",
+ RTCAN_DRV_NAME, pdev->vendor, pdev->device,
+ pdev->subsystem_vendor, pdev->subsystem_device);
+
+ conf_addr = pci_iomap(pdev, 0, ESD_PCI_BASE_SIZE);
+ if (conf_addr == NULL) {
+ ret = -ENODEV;
+ goto failure_release_pci;
+ }
+
+ base_addr = pci_iomap(pdev, 2, ESD_PCI_BASE_SIZE);
+ if (base_addr == NULL) {
+ ret = -ENODEV;
+ goto failure_iounmap_conf;
+ }
+
+ /* Check if second channel is available */
+ writeb(SJA_MOD_RM, base_addr + CHANNEL_OFFSET + SJA_MOD);
+ writeb(SJA_CDR_CBP, base_addr + CHANNEL_OFFSET + SJA_CDR);
+ writeb(SJA_MOD_RM, base_addr + CHANNEL_OFFSET + SJA_MOD);
+ if (readb(base_addr + CHANNEL_OFFSET + SJA_MOD) == 0x21) {
+ writeb(SJA_MOD_SM | SJA_MOD_AFM | SJA_MOD_STM | SJA_MOD_LOM |
+ SJA_MOD_RM, base_addr + CHANNEL_OFFSET + SJA_MOD);
+ if (readb(base_addr + CHANNEL_OFFSET + SJA_MOD) == 0x3f)
+ channel = CHANNEL_MASTER;
+ else {
+ writeb(SJA_MOD_RM,
+ base_addr + CHANNEL_OFFSET + SJA_MOD);
+ channel = CHANNEL_SINGLE;
+ }
+ } else {
+ writeb(SJA_MOD_RM, base_addr + CHANNEL_OFFSET + SJA_MOD);
+ channel = CHANNEL_SINGLE;
+ }
+
+ if ((ret = rtcan_esd_pci_add_chan(pdev, channel, &master_dev,
+ conf_addr, base_addr)))
+ goto failure_iounmap_base;
+
+ if (channel != CHANNEL_SINGLE) {
+ channel = CHANNEL_SLAVE;
+ if ((ret = rtcan_esd_pci_add_chan(pdev, channel, &master_dev,
+ conf_addr, base_addr + CHANNEL_OFFSET)))
+ goto failure_iounmap_base;
+ }
+
+ if ((pdev->device == PCI_DEVICE_ID_PLX_9050) ||
+ (pdev->device == PCI_DEVICE_ID_PLX_9030)) {
+ /* Enable interrupts in PLX9050 */
+ writel(INTCSR_LINTI1 | INTCSR_PCI, conf_addr + INTCSR_OFFSET);
+ } else {
+ /* Enable interrupts in PLX9056*/
+ writel(INTCSR9056_LINTI | INTCSR9056_PCI,
+ conf_addr + INTCSR9056_OFFSET);
+ }
+
+ pci_set_drvdata(pdev, master_dev);
+
+ return 0;
+
+
+failure_iounmap_base:
+ if (master_dev)
+ rtcan_esd_pci_del_chan(master_dev);
+ pci_iounmap(pdev, base_addr);
+
+failure_iounmap_conf:
+ pci_iounmap(pdev, conf_addr);
+
+failure_release_pci:
+ pci_release_regions(pdev);
+
+failure:
+ return ret;
+}
+
+static void __devexit esd_pci_remove_one(struct pci_dev *pdev)
+{
+ struct rtcan_device *dev = pci_get_drvdata(pdev);
+ struct rtcan_esd_pci *board = (struct rtcan_esd_pci *)dev->board_priv;
+
+ if ((pdev->device == PCI_DEVICE_ID_PLX_9050) ||
+ (pdev->device == PCI_DEVICE_ID_PLX_9030)) {
+ /* Disable interrupts in PLX9050*/
+ writel(0, board->conf_addr + INTCSR_OFFSET);
+ } else {
+ /* Disable interrupts in PLX9056*/
+ writel(0, board->conf_addr + INTCSR9056_OFFSET);
+ }
+
+ if (board->slave_dev)
+ rtcan_esd_pci_del_chan(board->slave_dev);
+ rtcan_esd_pci_del_chan(dev);
+
+
+ pci_iounmap(pdev, board->base_addr);
+ pci_iounmap(pdev, board->conf_addr);
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static struct pci_driver rtcan_esd_pci_driver = {
+ .name = RTCAN_DRV_NAME,
+ .id_table = esd_pci_tbl,
+ .probe = esd_pci_init_one,
+ .remove = __devexit_p(esd_pci_remove_one),
+};
+
+static int __init rtcan_esd_pci_init(void)
+{
+ return pci_register_driver(&rtcan_esd_pci_driver);
+}
+
+static void __exit rtcan_esd_pci_exit(void)
+{
+ pci_unregister_driver(&rtcan_esd_pci_driver);
+}
+
+module_init(rtcan_esd_pci_init);
+module_exit(rtcan_esd_pci_exit);
_______________________________________________
Xenomai-git mailing list
Xenomai-git@gna.org
https://mail.gna.org/listinfo/xenomai-git
