Module: xenomai-3
Branch: next
Commit: d351f712bc9b03d621b454b55fe3e46a0000294a
URL:    
http://git.xenomai.org/?p=xenomai-3.git;a=commit;h=d351f712bc9b03d621b454b55fe3e46a0000294a

Author: Philippe Gerum <r...@xenomai.org>
Date:   Thu Jan  1 18:15:36 2015 +0100

copperplate: add configuration tunable for registry moint point

--enable-registry[=/registry-mount-point]

Defaults to /mnt/xenomai.

---

 configure                             |   25 +-
 configure.ac                          |    7 +-
 include/xeno_config.h.in              |    3 +
 lib/copperplate/init.c                |    8 +-
 lib/copperplate/internal.h            |    4 +-
 testsuite/smokey/Makefile.in          |    6 +-
 testsuite/smokey/sigdebug/Makefile.in |  646 +++++++++++++++++++++++++
 utils/Makefile.in                     |    4 +-
 utils/net/Makefile.in                 |  845 +++++++++++++++++++++++++++++++++
 9 files changed, 1531 insertions(+), 17 deletions(-)

diff --git a/configure b/configure
index a9c7938..2687bf0 100755
--- a/configure
+++ b/configure
@@ -12933,12 +12933,12 @@ if test "${enable_debug+set}" = set; then :
                debug_symbols=y
                ;;
        y | yes | partial)
-               debug_mode=partial
-               debug_symbols=y
+               debug_mode=partial
+               debug_symbols=y
                ;;
        full)
                debug_mode=full
-               debug_symbols=y
+               debug_symbols=y
                ;;
        n | no)
                debug_mode=
@@ -13091,18 +13091,20 @@ fi
 
 
 use_registry=
+registry_root=
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the registry should 
be enabled" >&5
 $as_echo_n "checking whether the registry should be enabled... " >&6; }
 # Check whether --enable-registry was given.
 if test "${enable_registry+set}" = set; then :
   enableval=$enable_registry; case "$enableval" in
-       y | yes) use_registry=y ;;
+       y | yes) use_registry=yes; registry_root=/mnt/xenomai ;;
+       /*) use_registry=yes; registry_root=$enableval ;;
        *) unset use_registry ;;
        esac
 fi
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${use_registry:-no}" >&5
-$as_echo "${use_registry:-no}" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: 
${use_registry:-no}${registry_root:+, mounted on ${registry_root}}" >&5
+$as_echo "${use_registry:-no}${registry_root:+, mounted on ${registry_root}}" 
>&6; }
 
 if test x$use_registry = xy; then
 
@@ -13320,6 +13322,11 @@ fi
 
 $as_echo "#define CONFIG_XENO_REGISTRY 1" >>confdefs.h
 
+
+cat >>confdefs.h <<_ACEOF
+#define CONFIG_XENO_REGISTRY_ROOT "$registry_root"
+_ACEOF
+
 fi
  if test x$use_registry = xy; then
   XENO_REGISTRY_TRUE=
@@ -14342,7 +14349,7 @@ fi
 
 
 
-ac_config_files="$ac_config_files Makefile config/Makefile scripts/Makefile 
scripts/xeno-config:scripts/xeno-config-$rtcore_type.in scripts/xeno 
lib/Makefile lib/boilerplate/Makefile lib/cobalt/Makefile 
lib/cobalt/arch/Makefile lib/cobalt/arch/arm/Makefile 
lib/cobalt/arch/arm/include/Makefile lib/cobalt/arch/arm/include/asm/Makefile 
lib/cobalt/arch/arm/include/asm/xenomai/Makefile 
lib/cobalt/arch/powerpc/Makefile lib/cobalt/arch/powerpc/include/Makefile 
lib/cobalt/arch/powerpc/include/asm/Makefile 
lib/cobalt/arch/powerpc/include/asm/xenomai/Makefile 
lib/cobalt/arch/blackfin/Makefile lib/cobalt/arch/blackfin/include/Makefile 
lib/cobalt/arch/blackfin/include/asm/Makefile 
lib/cobalt/arch/blackfin/include/asm/xenomai/Makefile 
lib/cobalt/arch/x86/Makefile lib/cobalt/arch/x86/include/Makefile 
lib/cobalt/arch/x86/include/asm/Makefile 
lib/cobalt/arch/x86/include/asm/xenomai/Makefile lib/cobalt/arch/nios2/Makefile 
lib/cobalt/arch/nios2/include/Makefile lib/cobalt/arch/nios2/include/asm/Makef
 ile lib/cobalt/arch/nios2/include/asm/xenomai/Makefile 
lib/cobalt/arch/sh/Makefile lib/cobalt/arch/sh/include/Makefile 
lib/cobalt/arch/sh/include/asm/Makefile 
lib/cobalt/arch/sh/include/asm/xenomai/Makefile lib/copperplate/Makefile 
lib/copperplate/regd/Makefile lib/alchemy/Makefile lib/vxworks/Makefile 
lib/psos/Makefile lib/analogy/Makefile lib/smokey/Makefile lib/trank/Makefile 
testsuite/Makefile testsuite/latency/Makefile testsuite/switchtest/Makefile 
testsuite/smokey/Makefile testsuite/smokey/arith/Makefile 
testsuite/smokey/sched-quota/Makefile testsuite/smokey/sched-tp/Makefile 
testsuite/smokey/rtdm/Makefile testsuite/smokey/vdso-access/Makefile 
testsuite/smokey/cond-torture/Makefile testsuite/smokey/mutex-torture/Makefile 
testsuite/smokey/xddp/Makefile testsuite/smokey/iddp/Makefile 
testsuite/smokey/bufp/Makefile testsuite/smokey/fork-exec/Makefile 
testsuite/clocktest/Makefile testsuite/xeno-test/Makefile 
testsuite/regression/Makefile testsuite/regression/posix/Makefile utils/M
 akefile utils/can/Makefile utils/analogy/Makefile utils/ps/Makefile 
utils/slackspot/Makefile utils/autotune/Makefile demo/Makefile 
demo/posix/Makefile demo/posix/cobalt/Makefile demo/alchemy/Makefile 
demo/alchemy/cobalt/Makefile include/Makefile include/cobalt/uapi/Makefile 
include/cobalt/uapi/asm-generic/Makefile include/cobalt/uapi/kernel/Makefile 
include/cobalt/Makefile include/cobalt/sys/Makefile 
include/cobalt/kernel/Makefile include/cobalt/kernel/rtdm/Makefile 
include/cobalt/kernel/rtdm/analogy/Makefile include/cobalt/boilerplate/Makefile 
include/rtdm/Makefile include/rtdm/uapi/Makefile include/mercury/Makefile 
include/mercury/boilerplate/Makefile include/boilerplate/Makefile 
include/copperplate/Makefile include/alchemy/Makefile include/vxworks/Makefile 
include/psos/Makefile include/smokey/Makefile include/trank/Makefile 
include/trank/posix/Makefile include/trank/native/Makefile 
include/trank/rtdm/Makefile doc/Makefile doc/doxygen/Makefile 
doc/doxygen/xeno3prm-common.conf doc/
 doxygen/xeno3prm-html.conf doc/doxygen/xeno3prm-latex.conf doc/gitdoc/Makefile 
doc/asciidoc/Makefile"
+ac_config_files="$ac_config_files Makefile config/Makefile scripts/Makefile 
scripts/xeno-config:scripts/xeno-config-$rtcore_type.in scripts/xeno 
lib/Makefile lib/boilerplate/Makefile lib/cobalt/Makefile 
lib/cobalt/arch/Makefile lib/cobalt/arch/arm/Makefile 
lib/cobalt/arch/arm/include/Makefile lib/cobalt/arch/arm/include/asm/Makefile 
lib/cobalt/arch/arm/include/asm/xenomai/Makefile 
lib/cobalt/arch/powerpc/Makefile lib/cobalt/arch/powerpc/include/Makefile 
lib/cobalt/arch/powerpc/include/asm/Makefile 
lib/cobalt/arch/powerpc/include/asm/xenomai/Makefile 
lib/cobalt/arch/blackfin/Makefile lib/cobalt/arch/blackfin/include/Makefile 
lib/cobalt/arch/blackfin/include/asm/Makefile 
lib/cobalt/arch/blackfin/include/asm/xenomai/Makefile 
lib/cobalt/arch/x86/Makefile lib/cobalt/arch/x86/include/Makefile 
lib/cobalt/arch/x86/include/asm/Makefile 
lib/cobalt/arch/x86/include/asm/xenomai/Makefile lib/cobalt/arch/nios2/Makefile 
lib/cobalt/arch/nios2/include/Makefile lib/cobalt/arch/nios2/include/asm/Makef
 ile lib/cobalt/arch/nios2/include/asm/xenomai/Makefile 
lib/cobalt/arch/sh/Makefile lib/cobalt/arch/sh/include/Makefile 
lib/cobalt/arch/sh/include/asm/Makefile 
lib/cobalt/arch/sh/include/asm/xenomai/Makefile lib/copperplate/Makefile 
lib/copperplate/regd/Makefile lib/alchemy/Makefile lib/vxworks/Makefile 
lib/psos/Makefile lib/analogy/Makefile lib/smokey/Makefile lib/trank/Makefile 
testsuite/Makefile testsuite/latency/Makefile testsuite/switchtest/Makefile 
testsuite/smokey/Makefile testsuite/smokey/arith/Makefile 
testsuite/smokey/sched-quota/Makefile testsuite/smokey/sched-tp/Makefile 
testsuite/smokey/rtdm/Makefile testsuite/smokey/vdso-access/Makefile 
testsuite/smokey/cond-torture/Makefile testsuite/smokey/mutex-torture/Makefile 
testsuite/smokey/xddp/Makefile testsuite/smokey/iddp/Makefile 
testsuite/smokey/bufp/Makefile testsuite/smokey/fork-exec/Makefile 
testsuite/smokey/sigdebug/Makefile testsuite/clocktest/Makefile 
testsuite/xeno-test/Makefile testsuite/regression/Makefile testsuit
 e/regression/posix/Makefile utils/Makefile utils/can/Makefile 
utils/analogy/Makefile utils/ps/Makefile utils/slackspot/Makefile 
utils/autotune/Makefile utils/net/rtnet utils/net/rtnet.conf utils/net/Makefile 
demo/Makefile demo/posix/Makefile demo/posix/cobalt/Makefile 
demo/alchemy/Makefile demo/alchemy/cobalt/Makefile include/Makefile 
include/cobalt/uapi/Makefile include/cobalt/uapi/asm-generic/Makefile 
include/cobalt/uapi/kernel/Makefile include/cobalt/Makefile 
include/cobalt/sys/Makefile include/cobalt/kernel/Makefile 
include/cobalt/kernel/rtdm/Makefile include/cobalt/kernel/rtdm/analogy/Makefile 
include/cobalt/boilerplate/Makefile include/rtdm/Makefile 
include/rtdm/uapi/Makefile include/mercury/Makefile 
include/mercury/boilerplate/Makefile include/boilerplate/Makefile 
include/copperplate/Makefile include/alchemy/Makefile include/vxworks/Makefile 
include/psos/Makefile include/smokey/Makefile include/trank/Makefile 
include/trank/posix/Makefile include/trank/native/Makefile include/
 trank/rtdm/Makefile doc/Makefile doc/doxygen/Makefile 
doc/doxygen/xeno3prm-common.conf doc/doxygen/xeno3prm-html.conf 
doc/doxygen/xeno3prm-latex.conf doc/gitdoc/Makefile doc/asciidoc/Makefile"
 
 
 cat >confcache <<\_ACEOF
@@ -15462,6 +15469,7 @@ do
     "testsuite/smokey/iddp/Makefile") CONFIG_FILES="$CONFIG_FILES 
testsuite/smokey/iddp/Makefile" ;;
     "testsuite/smokey/bufp/Makefile") CONFIG_FILES="$CONFIG_FILES 
testsuite/smokey/bufp/Makefile" ;;
     "testsuite/smokey/fork-exec/Makefile") CONFIG_FILES="$CONFIG_FILES 
testsuite/smokey/fork-exec/Makefile" ;;
+    "testsuite/smokey/sigdebug/Makefile") CONFIG_FILES="$CONFIG_FILES 
testsuite/smokey/sigdebug/Makefile" ;;
     "testsuite/clocktest/Makefile") CONFIG_FILES="$CONFIG_FILES 
testsuite/clocktest/Makefile" ;;
     "testsuite/xeno-test/Makefile") CONFIG_FILES="$CONFIG_FILES 
testsuite/xeno-test/Makefile" ;;
     "testsuite/regression/Makefile") CONFIG_FILES="$CONFIG_FILES 
testsuite/regression/Makefile" ;;
@@ -15472,6 +15480,9 @@ do
     "utils/ps/Makefile") CONFIG_FILES="$CONFIG_FILES utils/ps/Makefile" ;;
     "utils/slackspot/Makefile") CONFIG_FILES="$CONFIG_FILES 
utils/slackspot/Makefile" ;;
     "utils/autotune/Makefile") CONFIG_FILES="$CONFIG_FILES 
utils/autotune/Makefile" ;;
+    "utils/net/rtnet") CONFIG_FILES="$CONFIG_FILES utils/net/rtnet" ;;
+    "utils/net/rtnet.conf") CONFIG_FILES="$CONFIG_FILES utils/net/rtnet.conf" 
;;
+    "utils/net/Makefile") CONFIG_FILES="$CONFIG_FILES utils/net/Makefile" ;;
     "demo/Makefile") CONFIG_FILES="$CONFIG_FILES demo/Makefile" ;;
     "demo/posix/Makefile") CONFIG_FILES="$CONFIG_FILES demo/posix/Makefile" ;;
     "demo/posix/cobalt/Makefile") CONFIG_FILES="$CONFIG_FILES 
demo/posix/cobalt/Makefile" ;;
diff --git a/configure.ac b/configure.ac
index 2d4d61d..9561224 100644
--- a/configure.ac
+++ b/configure.ac
@@ -290,19 +290,22 @@ AM_CONDITIONAL(XENO_PSHARED,[test x$use_pshared = xy])
 dnl Registry support in user-space (FUSE-based, default: off)
 
 use_registry=
+registry_root=
 AC_MSG_CHECKING(whether the registry should be enabled)
 AC_ARG_ENABLE(registry,
        AS_HELP_STRING([--enable-registry], [Export real-time objects to a 
registry]),
        [case "$enableval" in
-       y | yes) use_registry=y ;;
+       y | yes) use_registry=yes; registry_root=/mnt/xenomai ;;
+       /*) use_registry=yes; registry_root=$enableval ;;
        *) unset use_registry ;;
        esac])
-AC_MSG_RESULT(${use_registry:-no})
+AC_MSG_RESULT(${use_registry:-no}${registry_root:+[,] mounted on 
${registry_root}})
 
 if test x$use_registry = xy; then
        PKG_CHECK_MODULES(FUSE, fuse)
        FUSE_CFLAGS="$FUSE_CFLAGS -DFUSE_USE_VERSION=25"
        AC_DEFINE(CONFIG_XENO_REGISTRY,1,[config])
+       AC_DEFINE_UNQUOTED(CONFIG_XENO_REGISTRY_ROOT,"$registry_root",[config])
 fi
 AM_CONDITIONAL(XENO_REGISTRY,[test x$use_registry = xy])
 
diff --git a/include/xeno_config.h.in b/include/xeno_config.h.in
index bbe5abf..1a38e06 100644
--- a/include/xeno_config.h.in
+++ b/include/xeno_config.h.in
@@ -70,6 +70,9 @@
 #undef CONFIG_XENO_REGISTRY
 
 /* config */
+#undef CONFIG_XENO_REGISTRY_ROOT
+
+/* config */
 #undef CONFIG_XENO_REVISION_LEVEL
 
 /* config */
diff --git a/lib/copperplate/init.c b/lib/copperplate/init.c
index 9faae60..856863e 100644
--- a/lib/copperplate/init.c
+++ b/lib/copperplate/init.c
@@ -40,13 +40,15 @@
 
 struct coppernode __node_info = {
        .mem_pool = 1024 * 1024, /* Default, 1Mb. */
-       .session_label = DEFAULT_REGISTRY_SESSION,
-       .registry_root = DEFAULT_REGISTRY_ROOT,
        .no_mlock = 0,
        .no_registry = 0,
        .no_sanity = !CONFIG_XENO_SANITY,
        .reset_session = 0,
        .silent_mode = 0,
+#ifdef CONFIG_XENO_REGISTRY
+       .session_label = DEFAULT_REGISTRY_SESSION,
+       .registry_root = DEFAULT_REGISTRY_ROOT,
+#endif
 };
 
 pid_t __node_id;
@@ -177,7 +179,7 @@ static void usage(void)
 
        print_version();
         fprintf(stderr, "usage: program <options>, where options may be:\n");
-        fprintf(stderr, "--mem-pool-size=<sizeK>          size of the main 
heap (kbytes)\n");
+       fprintf(stderr, "--mem-pool-size=<sizeK>          size of the main heap 
(kbytes)\n");
         fprintf(stderr, "--no-mlock                       do not lock memory 
at init (Mercury only)\n");
         fprintf(stderr, "--registry-root=<path>           root path of 
registry\n");
         fprintf(stderr, "--no-registry                    suppress object 
registration\n");
diff --git a/lib/copperplate/internal.h b/lib/copperplate/internal.h
index 380b522..119e129 100644
--- a/lib/copperplate/internal.h
+++ b/lib/copperplate/internal.h
@@ -30,8 +30,10 @@
 #include <boilerplate/sched.h>
 #include <copperplate/heapobj.h>
 
-#define DEFAULT_REGISTRY_ROOT          "/mnt/xenomai"
+#ifdef CONFIG_XENO_REGISTRY
+#define DEFAULT_REGISTRY_ROOT          CONFIG_XENO_REGISTRY_ROOT
 #define DEFAULT_REGISTRY_SESSION       "anon"
+#endif
 
 struct coppernode {
        unsigned int mem_pool;
diff --git a/testsuite/smokey/Makefile.in b/testsuite/smokey/Makefile.in
index ccac6a4..e7d37ef 100644
--- a/testsuite/smokey/Makefile.in
+++ b/testsuite/smokey/Makefile.in
@@ -398,7 +398,8 @@ core_libs = $(am__append_1)
 @XENO_COBALT_TRUE@     sched-quota     \
 @XENO_COBALT_TRUE@     sched-tp        \
 @XENO_COBALT_TRUE@     vdso-access     \
-@XENO_COBALT_TRUE@     xddp
+@XENO_COBALT_TRUE@     xddp            \
+@XENO_COBALT_TRUE@     sigdebug
 
 plugin_list = $(foreach plugin,$(SUBDIRS),$(plugin)/lib$(plugin).a)
 # wrap-link.sh is confused by -whole-archive, so work around
@@ -432,7 +433,8 @@ DIST_SUBDIRS = \
        sched-quota     \
        sched-tp        \
        vdso-access     \
-       xddp
+       xddp            \
+       sigdebug
 
 all: all-recursive
 
diff --git a/testsuite/smokey/sigdebug/Makefile.in 
b/testsuite/smokey/sigdebug/Makefile.in
new file mode 100644
index 0000000..6dbfa2b
--- /dev/null
+++ b/testsuite/smokey/sigdebug/Makefile.in
@@ -0,0 +1,646 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \  ]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs  ]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = testsuite/smokey/sigdebug
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+       $(top_srcdir)/config/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/ac_prog_cc_for_build.m4 \
+       $(top_srcdir)/config/libtool.m4 \
+       $(top_srcdir)/config/ltoptions.m4 \
+       $(top_srcdir)/config/ltsugar.m4 \
+       $(top_srcdir)/config/ltversion.m4 \
+       $(top_srcdir)/config/lt~obsolete.m4 \
+       $(top_srcdir)/config/version-label $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+       $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/xeno_config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+ARFLAGS = cru
+AM_V_AR = $(am__v_AR_@AM_V@)
+am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
+am__v_AR_0 = @echo "  AR      " $@;
+am__v_AR_1 = 
+libsigdebug_a_AR = $(AR) $(ARFLAGS)
+libsigdebug_a_LIBADD =
+am_libsigdebug_a_OBJECTS = libsigdebug_a-sigdebug.$(OBJEXT)
+libsigdebug_a_OBJECTS = $(am_libsigdebug_a_OBJECTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+       $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+       $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+       $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+       $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+       $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+       $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libsigdebug_a_SOURCES)
+DIST_SOURCES = $(libsigdebug_a_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+A2X = @A2X@
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+ASCIIDOC = @ASCIIDOC@
+ASCIIDODC = @ASCIIDODC@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_EXEEXT = @BUILD_EXEEXT@
+BUILD_OBJEXT = @BUILD_OBJEXT@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
+CHECKFLAGS = @CHECKFLAGS@
+CONFIG_STATUS_DEPENDENCIES = @CONFIG_STATUS_DEPENDENCIES@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@
+CPP_FOR_BUILD = @CPP_FOR_BUILD@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DOXYGEN_HAVE_DOT = @DOXYGEN_HAVE_DOT@
+DOXYGEN_SHOW_INCLUDE_FILES = @DOXYGEN_SHOW_INCLUDE_FILES@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FUSE_CFLAGS = @FUSE_CFLAGS@
+FUSE_LIBS = @FUSE_LIBS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LATEX_BATCHMODE = @LATEX_BATCHMODE@
+LATEX_MODE = @LATEX_MODE@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LD_FILE_OPTION = @LD_FILE_OPTION@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+W3M = @W3M@
+XENO_AUTOINIT_LDFLAGS = @XENO_AUTOINIT_LDFLAGS@
+XENO_BUILD_ARGS = @XENO_BUILD_ARGS@
+XENO_BUILD_STRING = @XENO_BUILD_STRING@
+XENO_COBALT_CFLAGS = @XENO_COBALT_CFLAGS@
+XENO_DEMO_DIR = @XENO_DEMO_DIR@
+XENO_DOC_GIT = @XENO_DOC_GIT@
+XENO_FUSE_CFLAGS = @XENO_FUSE_CFLAGS@
+XENO_HOST_STRING = @XENO_HOST_STRING@
+XENO_LIB_LDFLAGS = @XENO_LIB_LDFLAGS@
+XENO_POSIX_WRAPPERS = @XENO_POSIX_WRAPPERS@
+XENO_SYMBOL_PREFIX = @XENO_SYMBOL_PREFIX@
+XENO_TARGET_ARCH = @XENO_TARGET_ARCH@
+XENO_TARGET_CORE = @XENO_TARGET_CORE@
+XENO_TEST_DIR = @XENO_TEST_DIR@
+XENO_USER_APP_CFLAGS = @XENO_USER_APP_CFLAGS@
+XENO_USER_APP_LDFLAGS = @XENO_USER_APP_LDFLAGS@
+XENO_USER_CFLAGS = @XENO_USER_CFLAGS@
+XENO_USER_LDADD = @XENO_USER_LDADD@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CC_FOR_BUILD = @ac_ct_CC_FOR_BUILD@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sys_symbol_underscore = @sys_symbol_underscore@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+noinst_LIBRARIES = libsigdebug.a
+libsigdebug_a_SOURCES = sigdebug.c
+CCLD = $(top_srcdir)/scripts/wrap-link.sh $(CC)
+libsigdebug_a_CPPFLAGS = \
+       @XENO_USER_CFLAGS@      \
+       -I$(top_srcdir)/include
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  
$(am__configure_deps)
+       @for dep in $?; do \
+         case '$(am__configure_deps)' in \
+           *$$dep*) \
+             ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+               && { if test -f $@; then exit 0; else break; fi; }; \
+             exit 1;; \
+         esac; \
+       done; \
+       echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign 
testsuite/smokey/sigdebug/Makefile'; \
+       $(am__cd) $(top_srcdir) && \
+         $(AUTOMAKE) --foreign testsuite/smokey/sigdebug/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+       @case '$?' in \
+         *config.status*) \
+           cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+         *) \
+           echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ 
$(am__depfiles_maybe)'; \
+           cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ 
$(am__depfiles_maybe);; \
+       esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure 
$(CONFIG_STATUS_DEPENDENCIES)
+       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstLIBRARIES:
+       -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+libsigdebug.a: $(libsigdebug_a_OBJECTS) $(libsigdebug_a_DEPENDENCIES) 
$(EXTRA_libsigdebug_a_DEPENDENCIES) 
+       $(AM_V_at)-rm -f libsigdebug.a
+       $(AM_V_AR)$(libsigdebug_a_AR) libsigdebug.a $(libsigdebug_a_OBJECTS) 
$(libsigdebug_a_LIBADD)
+       $(AM_V_at)$(RANLIB) libsigdebug.a
+
+mostlyclean-compile:
+       -rm -f *.$(OBJEXT)
+
+distclean-compile:
+       -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ 
@am__quote@./$(DEPDIR)/libsigdebug_a-sigdebug.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@   $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF 
$(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@   $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='$<' object='$@' 
libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) 
$(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@   $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF 
$(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@   $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='$<' object='$@' 
libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) 
$(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@   $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF 
$(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@   $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='$<' object='$@' 
libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) 
$(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+libsigdebug_a-sigdebug.o: sigdebug.c
+@am__fastdepCC_TRUE@   $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) 
$(libsigdebug_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT 
libsigdebug_a-sigdebug.o -MD -MP -MF $(DEPDIR)/libsigdebug_a-sigdebug.Tpo -c -o 
libsigdebug_a-sigdebug.o `test -f 'sigdebug.c' || echo '$(srcdir)/'`sigdebug.c
+@am__fastdepCC_TRUE@   $(AM_V_at)$(am__mv) 
$(DEPDIR)/libsigdebug_a-sigdebug.Tpo $(DEPDIR)/libsigdebug_a-sigdebug.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='sigdebug.c' 
object='libsigdebug_a-sigdebug.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) 
$(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) 
$(INCLUDES) $(libsigdebug_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o 
libsigdebug_a-sigdebug.o `test -f 'sigdebug.c' || echo '$(srcdir)/'`sigdebug.c
+
+libsigdebug_a-sigdebug.obj: sigdebug.c
+@am__fastdepCC_TRUE@   $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) 
$(libsigdebug_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT 
libsigdebug_a-sigdebug.obj -MD -MP -MF $(DEPDIR)/libsigdebug_a-sigdebug.Tpo -c 
-o libsigdebug_a-sigdebug.obj `if test -f 'sigdebug.c'; then $(CYGPATH_W) 
'sigdebug.c'; else $(CYGPATH_W) '$(srcdir)/sigdebug.c'; fi`
+@am__fastdepCC_TRUE@   $(AM_V_at)$(am__mv) 
$(DEPDIR)/libsigdebug_a-sigdebug.Tpo $(DEPDIR)/libsigdebug_a-sigdebug.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='sigdebug.c' 
object='libsigdebug_a-sigdebug.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) 
$(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) 
$(INCLUDES) $(libsigdebug_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o 
libsigdebug_a-sigdebug.obj `if test -f 'sigdebug.c'; then $(CYGPATH_W) 
'sigdebug.c'; else $(CYGPATH_W) '$(srcdir)/sigdebug.c'; fi`
+
+mostlyclean-libtool:
+       -rm -f *.lo
+
+clean-libtool:
+       -rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+       $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+       set x; \
+       here=`pwd`; \
+       $(am__define_uniq_tagged_files); \
+       shift; \
+       if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+         test -n "$$unique" || unique=$$empty_fix; \
+         if test $$# -gt 0; then \
+           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+             "$$@" $$unique; \
+         else \
+           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+             $$unique; \
+         fi; \
+       fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+       $(am__define_uniq_tagged_files); \
+       test -z "$(CTAGS_ARGS)$$unique" \
+         || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+            $$unique
+
+GTAGS:
+       here=`$(am__cd) $(top_builddir) && pwd` \
+         && $(am__cd) $(top_srcdir) \
+         && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+       list='$(am__tagged_files)'; \
+       case "$(srcdir)" in \
+         [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+         *) sdir=$(subdir)/$(srcdir) ;; \
+       esac; \
+       for i in $$list; do \
+         if test -f "$$i"; then \
+           echo "$(subdir)/$$i"; \
+         else \
+           echo "$$sdir/$$i"; \
+         fi; \
+       done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+       -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+       @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+       topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+       list='$(DISTFILES)'; \
+         dist_files=`for file in $$list; do echo $$file; done | \
+         sed -e "s|^$$srcdirstrip/||;t" \
+             -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+       case $$dist_files in \
+         */*) $(MKDIR_P) `echo "$$dist_files" | \
+                          sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+                          sort -u` ;; \
+       esac; \
+       for file in $$dist_files; do \
+         if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+         if test -d $$d/$$file; then \
+           dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+           if test -d "$(distdir)/$$file"; then \
+             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx 
{} \;; \
+           fi; \
+           if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+             cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx 
{} \;; \
+           fi; \
+           cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+         else \
+           test -f "$(distdir)/$$file" \
+           || cp -p $$d/$$file "$(distdir)/$$file" \
+           || exit 1; \
+         fi; \
+       done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+       @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+       if test -z '$(STRIP)'; then \
+         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s 
\
+             install; \
+       else \
+         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s 
\
+           "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+       fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+       -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f 
$(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+       @echo "This command is intended for maintainers to use"
+       @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-noinstLIBRARIES \
+       mostlyclean-am
+
+distclean: distclean-am
+       -rm -rf ./$(DEPDIR)
+       -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+       distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+       -rm -rf ./$(DEPDIR)
+       -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+       mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+       clean-libtool clean-noinstLIBRARIES cscopelist-am ctags \
+       ctags-am distclean distclean-compile distclean-generic \
+       distclean-libtool distclean-tags distdir dvi dvi-am html \
+       html-am info info-am install install-am install-data \
+       install-data-am install-dvi install-dvi-am install-exec \
+       install-exec-am install-html install-html-am install-info \
+       install-info-am install-man install-pdf install-pdf-am \
+       install-ps install-ps-am install-strip installcheck \
+       installcheck-am installdirs maintainer-clean \
+       maintainer-clean-generic mostlyclean mostlyclean-compile \
+       mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+       tags tags-am uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/utils/Makefile.in b/utils/Makefile.in
index 384875e..19dedc6 100644
--- a/utils/Makefile.in
+++ b/utils/Makefile.in
@@ -148,7 +148,7 @@ am__define_uniq_tagged_files = \
   done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
-DIST_SUBDIRS = can analogy ps slackspot autotune
+DIST_SUBDIRS = analogy autotune can net ps slackspot
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 am__relativize = \
   dir0=`pwd`; \
@@ -343,7 +343,7 @@ target_vendor = @target_vendor@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-@XENO_COBALT_TRUE@SUBDIRS = can analogy ps slackspot autotune
+@XENO_COBALT_TRUE@SUBDIRS = analogy autotune can net ps slackspot
 all: all-recursive
 
 .SUFFIXES:
diff --git a/utils/net/Makefile.in b/utils/net/Makefile.in
new file mode 100644
index 0000000..4727f5c
--- /dev/null
+++ b/utils/net/Makefile.in
@@ -0,0 +1,845 @@
+# Makefile.in generated by automake 1.13.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \  ]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs  ]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+sbin_PROGRAMS = nomaccfg$(EXEEXT) rtcfg$(EXEEXT) rtifconfig$(EXEEXT) \
+       rtiwconfig$(EXEEXT) rtping$(EXEEXT) rtroute$(EXEEXT) \
+       tdmacfg$(EXEEXT)
+subdir = utils/net
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+       $(srcdir)/rtnet.in $(srcdir)/rtnet.conf.in \
+       $(top_srcdir)/config/depcomp $(dist_sysconf_DATA)
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/ac_prog_cc_for_build.m4 \
+       $(top_srcdir)/config/libtool.m4 \
+       $(top_srcdir)/config/ltoptions.m4 \
+       $(top_srcdir)/config/ltsugar.m4 \
+       $(top_srcdir)/config/ltversion.m4 \
+       $(top_srcdir)/config/lt~obsolete.m4 \
+       $(top_srcdir)/config/version-label $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+       $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/xeno_config.h
+CONFIG_CLEAN_FILES = rtnet rtnet.conf
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(sbindir)" \
+       "$(DESTDIR)$(sysconfdir)" "$(DESTDIR)$(sysconfdir)"
+PROGRAMS = $(sbin_PROGRAMS)
+nomaccfg_SOURCES = nomaccfg.c
+nomaccfg_OBJECTS = nomaccfg.$(OBJEXT)
+nomaccfg_LDADD = $(LDADD)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+rtcfg_SOURCES = rtcfg.c
+rtcfg_OBJECTS = rtcfg.$(OBJEXT)
+rtcfg_LDADD = $(LDADD)
+rtifconfig_SOURCES = rtifconfig.c
+rtifconfig_OBJECTS = rtifconfig.$(OBJEXT)
+rtifconfig_LDADD = $(LDADD)
+rtiwconfig_SOURCES = rtiwconfig.c
+rtiwconfig_OBJECTS = rtiwconfig.$(OBJEXT)
+rtiwconfig_LDADD = $(LDADD)
+rtping_SOURCES = rtping.c
+rtping_OBJECTS = rtping.$(OBJEXT)
+rtping_LDADD = $(LDADD)
+rtroute_SOURCES = rtroute.c
+rtroute_OBJECTS = rtroute.$(OBJEXT)
+rtroute_LDADD = $(LDADD)
+tdmacfg_SOURCES = tdmacfg.c
+tdmacfg_OBJECTS = tdmacfg.$(OBJEXT)
+tdmacfg_LDADD = $(LDADD)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+SCRIPTS = $(sbin_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+       $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+       $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+       $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+       $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+       $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+       $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = nomaccfg.c rtcfg.c rtifconfig.c rtiwconfig.c rtping.c \
+       rtroute.c tdmacfg.c
+DIST_SOURCES = nomaccfg.c rtcfg.c rtifconfig.c rtiwconfig.c rtping.c \
+       rtroute.c tdmacfg.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+DATA = $(dist_sysconf_DATA) $(nodist_sysconf_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+A2X = @A2X@
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+ASCIIDOC = @ASCIIDOC@
+ASCIIDODC = @ASCIIDODC@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_EXEEXT = @BUILD_EXEEXT@
+BUILD_OBJEXT = @BUILD_OBJEXT@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
+CHECKFLAGS = @CHECKFLAGS@
+CONFIG_STATUS_DEPENDENCIES = @CONFIG_STATUS_DEPENDENCIES@
+CPP = @CPP@
+CPPFLAGS = -I$(top_srcdir)/kernel/drivers/net/stack/include
+CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@
+CPP_FOR_BUILD = @CPP_FOR_BUILD@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DOXYGEN_HAVE_DOT = @DOXYGEN_HAVE_DOT@
+DOXYGEN_SHOW_INCLUDE_FILES = @DOXYGEN_SHOW_INCLUDE_FILES@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FUSE_CFLAGS = @FUSE_CFLAGS@
+FUSE_LIBS = @FUSE_LIBS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LATEX_BATCHMODE = @LATEX_BATCHMODE@
+LATEX_MODE = @LATEX_MODE@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LD_FILE_OPTION = @LD_FILE_OPTION@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+W3M = @W3M@
+XENO_AUTOINIT_LDFLAGS = @XENO_AUTOINIT_LDFLAGS@
+XENO_BUILD_ARGS = @XENO_BUILD_ARGS@
+XENO_BUILD_STRING = @XENO_BUILD_STRING@
+XENO_COBALT_CFLAGS = @XENO_COBALT_CFLAGS@
+XENO_DEMO_DIR = @XENO_DEMO_DIR@
+XENO_DOC_GIT = @XENO_DOC_GIT@
+XENO_FUSE_CFLAGS = @XENO_FUSE_CFLAGS@
+XENO_HOST_STRING = @XENO_HOST_STRING@
+XENO_LIB_LDFLAGS = @XENO_LIB_LDFLAGS@
+XENO_POSIX_WRAPPERS = @XENO_POSIX_WRAPPERS@
+XENO_SYMBOL_PREFIX = @XENO_SYMBOL_PREFIX@
+XENO_TARGET_ARCH = @XENO_TARGET_ARCH@
+XENO_TARGET_CORE = @XENO_TARGET_CORE@
+XENO_TEST_DIR = @XENO_TEST_DIR@
+XENO_USER_APP_CFLAGS = @XENO_USER_APP_CFLAGS@
+XENO_USER_APP_LDFLAGS = @XENO_USER_APP_LDFLAGS@
+XENO_USER_CFLAGS = @XENO_USER_CFLAGS@
+XENO_USER_LDADD = @XENO_USER_LDADD@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CC_FOR_BUILD = @ac_ct_CC_FOR_BUILD@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sys_symbol_underscore = @sys_symbol_underscore@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+nodist_sysconf_DATA = rtnet.conf
+dist_sysconf_DATA = tdma.conf
+sbin_SCRIPTS = rtnet
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  
$(am__configure_deps)
+       @for dep in $?; do \
+         case '$(am__configure_deps)' in \
+           *$$dep*) \
+             ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+               && { if test -f $@; then exit 0; else break; fi; }; \
+             exit 1;; \
+         esac; \
+       done; \
+       echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign utils/net/Makefile'; \
+       $(am__cd) $(top_srcdir) && \
+         $(AUTOMAKE) --foreign utils/net/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+       @case '$?' in \
+         *config.status*) \
+           cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+         *) \
+           echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ 
$(am__depfiles_maybe)'; \
+           cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ 
$(am__depfiles_maybe);; \
+       esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure 
$(CONFIG_STATUS_DEPENDENCIES)
+       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+rtnet: $(top_builddir)/config.status $(srcdir)/rtnet.in
+       cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+rtnet.conf: $(top_builddir)/config.status $(srcdir)/rtnet.conf.in
+       cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+       @$(NORMAL_INSTALL)
+       @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+       if test -n "$$list"; then \
+         echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+         $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+       fi; \
+       for p in $$list; do echo "$$p $$p"; done | \
+       sed 's/$(EXEEXT)$$//' | \
+       while read p p1; do if test -f $$p \
+        || test -f $$p1 \
+         ; then echo "$$p"; echo "$$p"; else :; fi; \
+       done | \
+       sed -e 'p;s,.*/,,;n;h' \
+           -e 's|.*|.|' \
+           -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+       sed 'N;N;N;s,\n, ,g' | \
+       $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+         { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+           if ($$2 == $$4) files[d] = files[d] " " $$1; \
+           else { print "f", $$3 "/" $$4, $$1; } } \
+         END { for (d in files) print "f", d, files[d] }' | \
+       while read type dir files; do \
+           if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+           test -z "$$files" || { \
+           echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) 
$(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files 
'$(DESTDIR)$(sbindir)$$dir'"; \
+           $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) 
$(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files 
"$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+           } \
+       ; done
+
+uninstall-sbinPROGRAMS:
+       @$(NORMAL_UNINSTALL)
+       @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+       files=`for p in $$list; do echo "$$p"; done | \
+         sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+             -e 's/$$/$(EXEEXT)/' \
+       `; \
+       test -n "$$list" || exit 0; \
+       echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+       cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+
+clean-sbinPROGRAMS:
+       @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+       echo " rm -f" $$list; \
+       rm -f $$list || exit $$?; \
+       test -n "$(EXEEXT)" || exit 0; \
+       list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+       echo " rm -f" $$list; \
+       rm -f $$list
+
+nomaccfg$(EXEEXT): $(nomaccfg_OBJECTS) $(nomaccfg_DEPENDENCIES) 
$(EXTRA_nomaccfg_DEPENDENCIES) 
+       @rm -f nomaccfg$(EXEEXT)
+       $(AM_V_CCLD)$(LINK) $(nomaccfg_OBJECTS) $(nomaccfg_LDADD) $(LIBS)
+
+rtcfg$(EXEEXT): $(rtcfg_OBJECTS) $(rtcfg_DEPENDENCIES) 
$(EXTRA_rtcfg_DEPENDENCIES) 
+       @rm -f rtcfg$(EXEEXT)
+       $(AM_V_CCLD)$(LINK) $(rtcfg_OBJECTS) $(rtcfg_LDADD) $(LIBS)
+
+rtifconfig$(EXEEXT): $(rtifconfig_OBJECTS) $(rtifconfig_DEPENDENCIES) 
$(EXTRA_rtifconfig_DEPENDENCIES) 
+       @rm -f rtifconfig$(EXEEXT)
+       $(AM_V_CCLD)$(LINK) $(rtifconfig_OBJECTS) $(rtifconfig_LDADD) $(LIBS)
+
+rtiwconfig$(EXEEXT): $(rtiwconfig_OBJECTS) $(rtiwconfig_DEPENDENCIES) 
$(EXTRA_rtiwconfig_DEPENDENCIES) 
+       @rm -f rtiwconfig$(EXEEXT)
+       $(AM_V_CCLD)$(LINK) $(rtiwconfig_OBJECTS) $(rtiwconfig_LDADD) $(LIBS)
+
+rtping$(EXEEXT): $(rtping_OBJECTS) $(rtping_DEPENDENCIES) 
$(EXTRA_rtping_DEPENDENCIES) 
+       @rm -f rtping$(EXEEXT)
+       $(AM_V_CCLD)$(LINK) $(rtping_OBJECTS) $(rtping_LDADD) $(LIBS)
+
+rtroute$(EXEEXT): $(rtroute_OBJECTS) $(rtroute_DEPENDENCIES) 
$(EXTRA_rtroute_DEPENDENCIES) 
+       @rm -f rtroute$(EXEEXT)
+       $(AM_V_CCLD)$(LINK) $(rtroute_OBJECTS) $(rtroute_LDADD) $(LIBS)
+
+tdmacfg$(EXEEXT): $(tdmacfg_OBJECTS) $(tdmacfg_DEPENDENCIES) 
$(EXTRA_tdmacfg_DEPENDENCIES) 
+       @rm -f tdmacfg$(EXEEXT)
+       $(AM_V_CCLD)$(LINK) $(tdmacfg_OBJECTS) $(tdmacfg_LDADD) $(LIBS)
+install-sbinSCRIPTS: $(sbin_SCRIPTS)
+       @$(NORMAL_INSTALL)
+       @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
+       if test -n "$$list"; then \
+         echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+         $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+       fi; \
+       for p in $$list; do \
+         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+         if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+       done | \
+       sed -e 'p;s,.*/,,;n' \
+           -e 'h;s|.*|.|' \
+           -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+       $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+         { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+           if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+             if (++n[d] == $(am__install_max)) { \
+               print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+           else { print "f", d "/" $$4, $$1 } } \
+         END { for (d in files) print "f", d, files[d] }' | \
+       while read type dir files; do \
+            if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+            test -z "$$files" || { \
+              echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+              $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit 
$$?; \
+            } \
+       ; done
+
+uninstall-sbinSCRIPTS:
+       @$(NORMAL_UNINSTALL)
+       @list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
+       files=`for p in $$list; do echo "$$p"; done | \
+              sed -e 's,.*/,,;$(transform)'`; \
+       dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-compile:
+       -rm -f *.$(OBJEXT)
+
+distclean-compile:
+       -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nomaccfg.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rtcfg.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rtifconfig.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rtiwconfig.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rtping.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rtroute.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tdmacfg.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@   $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF 
$(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@   $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='$<' object='$@' 
libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) 
$(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@   $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF 
$(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@   $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='$<' object='$@' 
libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) 
$(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@   $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF 
$(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@   $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='$<' object='$@' 
libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) 
$(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+       -rm -f *.lo
+
+clean-libtool:
+       -rm -rf .libs _libs
+install-dist_sysconfDATA: $(dist_sysconf_DATA)
+       @$(NORMAL_INSTALL)
+       @list='$(dist_sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
+       if test -n "$$list"; then \
+         echo " $(MKDIR_P) '$(DESTDIR)$(sysconfdir)'"; \
+         $(MKDIR_P) "$(DESTDIR)$(sysconfdir)" || exit 1; \
+       fi; \
+       for p in $$list; do \
+         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+         echo "$$d$$p"; \
+       done | $(am__base_list) | \
+       while read files; do \
+         echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sysconfdir)'"; \
+         $(INSTALL_DATA) $$files "$(DESTDIR)$(sysconfdir)" || exit $$?; \
+       done
+
+uninstall-dist_sysconfDATA:
+       @$(NORMAL_UNINSTALL)
+       @list='$(dist_sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
+       files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+       dir='$(DESTDIR)$(sysconfdir)'; $(am__uninstall_files_from_dir)
+install-nodist_sysconfDATA: $(nodist_sysconf_DATA)
+       @$(NORMAL_INSTALL)
+       @list='$(nodist_sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
+       if test -n "$$list"; then \
+         echo " $(MKDIR_P) '$(DESTDIR)$(sysconfdir)'"; \
+         $(MKDIR_P) "$(DESTDIR)$(sysconfdir)" || exit 1; \
+       fi; \
+       for p in $$list; do \
+         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+         echo "$$d$$p"; \
+       done | $(am__base_list) | \
+       while read files; do \
+         echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sysconfdir)'"; \
+         $(INSTALL_DATA) $$files "$(DESTDIR)$(sysconfdir)" || exit $$?; \
+       done
+
+uninstall-nodist_sysconfDATA:
+       @$(NORMAL_UNINSTALL)
+       @list='$(nodist_sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
+       files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+       dir='$(DESTDIR)$(sysconfdir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+       $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+       set x; \
+       here=`pwd`; \
+       $(am__define_uniq_tagged_files); \
+       shift; \
+       if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+         test -n "$$unique" || unique=$$empty_fix; \
+         if test $$# -gt 0; then \
+           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+             "$$@" $$unique; \
+         else \
+           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+             $$unique; \
+         fi; \
+       fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+       $(am__define_uniq_tagged_files); \
+       test -z "$(CTAGS_ARGS)$$unique" \
+         || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+            $$unique
+
+GTAGS:
+       here=`$(am__cd) $(top_builddir) && pwd` \
+         && $(am__cd) $(top_srcdir) \
+         && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+       list='$(am__tagged_files)'; \
+       case "$(srcdir)" in \
+         [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+         *) sdir=$(subdir)/$(srcdir) ;; \
+       esac; \
+       for i in $$list; do \
+         if test -f "$$i"; then \
+           echo "$(subdir)/$$i"; \
+         else \
+           echo "$$sdir/$$i"; \
+         fi; \
+       done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+       -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+       @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+       topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+       list='$(DISTFILES)'; \
+         dist_files=`for file in $$list; do echo $$file; done | \
+         sed -e "s|^$$srcdirstrip/||;t" \
+             -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+       case $$dist_files in \
+         */*) $(MKDIR_P) `echo "$$dist_files" | \
+                          sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+                          sort -u` ;; \
+       esac; \
+       for file in $$dist_files; do \
+         if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+         if test -d $$d/$$file; then \
+           dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+           if test -d "$(distdir)/$$file"; then \
+             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx 
{} \;; \
+           fi; \
+           if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+             cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx 
{} \;; \
+           fi; \
+           cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+         else \
+           test -f "$(distdir)/$$file" \
+           || cp -p $$d/$$file "$(distdir)/$$file" \
+           || exit 1; \
+         fi; \
+       done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(DATA)
+installdirs:
+       for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(sbindir)" 
"$(DESTDIR)$(sysconfdir)" "$(DESTDIR)$(sysconfdir)"; do \
+         test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+       done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+       @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+       if test -z '$(STRIP)'; then \
+         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s 
\
+             install; \
+       else \
+         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s 
\
+           "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+       fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+       -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f 
$(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+       @echo "This command is intended for maintainers to use"
+       @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
+       mostlyclean-am
+
+distclean: distclean-am
+       -rm -rf ./$(DEPDIR)
+       -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+       distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-dist_sysconfDATA install-nodist_sysconfDATA \
+       install-sbinPROGRAMS install-sbinSCRIPTS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+       -rm -rf ./$(DEPDIR)
+       -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+       mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-dist_sysconfDATA uninstall-nodist_sysconfDATA \
+       uninstall-sbinPROGRAMS uninstall-sbinSCRIPTS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+       clean-libtool clean-sbinPROGRAMS cscopelist-am ctags ctags-am \
+       distclean distclean-compile distclean-generic \
+       distclean-libtool distclean-tags distdir dvi dvi-am html \
+       html-am info info-am install install-am install-data \
+       install-data-am install-dist_sysconfDATA install-dvi \
+       install-dvi-am install-exec install-exec-am install-html \
+       install-html-am install-info install-info-am install-man \
+       install-nodist_sysconfDATA install-pdf install-pdf-am \
+       install-ps install-ps-am install-sbinPROGRAMS \
+       install-sbinSCRIPTS install-strip installcheck installcheck-am \
+       installdirs maintainer-clean maintainer-clean-generic \
+       mostlyclean mostlyclean-compile mostlyclean-generic \
+       mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+       uninstall-am uninstall-dist_sysconfDATA \
+       uninstall-nodist_sysconfDATA uninstall-sbinPROGRAMS \
+       uninstall-sbinSCRIPTS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:


_______________________________________________
Xenomai-git mailing list
Xenomai-git@xenomai.org
http://www.xenomai.org/mailman/listinfo/xenomai-git

Reply via email to