Nathan Lauener wrote: > Jan Kiszka wrote: > >> Lauener Nathan wrote: >> >> >>> Hi, I am using Xenomai to read data from different sensors in real >>> time from >>> user space. So far I am reading position data from a device attached to >>> a serial port. The CPU load is at about 1%. I also have a >>> microcontroller attached via USB to read encoder data. The USB device is >>> a USB-to-serial converter. As soon as I open the (USB-)serial port with >>> normal systemcalls and read the incoming data my CPU load skyrockets to >>> over 90%. I only read about 30 bytes every 100ms. >>> I ran the application on a much newer computer also to rule out any >>> buggy hardware. The results stayed the same. Intensively searching the >>> mailing list and provided documentation have not helped solve the >>> problem. I'm using Xenomai 2.1.0 with kernel 2.6.15.6. Xenomai is >>> compiled into >>> the kernel. I also use the driver xeno_16550A loaded as module. The >>> USB-to-serial bridge used is a CP2101 from Silabs. >> >> Is there any IRQ conflict between the USB host controller and some >> RT-device? Please check /proc/interrupts and /proc/xenomai/irq. >> >> > There is no conflict (interrupt 0 (timer) is the only interrupt > mentioned in both listings).
Ok, just to exclude this. > >> Which process is consuming your CPU time? At system or at user level? >> >> > It seems that the system consumes the CPU time. Here are the first few > lines from opreport > > CPU: CPU with timer interrupt, speed 0 MHz (estimated) > Profiling through timer interrupt > samples % image name app name > symbol name > 1733 31.9742 vmlinux vmlinux > default_idle > 1151 21.2362 vmlinux vmlinux > __ipipe_trace > 601 11.0886 libqt-mt.so.3.3.3 libqt-mt.so.3.3.3 (no > symbols) > 528 9.7417 libc-2.3.2.so libc-2.3.2.so (no > symbols) > 305 5.6273 vmlinux vmlinux > __ipipe_unstall_root > 184 3.3948 vmlinux vmlinux > __ipipe_dispatch_event > 122 2.2509 anon (tgid:4322 range:0x81fb000-0x89b2000) > Xorg (no symbols) > 100 1.8450 libstdc++.so.5.0.7 libstdc++.so.5.0.7 (no > symbols) > 97 1.7897 vmlinux vmlinux mcount > > It looks like the systems gets stuck on the idle task. I do not know > what __ipipe_trace exactly does. __ipipe_trace belongs to the ipipe-tracer you seem to have patched into your system. It's called on EVERY kernel function's entry, so it should show up on higher ranks. Disable the tracer first to get a more consistent profile. > >> Jan >> >> >> > In my current design I acquire and process the data in the same programm > using the Xenomai native skin from user space. This means I link the > Xenomai-native and rtdm libraries with several graphics and mathematical > libraries. Could this lead to conflicts or problems with Xenomai? Should not, we do the same here (e.g. with opencv). Anyway, reducing your scenario to the minimum that still performs badly can help to identify the reason. Jan
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
