Dear Xenomai users/developers, I want to measure external interrupt latencies. Therefore, I have a parallel port loopback connector (25 pins). Pin 9 (D7) and Pin 10 (ACK) are connected. I would like to trigger an interrupt via Pin 9 and measure the time till the ISR is entered.
Can somebody give me a hint how to start writing such an application. I read something about RTDM and I also had a look on the IRQ-Loop testsuite. I am wondering whether I can reuse some of this code which is written there. Besides, is it really necessary to use the RTDM framework? Sorry, but I am really new to Xenomai. I just want to have some small hints how to start developing. Thanks in advance, Markus Franke
begin:vcard fn:Markus Franke n:Franke;Markus adr;quoted-printable:;;Vettersstra=C3=9Fe 64/722;Chemnitz;Saxony;09126;Germany email;internet:[EMAIL PROTECTED] x-mozilla-html:FALSE url:http://www.tu-chemnitz.de/~franm version:2.1 end:vcard
_______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
