I am about to begin to use Xenomai on a dual-core x86_64 box.
I installed FC6 i386 (32bits) since the adeos patch for x86_64 was not there when I did the install, I may go back to run xenomai on x86_64 since I install both systems (x86_64 and i386) Nevertheless I have three 32bits kernels 2.6.19-vanilla (pure kernel.org kernel) 2.6.20-rc1-rtXX (precompiled from Ingo Molnar) 2.6.19-xenomai (vanilla + adeos-ipipe-2.6.19-i386-1.6-03.patch) The box has 3 ethernet interface (2 on-board + 1 on an additionnal NIC) eth0 is the additionnal NIC eth1,eth2 the on-board I/F eth1 used for corporate LAN eth0 "should" be used for private network (only 2 machines for now) With this config the machine boots properly with the non-xenomai kernels with eth1 and eth0 up and running. If I boot the xenomai kernel the machine hangs (even sysrq does not help) as soon as the system tries to ifup eth0. If I disable eth0 the xenomai kernel boots until the end. If I try to ifup eth0 "manually" afterward I got the same "hang". I have no log and sysrq does not work !! How would you suggest me to investigate that problem? -- Erk _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
