On 2/12/07, Jan Kiszka <[EMAIL PROTECTED]> wrote:
vikesh rambaran wrote: > Hi there > > I'm using ubuntu 6.06 LTS. > I patched a 2.6.19.1 vanilla kernel with xenomai 2.3.0 adeos > (Processor type is Pentuim III) > The realtime section has been left at the default settings. > > The kernel compiles and boots ok. > > Userspace Xenomai has been compiled with the --disable-x86-tsc option > > When i try to run the latency test, i get the following error > > Xenomai: native skin or CONFIG_XENO_OPT_PERVASIVE disabled > (modprobe xeno_native?) > > The kernel .config file shows that the native skin is supposed to be > compiled > into the kernel and CONFIG_SENO_OPT_PERVASIVE=y > > Any help to solve this problem would be appreciated I bet you are still running your old kernel... Anyway, check the boot messages and the content of /proc/xenomai, specifically .../interfaces. Jan
Hi Thanx for the reply uname -al shows that the kernel is the patched kernel (2.6.19.1). Ubuntu's kernel is 2.6.15 Xenomai is failing to load because of the APIC Passing lapic=1 as a boot parameter causes a kernel panic Going to try recompiling with APIC disabled (if it is) Keep well Vicki
_______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
