Hi,
I'm trying to get realtime communication over the serial port to work
using the example found here
http://www.captain.at/xenomai-serial-port-example.php
I compiled a 2.6.20-6 kernel with xenomai-2.3.1 and configure the
realtime serial driver to be a loadable module. I disabled the default
linux serial driver using 'setserial'. However, when I run
modprobe xeno_16550A ioaddr=0x3f8 irq=4
or
insmod ./xeno16550A.ko ioaddr=0x3f8 irq=4
no rtser<N> nodes turn up in /dev. No errors are generated when I
insert the module and an lsmod reveals it is in. Have I missed
something? Thanks.
-Brandt
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
