Hello everyone,
i thought that it would be better if i started a new thread for this: I have some trouble with getting xenomai to run on a PC/104 device with AMD Geode GX processor (Debian 4.0 is installed). My development platform which is running a Athlon64 (with Kubuntu 6.06) is already doing fine. For testing purposes i tried using the same kernel-bulid (2.6.20.11 kernel with 2.3.1 xenomai) for both by selecting a 486-processor in the menuconfig. It works on my Athlon64 but on the PC/104 after copying the files i cannot boot. On the first boot it said directly that xenomai failed to load (and all the RT-interfaces after that).. all with errorcode -19. I am not able to reproduce that output, though. After that i turned off APIC to see if it changes something and then i got further in the boot process but now stopping with: /bin/dash: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory Now it does not seem to change anything whether the ,noapic' parameter is passed to the kernel or not, though. This is all kind of strange, because i already had xenomai running successfully on that platform, but i am not able to get it running again.. (in other kernel building attempts the system booted but xenomai was not loaded (in /proc was no xenomai folder) and yes.. i did boot the right kernel). The PC/104 has a 500Mhz AMD Geode GX processor and 512MB Ram. It uses a 1GB Flashdisk that is plugged in via the IDE port (shows up as hda). To build the xenomai-kernel i modified the config from the running Debian 4.0 system. Could a problem stem from the fact that i copied the files to that machine and did not build them on the same machine? I really hope someone can help me with this.. Thanks in advance! Jonas
_______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
