Jan Kiszka wrote: > Wolfgang Grandegger wrote: >> Jan Kiszka wrote: >>> Perrine Martignoni wrote: >>>>> Perrine, did you happen to configure Xenomai with "configure --host=arm >>>>> ..."? If yes (see config.log), please use "--host=arm-linux". This >>>>> solved all issues for me. >>>>> >>>>> Awaiting your feedback! >>>> I configure Xenomai with --host=arm. >>>> I tried to configure like this but it doesn't work : >>>> >>>> ./configure --build=arm-linux --host=arm-linux CC=arm-linux-gcc >>> ^^^^^^^^^ >>> I guess you are not compiling Xenomai _on_ an ARM box, are you? :) >>> Try --build=i686-linux here. >> Or just omit it. Also CC=, CXX=, LD= ist not necessary. For PowerPC with >> the ELDK, I just use >> >> ./configure --host=ppc-linux >> >> to configure Xenomai. > > Can we define a common ground for this in README.INSTALL, for all archs? > The simpler, the better.
The above works for the ELDK, because the tools ppc-linux-xxx are available in the binary path (via PATH), but this might not be true for other tool-chains. And this method also does not work with RTnet, IIRC. So far, I didn't realize any difference between the configuration methods ... > I was heavily misled by the PPC section, because I do not cross-compile > everyday, thus had to look up the procedure again and managed to pick > the bad example... ... but there might be some quirk with ARM and uClibc tool chains of the ELDK. Wolfgang. _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
