Hello,
Selon Gilles Chanteperdrix <[EMAIL PROTECTED]>:
> On 10/29/07, garryt <[EMAIL PROTECTED]> wrote:
> > Hello all,
> >
> > I had time to try again adeos+xenomai on a imx1 board. (i know this is
> quite
> > old).
>
> Thanks. The imx port should be integrated in the next I-pipe patch.
>
> >
> > This looks stable, i have been testing for several hours.
> >
> > I have followed the wiki documentation and performed some tests with
> xeno-test +
> > ping flooding on this board, again i have no other *similar* board to
> compare
> > results with, but here they are.
> >
> > I wonder if the difference between user-mode and in-kernel mode should be
> as
> > much as this...
>
> From the tests I have seen so far, except those published by Adeneo,
> there is always a great difference between user-mode an kernel-mode.
> This is the price to pay for the comfort of user-space on ARM.
>
> >
> > By the way enabling ipipe tracer increase response time by a factor 2! is
> this
> > ok with such HW ?
>
> I guess so.
>
> >
> > I have attached the patch if someone is interested in, any remarks
> regarding
> > this are welcome.
>
> There is something suspicious, it is the loop:
>
> do {
> write_seqlock(&xtime_lock);
> timer_tick();
> +#ifdef CONFIG_IPIPE
> + last_jiffy_time += LATCH;
> +#endif /* CONFIG_IPIPE */
> write_sequnlock(&xtime_lock);
> IMX_TCMP(TIMER_BASE) += evt_diff;
> } while (unlikely((int32_t) (IMX_TCMP(TIMER_BASE)
> - IMX_TCN(TIMER_BASE)) < 0));
>
> First, you should not touch IMX_TCMP(TIMER_BASE) in the loop, this is
> done by __ipipe_mach_set_dec.
>
> Second, with the current version of the I-pipe, the do/while loop
> should be disabled when CONFIG_IPIPE is enabled. However, this is
> going to change in the next version of I-pipe because of the so-called
> "flat log" optimization, but I think IMX_TCMP(TIMER_BASE) should be
> replaced with last_jiffy_time, because IMX_TCMP(TIMER_BASE) is the
> date of the previous hardware timer tick, but the previous hardware
> timer tick is not necessarily Linux timer previous tick. Anyway, I
> will try and fix this and send a patch for testing.
>
Please correct me if i am wrong, this will help, my understanding from the
comment in the function (in 1.7-06.patch), was that if another domain (xenomai)
has stolen the timer we should do nothing neither ack it (already done), nor
reprogram the timer in linux interrupt handler...just run timer_tick. (should i
used time_lock)
I though that if we enter the loop this means that the timer programming is
still held by linux not xenomai.
> >
> >
> > All tests have been performed with xeno-test + ping flooding the board.
>
> For a load that give worse figures, run the calibrator
> http://www.cwi.nl/~manegold/Calibrator
>
>
> --
> Gilles Chanteperdrix
>
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
