Hi All, this is my first try to run a x86_64 kernel with Xenomai 2.4rc5 with my Core 2 Extreme, but I got this message... :(
Anybody can help? My config file is attached.
Thank you
Giammarco
Linux version 2.6.22.12 ([EMAIL PROTECTED]) (gcc version 4.1.2 (Gentoo 4.1.2 p17
Command line: root=/dev/sda6 console=ttyS0,38400
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000099000 (usable)
BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffc6300 (usable)
BIOS-e820: 00000000cffc6300 - 00000000d0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
end_pfn_map = 1245184
DMI 2.4 present.
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1245184
early_node_map[3] active PFN ranges
0: 0 -> 153
0: 256 -> 851910
0: 1048576 -> 1245184
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: COMPAQ MPTABLE: Product ID: Workstation MPTABLE: APIC at: 00
Processor #0 (Bootup-CPU)
Processor #1
Processor #2
Processor #3
I/O APIC #1 at 0xFEC00000.
Setting APIC routing to flat
Processors: 4
Allocating PCI resources starting at d2000000 (gap: d0000000:20000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 83560 bytes of per cpu data
Built 1 zonelists. Total pages: 1030095
Kernel command line: root=/dev/sda6 console=ttyS0,38400
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2666.822 MHz processor.
I-pipe 1.2-05: pipeline enabled.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x5940000 - 0x9940000
Memory: 4047392k/4980736k available (2258k kernel code, 146116k reserved, 1259k)
Calibrating delay using timer specific routine.. 5335.03 BogoMIPS (lpj=2667519)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
[<0000000000000000>]
PGD 0
Oops: 0010 [1] PREEMPT SMP
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.22.12 #1
RIP: 0010:[<0000000000000000>] [<0000000000000000>]
RSP: 0000:ffffffff8060af40 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffffffff805b83c0 RSI: ffffffff80572b40 RDI: 0000000000000000
RBP: ffffffff80572b40 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff81012fc61d48 R14: ffffffff806a38c8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff80570000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000000201000 CR4: 00000000000006e0
Process swapper (pid: 1, threadinfo ffff81012fc60000, task ffff81012fc5f4b0)
Stack: ffffffff8024e40e ffffffff8060af48 0000000000000000 ffffffff806a38c0
ffffffff80214132 ffffffff80572890 ffffffff802142a0 0000000000000000
0000000000000008 ffff81012fc61d70 00000000ffffffff 00000000ffffffff
Call Trace:
<IRQ> [<ffffffff8024e40e>] __ipipe_ack_level_irq+0x20/0x30
[<ffffffff80214132>] __ipipe_ack_irq+0x1a/0x21
[<ffffffff802142a0>] __ipipe_handle_irq+0x10e/0x210
[<ffffffff802099e1>] common_interrupt+0x61/0x7d
<EOI> [<ffffffff80313a7b>] __delay+0x6/0x10
[<ffffffff805cfbc8>] timer_irq_works+0x24/0x42
[<ffffffff805d0218>] setup_IO_APIC+0x632/0x8ef
[<ffffffff8042f006>] _spin_unlock_irqrestore+0x28/0x43
[<ffffffff80228486>] set_cpus_allowed+0xa2/0xaf
[<ffffffff805ceb3e>] smp_prepare_cpus+0x31b/0x34e
[<ffffffff805c650c>] kernel_init+0x65/0x2fe
[<ffffffff8042ef2c>] _spin_unlock_irq+0x19/0x34
[<ffffffff8020a308>] child_rip+0xa/0x12
[<ffffffff80434b63>] _etext+0x0/0x405d
[<ffffffff805c64a7>] kernel_init+0x0/0x2fe
[<ffffffff8020a2fe>] child_rip+0x0/0x12
Code: Bad RIP value.
RIP [<0000000000000000>]
RSP <ffffffff8060af40>
CR2: 0000000000000000
Kernel panic - not syncing: Attempted to kill init!
.config
Description: Binary data
_______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
