Hi We are using Linux 2.6.19.2 and Xenomai 2.3.0
The problem disapeared when we not changed the baudrate (we try to scan the bus..). What shoult be the time between changing the baudrate? Thank's Urs From: Wolfgang Grandegger [EMAIL PROTECTED] Sent: Wednesday, April 09, 2008 12:19 AM To: Urs Eichholzer Cc: [email protected] Subject: Re: [Xenomai-help] CAN Probleme Hi Urs, Urs Eichholzer wrote: > Hello > > We are just start to use the setup... > We try to read parameters from a device true the CAN. From some > parameters we get proper replay and with other parameters we get the > following message: > rtcan0: btr0=0x05 btr1=0x4f > rtcan0: btr0=0x0a btr1=0x6f > rtcan_mscan_start_xmit: TX buffer not empty Hm, this message is pretty fatal. What version of Linux and Xenomai do you use? What type of parameters do you read when the error message shows up. Can you reproduce the problem with a little example program? Thanks, ---------------------------------------------------------------- This message was sent using Samart Web Mail 2005. _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
