I'm trying to bring xenomai up on an Freescale mpc836x_mds board. I'm
using the ipipe-2.6.24-powerpc-2.1-02 branch of the git tree at Denx.
The kernel boots fine with ipipe disabled, nfs root mounting its file
system. But as soon as I enable ipipe in the kernel I get..
...
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
IP-Config: Complete:
device=eth0, addr=10.128.10.234, mask=255.0.0.0, gw=10.128.0.253,
host=10.128.10.234, domain=, nis-domain=(none),
bootserver=10.128.10.10, rootserver=10.128.10.10, rootpath=
Looking up port of RPC 100003/2 on 10.128.10.10
irq 33, desc: c02746c0, depth: 0, count: 0, unhandled: 0
irq 33, desc: c02746c0, depth: 0, count: 0, unhandled: 0
And it hangs. Since this is the place where the kernel usually finds
its PHY, I might suspect its an issue with that..
I'm currently trying to get Denx's 2.6.20 branch running but its
freezing after loading the device tree, so I have some issues there.
Can anyone having success with this board report what kernel they are using?
Thanks
--
Michael Galea
30 Whitmore Road
Woodbridge, Ontario, Canada, L4L 7Z4
Ph: (905) 266-1745
Fx: (905) 856-1995
www.ruggedcom.com
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
