I've noticed the same erroneous behavior when CONFIG_XENO_HW_FPU is enabled and when it is disabled. I don't know if this information is relevant or not. Is this expected behavior?
Mark Saiia On Tue, Nov 4, 2008 at 7:38 AM, Steven Seeger < [EMAIL PROTECTED]> wrote: > Hi Gilles. Please let me know if this is ok. This is the datasheet for > the part. > > Steven > > > > > -----Original Message----- > > From: Gilles Chanteperdrix [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, November 04, 2008 2:55 AM > > To: Mark Saiia > > Cc: Steven Seeger; [email protected] > > Subject: Re: [Xenomai-help] fpu context switch issue > > > > Mark Saiia wrote: > > > Hello, > > > > > > The switchtest output is as follows. This was run on 2.4.5 with > > 2.6.26.3 > > > AMD Geode LX800 board. > > > In order to get it to run, I had to remove modprobe xeno_native from > > my > > > start-up script. I don't know if that is an expected requirement > > prior to > > > running the test. > > > > Just to understand what I am doing, would you, or anybody else, have a > > datasheet from AMD with the details of Geode FPU handling ? > > > > -- > > Gilles. >
_______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
