hi. I'm also work with EtherCAT master, Xenomai, Rtnet can you explain more detail about your timer measuring ? + the time between send and receive EtherCAT packet about 19us ( it depend on Slaves processtime ), i use Wireshark wit RTnet plugin to capture packets
Luan Dinh --- On Tue, 5/5/09, [email protected] <[email protected]> wrote: From: [email protected] <[email protected]> Subject: [Xenomai-help] help with xenomai configuration To: [email protected] Date: Tuesday, May 5, 2009, 2:21 PM Hi, I use a KUbuntu 8.10 with kernel 2.6.27.7, xenomai 2.4.6.1 and the latest rtnet version. I set up the EthercatMasterLibrary and send some Frames (size of ~1200 byte) cylical to my Beckhoff devices. Measuring the time (via rt_read_timer-function of timer.h) handing the frames over to the NIC last between 5 and 10 us. (its the low_level_send) Measuring the time at the application layer is takes ~250 - 350 us. So I am loosing quite a lot time in between. Maybe there is sth. wrong with my xenomai configuration. I run the 'xeno-test' (results below) but the test stop at generation load. Henning
_______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
