On 10/11/2010 09:10 PM, Gilles Chanteperdrix wrote: > Peter Pastor wrote: >> Hey Gilles, >> >> Thanks for the hint. I "fixed" this problem by loading the nvidia driver >> (instead of nv) as default. Now the graphic cards uses IRQ 24 which does not >> collide with IRQ 11 of the CAN bus card (see attached lspci.txt). >> >> The only other device that uses IRQ 11 is >> # 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port >> [8086:3406] (rev 13) >> >> But I guess that is ok, is it ? I checked the FAQs and went through the list >> but I feel I can't do much. I will try a few things and disable everything >> that is unneeded. The FAQ list also suggests to enable CONFIG_PCI_MSI which >> is disabled right now. What would now be a reasonable thing to do ? > > Keep PCI_MSI disabled. The FAQ is wrong and should be fixed. > >> >> How can I find out and about which device is causing the address space >> collision ? >> >> # address space collision: host bridge window [mem 0xd7f00000-0xe0000000] >> conflicts with PCI Bus 0000:00 [mem 0xe0000000-0xf7ffffff] >> >> I attached the syslog of the latest boot. I enabled some debugging infos >> which hopefully allow to trace down the problem. Interestingly, this time, >> the kernel spit out >> >> # RT-Socket-CAN 0.90.2 - (C) 2006 RT-Socket-CAN Development Team >> >> right before it froze. > > You should try and put some printks in RTCan code to see how far it > goes. But I guess Wolfgang may be of more help.
Well, normally messages like: RTCAN SJA1000 driver initialized PEAK-PCI-CAN: initializing device 001c:0001 PEAK-PCI-CAN: base_addr=c907c000 conf_addr=c907a000 irq=16 rtcan: registered rtcan0 PEAK-PCI-CAN: base_addr=c907e400 conf_addr=c907a000 irq=16 rtcan: registered rtcan1 should follow. I would add printk's into peak_pci_init_one() and rtcan_peak_pci_add_chan() in ksrc/drivers/can/sja1000/rtcan_peak_pci.c. Did you compile the SJA1000 driver's into the kernel? Try building modules, which you then can load manually. BTW: what PEAK PCI card are you using? Wolfgang. _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
