François Beaufort wrote:
> I can't show you /proc/interrupts when ipu and I-pipe are enabled
> because the system doesn't start in this case.
Ok. I failed to get that from your first mail. I do not know either if
you are using a vanilla kernel, or a patched one?
If a patched one, then you have to verify that generic_handle_irq is
replaced with ipipe_handle_chained_irq for multiplexed GPIO irqs.
Note that I CCd the Xenomai-help mailing list, next private mail will
receive no answer.
--
Gilles.
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
