On 06/21/2011 03:11 PM, suresh reddy wrote:
> Dear all,
>
>
> i have downloaded ipipe patched kernel from xenomai git .and applied the
> patches to the xenomai 2.5.6 sources as mentioned .
>
> make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- O=../build
> omap2plus_defconfig
> make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- O=../build menuconfig
>
> i just removed all the other boards from TI except Pandaboard. I did not
> touched any other options.
>
> then I run the command
>
> make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- O=../build uImage
>
> then it giving me the error as below
>
> /home/balijepalli/omap4/ipipe-gch/arch/arm/kernel/entry-armv.S: Assembler
> messages:
> /home/balijepalli/omap4/ipipe-gch/arch/arm/kernel/entry-armv.S:1407: Error:
> undefined symbol `.L99973' in operation setting `up_b_offset'
> /home/balijepalli/omap4/ipipe-gch/arch/arm/kernel/entry-armv.S:1407: Error:
> undefined symbol `.L99973' in operation setting `up_b_offset'
> /home/balijepalli/omap4/ipipe-gch/arch/arm/kernel/entry-armv.S:1407: Error:
> local label `"9997" (instance number 3 of a fb label)' is not defined
> make[2]: *** [arch/arm/kernel/entry-armv.o] Error 1
> make[1]: *** [arch/arm/kernel] Error 2
> make: *** [sub-make] Error 2
Disable SMP kernel boot on UP system, you do not need it for OMAP4,
since OMAP4 is an SMP system.
--
Gilles.
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
