On 10/26/2011 08:00 PM, Robert wrote:
>
>
>
> Dnia 26 października 2011 17:36 Gilles Chanteperdrix
> <[email protected]> napisał(a):
>
>> On 10/26/2011 05:26 PM, Robert wrote:
>>>
>>> Dnia 24 października 2011 22:58 Gilles Chanteperdrix
>>> <[email protected]> napisał(a):
>>>
>>>> On 10/24/2011 01:11 PM, Robert wrote:
>>>>>
>>>>>
>>>>>
>>>>> Dnia 24 października 2011 13:07 Gilles Chanteperdrix
>>>>> <[email protected]> napisał(a):
>>>>>
>>>>>> On 10/24/2011 12:59 PM, Robert wrote:
>>>>>>> Dnia 24 października 2011 12:37 Gilles Chanteperdrix
>>>>>>> <[email protected]> napisał(a):
>>>>>>
>>>>>>>> Ok. Try calling /usr/xenomai/bin/xeno-test instead of cding to the
>>>>>>>> directory and runing ./xeno-test.
>>>>>>>
>>>>>>> No difference.
>>>>>>
>>>>>> I am unable to reproduce this issue, but I am using ash, not bash. last
>>>>>> attempt: could you try adding /usr/xenomai/bin to the PATH variable?
>>>>>
>>>>> The same.
>>>>
>>>> Could you try the following patch?
>>>>
>>>> http://git.xenomai.org/?p=xenomai-head.git;a=commitdiff;h=8f2fd0b49e51fb2547c4972f2cda9e32dfc5dca6;hp=82ab99a3a840dd78c3ed8e5a6555f422420b7827
>>>>
>>>> The problem is due to dash, not bash, which is linked to /bin/sh by
>>>> default on ubuntu.
>>>>
>>>
>>> I applied Yours patches, and now it compile and almost run:
>>>
>>> root@panda:/# /usr/xenomai/bin/xeno-test
>>> Started child 1035: /bin/bash /usr/xenomai/bin/xeno-test-run-wrapper
>>> /usr/xenoma
>>> i/bin/xeno-test
>>>
>>> ++ echo 0
>>>
>>> After that, board is dead.
>>>
>>> And I have to build xenomai sources using 'make
>>> CFLAGS+=-Wa,mimplicit-it=thumb'.
>>> My gcc version 4.5.2-8ubuntu4
>>
>> Please send me your .config, but beware your mailer, it wraps long line,
>> which make the last .config you sent unusable. I have not tried building
>> for thumb, if that is what you are doing.
>>
>> You can try running the "latency" command alone, to see if it also
>> hangs. You should also redirect the kernel console to the serial port,
>> and capture the serial port on another computer, in case the hang is a
>> kernel oops.
>>
>> Find attached the .config I use, and which works here.
>
>
> Xenomai: incompatible feature set
> (userland requires "kuser_tsc fastsynch nosmp", kernel provides "sa1100 v6 e
> abi kuser_tsc fastsynch smp", missing="nosmp").
>
> I still don't know how to boot pandaboard with smp support.
>
> My config is here: http://www.copypastecode.com/88653/
Enable SMP when compiling Xenomai user-space support, by passing
--enable-smp to the configure script.
>
>
--
Gilles.
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
