On 11/01/2011 10:55 AM, Łukasz Sacha wrote:
Hi,
I'having problems with patching the 2.6.38.8 kernel.
I prepare my kernel first to work on my device (mini2440). I configure
it to use arm processor, etc.
Then I patch from xenomai:
scripts/prepare-kernel.sh --arch=arm
--adeos=ksrc/arch/arm/patches/adeos-ipipe-2.6.38.8-arm-1.18-03.patch
--linux=../linux-2.6.38.8
Now when I enter the ../linux-2.6.38.8 and run make xconfig (or
menuconfig) I don't even see my processor there - it's set to Pentium
PRO.
What should I do now?
Check the README.INSTALL file, section 2.4, Building for ARM.
$ make ARCH=arm xconfig
^^^^^^^^
Your .config file for your 2440 board is probably broken by now if you
saved your previous configuration attempt (i.e. switched to x86
settings). You may want to check this as well.
regards,
--
Łukasz Dragilla Sacha
_______________________________________________
Xenomai-help mailing list
Xenomai-help@gna.org
https://mail.gna.org/listinfo/xenomai-help
--
Philippe.
_______________________________________________
Xenomai-help mailing list
Xenomai-help@gna.org
https://mail.gna.org/listinfo/xenomai-help
