On 11/06/2011 07:10 PM, at91_enthus wrote:
> On 11/06/2011 12:01 PM, Gilles Chanteperdrix wrote:
>> On 11/06/2011 06:56 PM, at91_enthus wrote:
>>> Hi.
>>>
>>> I gave Xenomai 2.6.0 a try and installed a newly patched kernel on my
>>> AT91SAM9G20 board.
>>>
>>> Here is my setup:
>>>
>>> proc: AT91SAM9G20
>>> kernel: 2.6.35.9
>>> OS: embedded Debian Squeeze
>>>
>>> The board boots fine up to stage 2 (user terminal). Sometimes, I am able
>>> to get a login terminal, despite seg fault messages.
>>>
>>> A similar behavior occurs in a Xenomai capable 2.6.37 kernel, only
>>> without the fault messages. In this case the board simply freezes.
>>>
>>> I included the files (.config and fault messages) in the attachments.
>>>
>> You enabled CONFIG_FCSE_GUARANTEED, I do not think Debian squeeze can
>> boot with that, you need a real embedded filesystem, or use
>> CONFIG_FCSE_BEST_EFFORT.
>>
>>
>
> Since I've started looking in to Xenomai, I have been using FCSE
> "guaranteed" and "best efort" along with both Debian Squeeze and Lenny
> (Xenomai 2.5 series) without any issues.
>
> I'll change the FCSE setting to see if I get a different behavior.
If the problem is due to processes trying to go over the 32MB limit, you
can enable CONFIG_ARM_FCSE_MESSAGES, and observe the kernel console,
with this option enabled, you should get clear error messages.
Otherwise, enable CONFIG_DEBUG_USER, and pass debug_user=29 on the
kernle command line to know the origin of the fault, still with
CONFIG_ARM_FCSE_MESSAGES on for additional details.
--
Gilles.
_______________________________________________
Xenomai-help mailing list
Xenomai-help@gna.org
https://mail.gna.org/listinfo/xenomai-help
