On 01/17/2012 09:19 PM, Santiago Focke wrote:
> Thanks Gilles for the replay
>
> 2012/1/16 Gilles Chanteperdrix <[email protected]>
>>
>> On 01/16/2012 09:03 PM, Santiago Focke wrote:
>>> Dear all
>>>
>>> I've been trying to install Xenomai but I haven't been able to do it
>>> right. After being able of building and installin the kernel and
> Xenomai,
>>> I tried to run the example program trivial-periodic, I got the following
>>> error
>>
>> We do not know which kernel version, which xenomai version, which adeos
>> I-pipe version.
>>
>
> Sorry I didn't write the kernel + xenomai specifications. I'm using
> linux-2.6.38.8 and xenomai 2.6. About Adeos and I-pipe, should I do any
> kind of installation of the before installing Xenomai??
>
>>>
>>> /usr/src/xenomai-2.6/examples/native$ ./trivial-periodic
>>> Xenomai: incompatible feature set
>>> (userland requires "tsc fastsynch", kernel provides "sep fastsynch smp",
>>> missing="tsc").
>>>
>>> I read that the reason for this is that I didn't configure correctly the
>>> processor family (with xconfig). Is that the reason? Also, I've been
> trying
>>> to know which option should I choose (I chose CONFIG_M586 at the
>>> beggining), but I don't know were to get that information. The CPU info
>>> goes as follows:
>>>
>>> /proc/cpuinfo
>>>
>>> processor : 0
>>> vendor_id : GenuineIntel
>>> cpu family : 6
>>> model : 37
>>> model name : Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz
>>
>> So, you have a core i7, anything newer than "pentium pro" (an older than
>> ten years old architecture) should do, but better select the processor
>> you actually have or the nearest substitute: so, assuming you are
>> compiling a 2.6.38 kernel, "core 2/newer xeon" should do. Also note that
>> a core i7 is able to run in 64 bits mode, so running it in 32 bits mode
>> is a bit a pity.
>>
> Regarding the processor family, i selected 'core 2/newer xeon', and tried
> to build a 64-bits kernel. But when I tried to boot the new patched kernel,
> I got the following error and get stacked in the booting:
>
> [ 0.051013] ..MP_BIOS bug: 8254 timer not conncted to IO-APIC
> [ 2.338200] EXT3-fs (sda1) error: couldn't mount because of unsupported
> optional features (240)
> [ 2.362370] EXT3-fs (sda1) error: couldn't mount because of unsupported
> optional features (240)
> [ 2.400400] request_module: runaway loop modprobebinfmt-464c
> [ 2.400449] request_module: runaway loop modprobebinfmt-464c
> [ 2.400570] request_module: runaway loop modprobebinfmt-464c
> [ 2.400612] request_module: runaway loop modprobebinfmt-464c
> [ 2.400755] request_module: runaway loop modprobebinfmt-464c
>
> I don't know if I did something wrong in the installation process. These
> were my steps:
Your kernel is probably not configured correctly. Something is missing
in the filesystems configuration such as ext4 support.
Also note that you need to have a 64 bits root filesystem if you want to
run xenomai on a 64 bits kernel.
--
Gilles.
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
