On 10/03/2012 09:26 AM, Jari Lietzen wrote:

> 27.09.2012 21:20, Gilles Chanteperdrix kirjoitti:
>> On 09/27/2012 05:47 PM, Jari Lietzen wrote:
>>
>>> 27.09.2012 10:46, Gilles Chanteperdrix kirjoitti:
>>>> On 09/27/2012 07:49 AM, Jari Lietzen wrote:
>>>>
>>>>> 27.09.2012 00:30, Gilles Chanteperdrix kirjoitti:
>>>>>> On 09/24/2012 09:09 PM, Jari Lietzen wrote:
>>>>>>
>>>>>>> Hi!
>>>>>>>
>>>>>>> Kernel 2.6.37.6 and Xenomai 2.5.6 boots ok, though displaying the error
>>>>>>> message: "MP-BIOS bug: 8254 timer not connected to IO-APIC".
>>>>>>>
>>>>>>> If I try to use Xenomai 2.6.1 the error message displayed is the same
>>>>>>> and system just hangs after that. No other messages, keyboard doesn't
>>>>>>> work, nothing. I started with the same kernel configuration, but I have
>>>>>>> disabled a few options more (e.g. syscall auditing, shared interrupt
>>>>>>> support).
>>>>>>>
>>>>>>> I'm using Intel Core 2 Duo processor with Asus P5LD2-VM motherboard.
>>>>>>> Obviously I'm missing something, but I can't figure that out. Here is
>>>>>>> the kernel config file:
>>>>>>
>>>>>>
>>>>>> If you use one of the I-pipe patches whih ship with Xenomai 2.6.1, such
>>>>>> as the patch for linux 3.2, do you also have the issue?
>>>>>>
>>>>>
>>>>> Hi!
>>>>>
>>>>> Yes, I have patched the kernel with this:
>>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64
>>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37.6-x86-2.9-02.patch
>>>>> --linux=/usr/src/linux
>>>>>
>>>>> xenomai being a link to xenomai-2.6.1 -directory. When I switch between
>>>>> Xenomai 2.5.6 and 2.6.1 I remove the whole linux directory and extract
>>>>> it from the source again and change the xenomai link accordingly. With
>>>>> Xenomai 2.5.6 the patching was done with this:
>>>>> /usr/src/xenomai/scripts/prepare-kernel.sh --arch=x86_64
>>>>> --adeos=/usr/src/xenomai/ksrc/arch/x86/patches/adeos-ipipe-2.6.37-x86-2.9-00.patch
>>>>>     --linux=/usr/src/linux
>>>>
>>>>
>>>> So, could you try Xenoami 2.5.6 with the 2.9-02 patch, or 2.6.1 with the
>>>> 2.9-00 patch, or with the patch for linux 3.2 ?
>>>>
>>>
>>> I booted 2.6.37.6 kernel patched with 2.9-00 patch and compiled Xenomai
>>> 2.6.1 with the following commands:
>>
>>
>> I mean Xenomai 2.6.1 kernel with the 2.9-00 patch or Xenomai 2.5.6
>> kernel with 2.9-00 patch. Since the kernel is not booting, we do not
>> care about the user-space at this point.
>>
> 
> I tested again the following combinations. Always starting with a fresh 
> kernel tree and patching it:
> 
>               2.9-00 patch    2.9-02 patch
> ----------------------------------------------
> Xenomai 2.5.6 OK              OK
> 
> Xenomai 2.6.1 boot fails      boot fails


Hi,

I could reproduce the bug, it should be fixed with the following patch:
http://git.xenomai.org/?p=xenomai-2.6.git;a=commitdiff;h=28984e66e9e17701354f8883b025fcf83f8b0b68;hp=8417949f5e7d1b4483eb3b6344ec5f3124ecf740

-- 
                                                                Gilles.

_______________________________________________
Xenomai mailing list
[email protected]
http://www.xenomai.org/mailman/listinfo/xenomai

Reply via email to