Hello, Thank you for your quick response (despite my delayed answer).
I used the separated kernel approach too (delivery time issues). I intend to reorganize in order to have the complete procedure, such as recommended by Gilles. When I get it done, I'll send here the patch. I'm using imx53 quick start board for my project, using meta-fsl-arm with Yocto project. Thank you very much for your help. Best regards, Flavio PS: I couldn't find a Xenomai recipe in Openembedded tree. 2012/10/13 Gilles Chanteperdrix <[email protected]>: > On 10/13/2012 12:02 PM, Maksym Parkachov wrote: > >> Hi Gilles, >> >>> Adding I-pipe and Xenomai as a single patch to the kernel does not seem >>> the way to go. >>> >>> I would rather have the linux kernel building rules call >>> prepare-kernel.sh to apply the I-pipe patch and setup xenomai links to >>> the xenomai package source directory. It is not really hard, and it >>> makes things way easier to maintain. >> >> It was just a quick way to get result, when I have time I'll try to >> rework recipe with your suggestions. > > > No problem, really, it was just a remark. > > -- > Gilles. > > _______________________________________________ > Xenomai mailing list > [email protected] > http://www.xenomai.org/mailman/listinfo/xenomai -- Flavio de Castro Alves Filho [email protected] www.linuxembarcado.com Twitter: http://twitter.com/#!/fraviofii LinkedIn profile: www.linkedin.com/in/flaviocastroalves _______________________________________________ Xenomai mailing list [email protected] http://www.xenomai.org/mailman/listinfo/xenomai
