Hello all, We have a PC/104 computer with a PEAK PC/104-PLUS card which we are successfully using to talk CAN from within Xenomai. For various reasons, we want to switch to using a mini-ITX board.
We're trying to use the PEAK PCAN-miniPCIe card on the mini-ITX board, but we are having no luck - the card doesn't seem to get seen by Xenomai. We're not sure if this is an IRQ problem or something else. On the PC104 system, we had an IRQ conflict which we were able to solve by changing a jumper - the new card has no jumpers to change, and our motherboard's BIOS does not have any settings that allow changing of daughterboard IRQs. Both systems are running the same OS install with the same kernel. The 'latency' command in the Xenomai testsuite runs correctly on both systems. I have put together a comparison of command outputs on the old (working) and new (non-working) systems: http://goo.gl/GBy8h Any insight into what's wrong in our new system and how to get it working would be greatly appreciated! Thanks, Daniel _______________________________________________ Xenomai mailing list [email protected] http://www.xenomai.org/mailman/listinfo/xenomai
