* I also missed that it was a warning.  Sorry about that.

On Sun, Feb 23, 2014 at 5:37 PM, Adam Vaughan <[email protected]> wrote:

> I haven't tried using the official Xenomai Raspberry Pi 3.8.13 patch for a
> few months now because I had some issue disabling the USB FIQ and I needed
> to run alternate FIQ code.  I can't remember exactly what error I was
> seeing, but my stopgap solution was to fall back to 3.5.7 (detailed below).
>  I believe the USB FIQ disable issue I was seeing has been fixed in more
> recent RPi kernels [1], but I haven't had a chance yet to try out that
> patch with the Xenomai RPi 3.8.13 kernel.  It is curious that your 3.8.13
> kernel log throws the exception at the same location just after the hub
> detection as in [1] and involves the same USB code.  Perhaps they're
> related?
>
> If any kernel will work and you need to get up and going now, I had the
> most success with the set of 3.5.7 patches at [2] (Google translate does a
> good job translating the French, but it can also change acronyms in the
> text such as RTDM to TDGR).  I did, however, have occasional 3.5.7 kernel
> crashes at ext4 code with two different SD cards which haven't occurred
> again since moving to the 3.10.11 Raspian distro (I'm working on frontend
> code right now, and it's just easier doing it with vetted binaries).  These
> infrequent crashes seemed to be associated with heavy file system accesses,
> but it wasn't enough of issue that I needed to find a solution right then.
>
> [1]  https://github.com/raspberrypi/linux/issues/355
> [2]
> http://www.blaess.fr/christophe/2013/02/15/raspberry-pi-interruptions-gpio-avec-rtdm/
>
>
> On Sun, Feb 23, 2014 at 4:27 PM, Gregory Dymarek <[email protected]>wrote:
>
>> Hi,
>>
>>
>> I compiled a fresh rpi-3.8 kernel using the following patches (from
>> xenomai-2.6.3):
>> - ipipe-core-3.8.13-raspberry-pre-2.patch
>> - ipipe-core-3.8.13-arm-3.patch
>> - ipipe-core-3.8.13-raspberry-post-2.patch
>>
>> All compiled well, but when booting this kernel it reports an exception.
>> The entire boot log is here: http://pastebin.com/K7v44nPw
>>
>> I am still not very faimiliar with the architecture so I am not really
>> able
>> to sort it myself...
>> Any advise please?
>>
>> [    1.915956] hub 1-0:1.0: 1 port detected
>> [    1.923672] ------------[ cut here ]------------
>> [    1.931807] WARNING: at kernel/irq/handle.c:146
>> handle_irq_event_percpu+0x190/0x1b4()
>> [    1.943148] irq 32 handler usb_hcd_irq+0x0/0x7c enabled interrupts
>> [    1.952840] Modules linked in:
>> [    1.959469] [<c00141ec>] (unwind_backtrace+0x0/0xec) from [<c00204fc>]
>> (warn_slowpath_common+0x4c/0x64)
>> [    1.972561] [<c00204fc>] (warn_slowpath_common+0x4c/0x64) from
>> [<c0020544>] (warn_slowpath_fmt+0x30/0x40)
>> [    1.985872] [<c0020544>] (warn_slowpath_fmt+0x30/0x40) from
>> [<c0077838>]
>> (handle_irq_event_percpu+0x190/0x1b4)
>> [    1.999671] [<c0077838>] (handle_irq_event_percpu+0x190/0x1b4) from
>> [<c00778c0>] (handle_irq_event+0x64/0x94)
>> [    2.013394] [<c00778c0>] (handle_irq_event+0x64/0x94) from [<c007a6c4>]
>> (handle_level_irq+0x78/0x108)
>> [    2.026432] [<c007a6c4>] (handle_level_irq+0x78/0x108) from
>> [<c0077010>]
>> (generic_handle_irq+0x1c/0x30)
>> [    2.039690] [<c0077010>] (generic_handle_irq+0x1c/0x30) from
>> [<c000eacc>] (handle_IRQ+0x30/0x84)
>> [    2.052361] [<c000eacc>] (handle_IRQ+0x30/0x84) from [<c008036c>]
>> (__ipipe_do_sync_stage+0x25c/0x278)
>> [    2.065548] [<c008036c>] (__ipipe_do_sync_stage+0x25c/0x278) from
>> [<c00083c4>] (__ipipe_grab_irq+0x2c/0x70)
>> [    2.079312] [<c00083c4>] (__ipipe_grab_irq+0x2c/0x70) from [<c0422d14>]
>> (__irq_svc+0x34/0xc0)
>> [    2.091773] Exception stack(0xcd82de00 to 0xcd82de48)
>> [    2.100766] de00: f2980008 00000000 00000000 00000000 00000000 00000000
>> cd99ec00 c05db7c4
>> [    2.112995] de20: cd9ed380 c05bbfc0 c0523a7c c05db8a4 00000030 cd82de48
>> c02f947c c02f8e44
>> [    2.125241] de40: 60000113 ffffffff
>> [    2.132818] [<c0422d14>] (__irq_svc+0x34/0xc0) from [<c02f8e44>]
>> (dwc_otg_driver_probe+0x114/0x7e0)
>> [    2.146103] [<c02f8e44>] (dwc_otg_driver_probe+0x114/0x7e0) from
>> [<c02aa504>] (really_probe+0x60/0x1e8)
>> [    2.159771] [<c02aa504>] (really_probe+0x60/0x1e8) from [<c02aa778>]
>> (__driver_attach+0x98/0x9c)
>> [    2.172812] [<c02aa778>] (__driver_attach+0x98/0x9c) from [<c02a8b70>]
>> (bus_for_each_dev+0x60/0x94)
>> [    2.186145] [<c02a8b70>] (bus_for_each_dev+0x60/0x94) from [<c02a9cb8>]
>> (bus_add_driver+0xac/0x244)
>> [    2.199589] [<c02a9cb8>] (bus_add_driver+0xac/0x244) from [<c02aae20>]
>> (driver_register+0x78/0x140)
>> [    2.213103] [<c02aae20>] (driver_register+0x78/0x140) from [<c05a0074>]
>> (dwc_otg_driver_init+0x20/0xe0)
>> [    2.226973] [<c05a0074>] (dwc_otg_driver_init+0x20/0xe0) from
>> [<c00086e0>] (do_one_initcall+0x114/0x180)
>> [    2.241020] [<c00086e0>] (do_one_initcall+0x114/0x180) from
>> [<c058c86c>]
>> (kernel_init_freeable+0xf8/0x1b8)
>> [    2.255236] [<c058c86c>] (kernel_init_freeable+0xf8/0x1b8) from
>> [<c041c210>] (kernel_init+0x8/0x150)
>> [    2.268963] [<c041c210>] (kernel_init+0x8/0x150) from [<c000dc40>]
>> (ret_from_fork+0x18/0x38)
>> [    2.282034] ---[ end trace 6e968ac9df7b1cbe ]---
>> [    2.291589] dwc_otg: FIQ enabled
>> _______________________________________________
>> Xenomai mailing list
>> [email protected]
>> http://www.xenomai.org/mailman/listinfo/xenomai
>>
>
>
_______________________________________________
Xenomai mailing list
[email protected]
http://www.xenomai.org/mailman/listinfo/xenomai

Reply via email to