On Tue, Nov 18, 2014 at 08:14:48PM +0100, Gilles Chanteperdrix wrote: > On Tue, Nov 18, 2014 at 01:48:43PM -0500, Lennart Sorensen wrote: > > On Tue, Nov 18, 2014 at 04:26:49PM +0100, Gilles Chanteperdrix wrote: > > > Ok, there is already code in the I-pipe for turning off smartidle > > > for other peripherals (like the hardware timer, the omap specific > > > one used on omap3, and SMP omap4 and 5 when in UP mode, not the > > > cortex a9 global timer), so, any patch to toggle this bit with > > > if (IS_ENABLED(IPIPE)) > > > will be accepted. > > > > I am just adding 'ti,no-idle' to gpio7 in the dtb. That appears to > > be right. Building it now to test it. > > > > The handling is of in omap-hwmod.c, not in gpio-omap.c so not sure how > > to make ipipe know that a given gpio bank is used for irq and should > > not idle. At least not in a clean manner. > > I am afraid this parameter can not be found in mainline kernel 3.16. > So, it must be a local addition of the kernel you use.
Yeah I am using the ti-linux tree since they are not done merging yet. Not that it worked anyhow. -- Len Sorensen _______________________________________________ Xenomai mailing list [email protected] http://www.xenomai.org/mailman/listinfo/xenomai
