Steve B <sbattazzo <at> gmail.com> writes: > > Hello, > I have put together a quick port of the Linux driver for CCAN/DCAN to work > with RTDM, thanks to Wolfgang Grandegger's Flexcan driver port as an > example. > > It's not thoroughly/formally tested, but it works with rtcansend and > rtcanrecv, and works well with my application sending and receiving a few > hundred frames per second at 500k baud, which I think is a good enough > initial test for me. > I can also give the "rtt" test a shot when I have time. > > Is there anyone out there who would like to test this? I am wondering what > is the procedure to submit, should I create a patch and attach? I haven't > looked at how to add it into the kernel build process, I have just built it > in its own separate place so far. > > Steve >
Hello Steve, I intended to do a port a few months ago, because i started a project with a Atom™ E640 cpu. The internal can controller is a clone of the BOSCH ccan module and your driver should run on this hardware as well. If you can post me the patch i can try to get it going on my hardware (the project is frozen at the moment due to other hardware related problems). Alfred _______________________________________________ Xenomai mailing list [email protected] http://www.xenomai.org/mailman/listinfo/xenomai
