we have bought a network card D-Link DGE-528T following as a supported card 
explained in the README file.

The lspci shows:
04:00.0 Ethernet controller: D-Link System Inc DGE-528T Gigabit Ethernet 
Adapter (rev 10)

However, the rt_r8169 shows this:

[  937.787081] Initializing rt_r8169 driver
[  937.787148] rt_r8169 0000:04:00.0: enabling device (0000 -> 0003)
[  937.787200] R8169: no MSI, Back to INTx.
[  937.788199] rt_r8169: PCI device 0000:04:00.0: unknown chip version, 
assuming RTL-8169
[  937.788211] RTnet: registered rteth2
[  937.788211] rteth2: Identified chip type is 'RTL8169'.
[  937.788213] rteth2: rt_r8169 RTnet Gigabit Ethernet driver 2.2-04 at 
0xffffc90001bda000, e4:6f:13:a8:ce:49, IRQ 18
[  937.796180] rteth2: Auto-negotiation Enabled.
[  939.357196] rteth2: 100Mbps Full-duplex operation.

and the card doesn't work with rtnet. At least, my programs work for the 
rt_igb and rt_e1000new but not for this. So, could you give me some advice 

- include the chip version (unknown chip version, assuming RTL-8169)
- detect the possible failure in the driver

Best regards,


Linux User 152692     GPG: 05F4A7A949A2D9AA
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: This is a digitally signed message part.
Xenomai mailing list

Reply via email to