Sorry, but no I install 4.9.90 and new patch Ive the same problems - no responce with my LKM and SD card reader I can add logs
with sd discover new details: if boot with sd-card inserted in reader - sd-card can read , if I remove card - get no responce difference with lsmod command output (when inserted card and not) is nls_iso8859_1 this module is absent without sd-card I try boot without sd card and do modprobe nls_iso8859_1 after insert sdcard - get no responce ----- Original Message ----- From: "Philippe Gerum" <r...@xenomai.org> To: "Jan Kiszka" <jan.kis...@web.de> Cc: "xenomai" <xenomai@xenomai.org> Sent: Tuesday, March 27, 2018 4:12:32 PM Subject: Re: [Xenomai] 4.9 for x86 issue On 03/10/2018 11:06 PM, Jan Kiszka wrote: > On 2018-03-09 08:51, Jan Kiszka wrote: >> 4.9 requires more work, I've pushed the beginning to wip/4.9 in the same >> repo. > > I started to patch further on this during my flight (wip/4.9 updated), > noticed that the 4.14-wip queue will need a little bit sysentry tweaking > as well (missing 64-bit syscall dispatching), and then had to find 4.9 > in a rather unfortunate state /wrt x86-64: CPUs are no longer idling > properly. I went back to ipipe-core-4.9.24-x86-2, without a difference. > > If you should look into 4.9-x86 as you indicated, please check this. Both issues fixed in 4.9.90/x86 as pushed lately. The result has run overnight in 64bit mode, and for a couple of hours in ia32emu mode. So far so good. -- Philippe. _______________________________________________ Xenomai mailing list Xenomai@xenomai.org https://xenomai.org/mailman/listinfo/xenomai _______________________________________________ Xenomai mailing list Xenomai@xenomai.org https://xenomai.org/mailman/listinfo/xenomai