I'll give it a shot, I will let you know on Monday. Thanks and good weekend R.
Il ven 5 apr 2019, 11:42 Jan Kiszka <jan.kis...@siemens.com> ha scritto: > On 05.04.19 10:44, cagnulein wrote: > > Hi, yes I double checked the patch and it's applied correctly. > > Here you can find my config. > > > > CONFIG_DEBUG_STACKOVERFLOW is disabled. > > > > I can't get the uart on this system, is there any other way to catch log > in this > > scenario? > > UART is mandatory for debugging such crashes. Use a PCI extension card if > your > board has no UART connector anymore. > > Well, you may try to lift Xenomai with KVM inside a KVM VM and catch the > UART > output of the first level VM. This is how I'm debugging. > > > > > Why should I test the 4.4.y? 4.9.146 works fine on the same system (with > the > > same guest). Did I miss something? > > Well, 4.9 would be as broken as 4.4 currently is. But 4.4 is supported, > 4.9 is > discontinued by now. In any case, this indicates we have another > difference > caused by changed in 4.14 (and before). > > I'll see if I can reproduce by booting Win10 in my nested setup. > > Jan > > -- > Siemens AG, Corporate Technology, CT RDA IOT SES-DE > Corporate Competence Center Embedded Linux >
