https://bugzilla.xfce.org/show_bug.cgi?id=16412
--- Comment #17 from Alistair Buxton <a.j.bux...@gmail.com> --- Some other random observations: "Noutputs" reads 2 when the external is connected and laptop is closed but it reads 1 when the laptop is open and the external is disconnected. I think this is because when you close the laptop, the display is not disconnected, just disabled. The difference in observed behavior may be down to display profiles or the setting "automatically configure connected displays". Both of these affect the way xfsettingsd processes the current display information: Display profiles can cause the display scale to be initialized from the saved profile, meaning that bug #15971 will only happen when the set of connected monitors does not match any known profile. This happens whenever you plug in a new monitor that Xfce has never seen before. It also happens if you unplug one monitor which is part of a set, and the new set does not match any profile. The latter is quite easy to trigger if you have three monitors: you need 7 profiles to cover all possible combinations. If the setting "automatically configure connected displays" is not selected then Xfce won't do anything when a new display is connected and no existing profile is matched. However it will still reconfigure all displays whenever a monitor is disconnected, and I think if a profile is matched. This all adds up to the behavior on monitor connect/disconnect being very hard to debug. -- You are receiving this mail because: You are the assignee for the bug. _______________________________________________ Xfce-bugs mailing list Xfce-bugs@xfce.org https://mail.xfce.org/mailman/listinfo/xfce-bugs