Hello,
We're trying to get a dual headed Nvidia GeForce2 MX (AGP) and ATI Rage
XL (PCI) setup to run under RedHat 8.0. I'm pretty sure that we've got
the XF86Config file setup correctly, but it ends up failing to get the
ATI setup running after it sets up the nv driver.
The ATI card works just fine by itself. Are there any additional things
that I should do to try to get this running?
Thanks!
-Scott
Here are relevant sections from XFree86.0.log:
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Jan 23 12:42:35 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Dual Head"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "NVIDIA GeForce 2 MX (generic)"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "ATI Technologies Inc Rage XL"
...
(**) Option "Xinerama" "on"
(**) Xinerama: enabled
(--) using VT number 7
...
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
...
(--) PCI:*(1:0:0) NVidia GeForce2 MX/MX 400 rev 178, Mem @ 0xfb000000/24,
0xe8000000/27, BIOS @ 0xfc9f0000/16
(--) PCI: (2:1:0) ATI Mach64 GR rev 39, Mem @ 0xfd000000/24, 0xfca00000/12
*******
NOTE: It's clear that the PCI device is on 2:1:0 for the ATI card.
*******
(II) ATI: Candidate "Device" section "ATI Technologies Inc Rage XL".
(WW) ATI: PCI/AGP Mach64 in slot 2:1:0 could not be detected!
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
