Your full XF86Config would have been helpful
Usually RH 7.3 uses XF86Config-4 for X 4.2 are you sure you are not using an X 3.3.6 
config for X
4.2? (you can check: there should be no keyboard and pointer sections but instead two 
input device
sections in the config file...)
Lionel



--- WADE SCHOFIELD <[EMAIL PROTECTED]> wrote:
> Hello,
> 
> I am attempting to run X on my RH 7.3 installation with no luck. What is strange is 
>that the
> same hardware ran X under 7.2 flawlessly! Also, I used the graphical install and 
>went through
> the X setup with no errors. I have tried everything I know even copying the old 
>XF86Config from
> the 7.2
> installation with no success.
> 
> I am running an old system with an S3 video card. Any assistance would be greatly 
>appreciated.
> 
> Sincerely,
> 
> Wade Schofield
> 
> 
> XFree86.0.log:
> 
> XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 23 January 2002
>         If the server is older than 6-12 months, or if your card is
>         newer than the above date, look for a newer version before
>         reporting problems.  (See http://www.XFree86.Org/)
> Build Operating System: Linux 2.4.17-0.13smp i686 [ELF]
> Build Host: daffy.perf.redhat.com
> 
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
>          (++) from command line, (!!) notice, (II) informational,
>          (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 20 20:34:36 2003
> (==) Using config file: "/etc/X11/XF86Config"
> Parse warning on line 102 of section Keyboard in file /etc/X11/XF86Config
>         Ignoring obsolete keyword "LeftAlt".
> Parse error on line 102 of section Keyboard in file /etc/X11/XF86Config
>         "Meta" is not a valid keyword in this section.
> (EE) Problem parsing the config file
> (EE) Error from xf86HandleConfigFile()
> 
> Fatal server error:
> no screens found
> 
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> This can be found in the log file "/var/log/XFree86.0.log".
> Please report problems to [EMAIL PROTECTED]
> _______________________________________________
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Reply via email to