Here is what lspci -vv says about my VGA card:
01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 11) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1000ns min, 63750ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
Expansion ROM at 000c0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] AGP version 1.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
I'm really confused on what would cause this. Like I said, never had a problem with any other distro. Could it be some of the "security features" that gentoo 1.4 has in it's kernel?
Any help you could give would be great.
Derek
Sumanth Peddamatham wrote:
yeah, xfree-4.2.99.4 is the only version of XFree that i've ever had any sort of problem with. i'll attach a copy of my XF86Config, maybe that will help you.Sumanth P. On Sunday 09 February 2003 05:33 am, you wrote:<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <title></title> </head> <body> Did you say that version 4.2.1-r2 worked fine for you? I just emerged 4.2.1-r2...and it doesn't work at all now...before it did load the x server but it wouldn't refresh the screen at all<br> <br> Derek<br> <br> Sumanth Peddamatham wrote:<br> <blockquote type="cite" cite="" class="moz-txt-link-rfc2396E" href="">"[EMAIL PROTECTED]"> <pre wrap="">oops. I forgot to add that after you emerge an older copy of xfree, you want to copy the savage_o.drv to an alternate location and then re-emerge the latest beta. After it's done building, just copy the old savage_o.drv over the newer (non-working) one. If you want to get a little bit more advanced, and prolly save a little time, you can build an older version of xfree without actually emerging it into your active filesystem. (ahhhh, the beauty of gentoo) you can do this by typing: 1. cd /usr/portage/x11-base/xfree 2. ebuild <XFree version>.ebuild build -after it's done building- 3. cd /var/tmp/portage/<XFree version>/work/ 4. find the savage_o.drv that was built and copy it over your old savage_o.drv. man, it sure came out sounding a lot more complicated than i intended it to, but i'm in a little bit of a hurry. if you need better directions, just drop me a line. Sumanth P. On Sunday 09 February 2003 01:26 am, you wrote: </pre> <blockquote type="cite"> <pre wrap="">Hi, I've just started using Gentoo and I have this same issue, have you found a work around? is there a way I can emerge the older version of xfree? Thanks in advance. Derek Ditch University of Missouri - Rolla Computer Science Undergraduate <a class="moz-txt-link-abbreviated" href="" class="moz-txt-link-rfc2396E" href="">"mailto:[EMAIL PROTECTED]">[EMAIL PROTECTED]</a> </pre> </blockquote> <pre wrap=""><!----> </pre> </blockquote> </body> </html>
# File generated by anaconda. Section "ServerLayout" Identifier "Anaconda Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "AllowMouseOpenFail" "true" EndSection Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "/usr/X11R6/lib/X11/fonts/truetype/" FontPath "/usr/X11R6/lib/X11/fonts/TTF/" FontPath "/usr/X11R6/lib/X11/fonts/artwiz/" FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" # FontPath "unix/:7100" EndSection Section "Module" Load "GLcore" Load "dbe" Load "extmod" Load "fbdevhw" Load "dri" Load "glx" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" # Option "AutoRepeat" "500 5" Option "AutoRepeat" "250 30" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" Option "XkbVariant" "basic" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "Modes" Identifier "T23 modes" Mode "1024x768" DotClock 65 HTimings 1024 1032 1176 1344 VTimings 768 771 777 806 Flags "-hsync" "-vsync" EndMode EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" HorizSync 31.5-70 VertRefresh 50-90 Option "dpms" EndSection Section "Monitor" Identifier "TV" HorizSync 30-50 VertRefresh 60 EndSection Section "Device" # no known options Identifier "S3 Savage/MX" Driver "savage" VendorName "S3 Savage/MX" BoardName "S3 Savage/MX" #Option "NoAccel" Option "SWCursor" #Option "HWCursor" Option "UseBIOS" Option "ShadowStatus" Option "ForceInit" BusID "PCI:1:0:0" EndSection Section "Device" # no known options Identifier "S3_TV" Driver "savage" VendorName "S3 Savage/MX" BoardName "S3 Savage/MX" #Option "NoAccel" Option "TvOnly" EndSection Section "Screen" Identifier "Screen0" Device "S3 Savage/MX" Monitor "Monitor0" DefaultDepth 16 Subsection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "Screen" Identifier "TV_OUT" Device "S3_TV" Monitor "TV" DefaultDepth 16 Subsection "Display" Depth 8 Modes "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "640x480" ViewPort 0 0 EndSubsection EndSection Section "DRI" Mode 0666 EndSection
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.20-gentoo-r1 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Feb 8 17:42:37 2003
(++) Using config file: "/root/XF86Config.newer"
(==) ServerLayout "Anaconda Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "S3 Savage/MX"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "AutoRepeat" "250 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(**) Option "XkbVariant" "basic"
(**) XKB: variant: "basic"
(==) Keyboard: CustomKeycode disabled
(WW) The directory "/usr/X11R6/lib/X11/fonts/artwiz/" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/truetype/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail" "true"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 1179,0001 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:05:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:05:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:05:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:05:3: chip 8086,7113 card 0000,0000 rev 03 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 8086,1229 card 8086,2411 rev 09 class 02,00,00 hdr 80
(II) PCI: 00:08:1: chip 115d,00d4 card 8086,2411 rev 00 class 07,00,02 hdr 80
(II) PCI: 00:0b:0: chip 1179,0617 card 0000,0000 rev 20 class 06,07,00 hdr 82
(II) PCI: 00:0b:1: chip 1179,0617 card 0000,0000 rev 20 class 06,07,00 hdr 82
(II) PCI: 00:0c:0: chip 1073,0012 card 1179,0001 rev 00 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 5333,8c12 card 1179,0001 rev 11 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
(II) Bus 1 prefetchable memory range:
(--) PCI:*(1:0:0) S3 Savage/IX-MV rev 17, Mem @ 0xf0000000/27, BIOS @ 0x000c0000/16
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xefdf0000 - 0xefdf7fff (0x8000) MX[B]
[1] -1 0xefdff000 - 0xefdfffff (0x1000) MX[B]
[2] -1 0xeffc0000 - 0xeffdffff (0x20000) MX[B]
[3] -1 0xeffff000 - 0xefffffff (0x1000) MX[B]
[4] -1 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
[5] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[6] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[7] -1 0x0000febc - 0x0000febf (0x4) IX[B]
[8] -1 0x0000fec0 - 0x0000feff (0x40) IX[B]
[9] -1 0x0000ff38 - 0x0000ff3f (0x8) IX[B]
[10] -1 0x0000ff40 - 0x0000ff7f (0x40) IX[B]
[11] -1 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[12] -1 0x0000fff0 - 0x0000ffff (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xefdf0000 - 0xefdf7fff (0x8000) MX[B]
[1] -1 0xefdff000 - 0xefdfffff (0x1000) MX[B]
[2] -1 0xeffc0000 - 0xeffdffff (0x20000) MX[B]
[3] -1 0xeffff000 - 0xefffffff (0x1000) MX[B]
[4] -1 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
[5] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[6] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[7] -1 0x0000febc - 0x0000febf (0x4) IX[B]
[8] -1 0x0000fec0 - 0x0000feff (0x40) IX[B]
[9] -1 0x0000ff38 - 0x0000ff3f (0x8) IX[B]
[10] -1 0x0000ff40 - 0x0000ff7f (0x40) IX[B]
[11] -1 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[12] -1 0x0000fff0 - 0x0000ffff (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xefdf0000 - 0xefdf7fff (0x8000) MX[B]
[6] -1 0xefdff000 - 0xefdfffff (0x1000) MX[B]
[7] -1 0xeffc0000 - 0xeffdffff (0x20000) MX[B]
[8] -1 0xeffff000 - 0xefffffff (0x1000) MX[B]
[9] -1 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
[10] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[11] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x0000febc - 0x0000febf (0x4) IX[B]
[15] -1 0x0000fec0 - 0x0000feff (0x40) IX[B]
[16] -1 0x0000ff38 - 0x0000ff3f (0x8) IX[B]
[17] -1 0x0000ff40 - 0x0000ff7f (0x40) IX[B]
[18] -1 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[19] -1 0x0000fff0 - 0x0000ffff (0x10) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.25
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) SAVAGE: driver (version 1.1.25t) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
ProSavage PN133, ProSavage KN133, SuperSavage/MX 128,
SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128,
SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64,
SuperSavage/IXC 64, SuperSavage/IXC 64, ProSavage DDR,
ProSavage DDR-K
(II) Primary Device is: PCI 01:00:0
(--) Chipset MobileSavage found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xefdf0000 - 0xefdf7fff (0x8000) MX[B]
[6] -1 0xefdff000 - 0xefdfffff (0x1000) MX[B]
[7] -1 0xeffc0000 - 0xeffdffff (0x20000) MX[B]
[8] -1 0xeffff000 - 0xefffffff (0x1000) MX[B]
[9] -1 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
[10] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[11] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x0000febc - 0x0000febf (0x4) IX[B]
[15] -1 0x0000fec0 - 0x0000feff (0x40) IX[B]
[16] -1 0x0000ff38 - 0x0000ff3f (0x8) IX[B]
[17] -1 0x0000ff40 - 0x0000ff7f (0x40) IX[B]
[18] -1 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[19] -1 0x0000fff0 - 0x0000ffff (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xefdf0000 - 0xefdf7fff (0x8000) MX[B]
[6] -1 0xefdff000 - 0xefdfffff (0x1000) MX[B]
[7] -1 0xeffc0000 - 0xeffdffff (0x20000) MX[B]
[8] -1 0xeffff000 - 0xefffffff (0x1000) MX[B]
[9] -1 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
[10] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
[11] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[12] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0x0000febc - 0x0000febf (0x4) IX[B]
[18] -1 0x0000fec0 - 0x0000feff (0x40) IX[B]
[19] -1 0x0000ff38 - 0x0000ff3f (0x8) IX[B]
[20] -1 0x0000ff40 - 0x0000ff7f (0x40) IX[B]
[21] -1 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[22] -1 0x0000fff0 - 0x0000ffff (0x10) IX[B]
[23] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[24] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(**) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
(==) SAVAGE(0): RGB weight 565
(==) SAVAGE(0): Default visual is TrueColor
(**) SAVAGE(0): Option "SWCursor"
(**) SAVAGE(0): Option "UseBIOS"
(**) SAVAGE(0): Option "ShadowStatus"
(**) SAVAGE(0): Using SW cursor
(**) SAVAGE(0): Using video BIOS to set modes
(**) SAVAGE(0): Option: ShadowStatus enabled
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(EE) SAVAGE(0): Cannot map SYS BIOS
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
Fatal server error:
xf86MapVidMem: Could not mmap framebuffer (0x00000000,0x1000) (Operation not permitted)
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
# File generated by anaconda.
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "/usr/X11R6/lib/X11/fonts/truetype/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/artwiz/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# FontPath "unix/:7100"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "dri"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Option "AutoRepeat" "500 5"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" "basic"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Modes"
Identifier "T23 modes"
Mode "1024x768"
DotClock 65
HTimings 1024 1032 1176 1344
VTimings 768 771 777 806
Flags "-hsync" "-vsync"
EndMode
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5-70
VertRefresh 50-90
Option "dpms"
EndSection
Section "Monitor"
Identifier "TV"
HorizSync 30-50
VertRefresh 60
EndSection
Section "Device"
# no known options
Identifier "S3 Savage/MX"
Driver "savage"
VendorName "S3 Savage/MX"
BoardName "S3 Savage/MX"
#Option "NoAccel"
Option "SWCursor"
#Option "HWCursor"
Option "UseBIOS"
Option "ShadowStatus"
Option "ForceInit"
BusID "PCI:1:0:0"
EndSection
Section "Device"
# no known options
Identifier "S3_TV"
Driver "savage"
VendorName "S3 Savage/MX"
BoardName "S3 Savage/MX"
#Option "NoAccel"
Option "TvOnly"
EndSection
Section "Screen"
Identifier "Screen0"
Device "S3 Savage/MX"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Identifier "TV_OUT"
Device "S3_TV"
Monitor "TV"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection
Script started on Sat Feb 8 17:42:21 2003
[01;31mkal-book [01;34mroot # [00mXFree86 -verbose 1 -xf86config
/root/XF86Config.newer
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.20-gentoo-r1 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Feb 8 17:42:37 2003
(++) Using config file: "/root/XF86Config.newer"
(==) ServerLayout "Anaconda Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "S3 Savage/MX"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc105"
(**) XKB: layout: "us"
(**) XKB: variant: "basic"
(WW) The directory "/usr/X11R6/lib/X11/fonts/artwiz/" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/truetype/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) S3 Savage/IX-MV rev 17, Mem @ 0xf0000000/27, BIOS @ 0x000c0000/16
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.0.2
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.25
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) SAVAGE: driver (version 1.1.25t) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
ProSavage PN133, ProSavage KN133, SuperSavage/MX 128,
SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128,
SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64,
SuperSavage/IXC 64, SuperSavage/IXC 64, ProSavage DDR,
ProSavage DDR-K
(--) Chipset MobileSavage found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
(**) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
(==) SAVAGE(0): RGB weight 565
(==) SAVAGE(0): Default visual is TrueColor
(**) SAVAGE(0): Using SW cursor
(**) SAVAGE(0): Using video BIOS to set modes
(**) SAVAGE(0): Option: ShadowStatus enabled
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(EE) SAVAGE(0): Cannot map SYS BIOS
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
Fatal server error:
xf86MapVidMem: Could not mmap framebuffer (0x00000000,0x1000) (Operation not permitted)
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
[01;31mkal-book [01;34mroot # [00m[Kexit
Script done on Sat Feb 8 17:42:46 2003
