I would check the log to see whether X4 is really using XF86Config-4 Lionel --- dave hoye <[EMAIL PROTECTED]> wrote: > Unable to get startx to work after upgrading from 3.3.4 to 4.1.0. > > I changed the link X link from: > > /usr/bin/X11/X -> Xwrapper > > to: > > /usr/bin/X11/X -> XFree86 > > and executed startx. The screen went blank and did not display. I re-ran >XConfigurator and > tested the configuration, and the same thing happened. Did I set something up >wrong? Or does > version not work with some 'old' video cards? > > SuperProbe results: > > First video: Super-VGA > Chipset: Cirrus CL-GD5434 (PCI Probed) > Memory: 1024 Kbytes > RAMDAC: Cirrus Logic Built-in 15/16/24-bit DAC > (with 6-bit wide lookup tables (or in 6-bit mode)) > > > XF86Config-4 follows: > > > # XFree86 4.0 configuration generated by Xconfigurator > > Section "ServerLayout" > Identifier "XFree86 Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > # By default, Red Hat Linux 6.0 and later use xfs > > Section "Files" > FontPath "unix/:7100" > EndSection > > # Module loading section > > Section "Module" > Load "dbe" # Double-buffering > Load "GLcore" # OpenGL support > Load "dri" # Direct rendering infrastructure > Load "glx" # OpenGL X protocol interface > Load "extmod" # Misc. required extensions > Load "v4l" # Video4Linux > # Load "pex5" # PHIGS for X 3D environment (obsolete) > # Load "record" # X event recorder > # Load "xie" # X Image Extension (obsolete) > # You only need the following two modules if you do not use xfs. > # Load "freetype" # TrueType font handler > # Load "type1" # Adobe Type 1 font handler > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "keyboard" > Option "XkbLayout" "us" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Device" "/dev/mouse" > Option "Protocol" "PS/2" > Option "Emulate3Buttons" "on" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Monitor" > Identifier "Acer 33D" > VendorName "Unknown" > ModelName "Unknown" > HorizSync 31.0-35.5 > VertRefresh 50.0-100.0 > Option "dpms" > EndSection > > Section "Device" > Identifier "Cirrus Logic GD543x" > Driver "cirrus" > BoardName "Unknown" > # Device section for Cirrus Logic GD5430/34-based cards. > #MemBase 0x00e00000 # ISA card that maps to 14Mb > #MemBase 0x04000000 # VLB card that maps to 64Mb > #MemBase 0x80000000 # VLB card that maps to 2048Mb > #MemBase 0x02000000 # VLB card that maps to 32Mb > #Option "linear" > # Use Option "no_bitblt" if you have graphics problems. If that fails > # try Option "noaccel". > # Refer to /usr/X11R6/lib/doc/README.cirrus. > # To allow linear addressing, uncomment the Option line and the > # address that the card maps the framebuffer to. > EndSection > > Section "Device" > Identifier "Linux Frame Buffer" > Driver "fbdev" > BoardName "Unknown" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Cirrus Logic GD543x" > Monitor "Acer 33D" > DefaultDepth 8 > Subsection "Display" > Depth 8 > Modes "640x480" > EndSubSection > EndSection > > Section "DRI" > Mode 0666 > EndSection > > XF86Config follows: > > # File generated by XConfigurator. > > # ********************************************************************** > # Refer to the XF86Config(4/5) man page for details about the format of > # this file. > # ********************************************************************** > > # ********************************************************************** > # Files section. This allows default font and rgb paths to be set > # ********************************************************************** > > Section "Files" > > # The location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > > RgbPath "/usr/X11R6/lib/X11/rgb" > > # Multiple FontPath entries are allowed (they are concatenated together) > # By default, Red Hat 6.0 and later now use a font server independent of > # the X server to render fonts. > > FontPath "unix/:7100" > > EndSection > > # ********************************************************************** > # Server flags section. > # ********************************************************************** > > Section "ServerFlags" > > # Uncomment this to cause a core dump at the spot where a signal is > # received. This may leave the console in an unusable state, but may > # provide a better stack trace in the core dump to aid in debugging > #NoTrapSignals > > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence > # This allows clients to receive this key event. > #DontZap > > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching > # sequences. This allows clients to receive these key events. > #DontZoom > > EndSection > > # ********************************************************************** > # Input devices > # ********************************************************************** > > # ********************************************************************** > # Keyboard section > # ********************************************************************** > > Section "Keyboard" > > Protocol "Standard" > > # when using XQUEUE, comment out the above line, and uncomment the > # following line > #Protocol "Xqueue" > > AutoRepeat 500 5 > > # Let the server do the NumLock processing. This should only be > # required when using pre-R6 clients > #ServerNumLock > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > #Xleds 1 2 3 > > #To set the LeftAlt to Meta, RightAlt key to ModeShift, > #RightCtl key to Compose, and ScrollLock key to ModeLock: > > LeftAlt Meta > RightAlt Meta > ScrollLock Compose > === message truncated ===
__________________________________________________ Do you Yahoo!? Yahoo! Shopping - Send Flowers for Valentine's Day http://shopping.yahoo.com _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
